Tuesday, May 20, 2014

Review: Source - Storm WXP 3L hydration bladder


Here's a much loved but oft forgotten item in my survival, training and adventuring kit. This is the
Source Storm WXP 3L hydration bladder which has seen some pretty heavy use in the past, and I thought it was fully worth showing the light of day.

Ive covered some hydration systems in the past, such as the the Platypus PIB hydration pack and several hydration bladder carriers, such as the lustful Geigrrig Tactical Guardian (I'd love to get my paws on one of these) the 0.75L version that come in the Tactical Tailor Joey hydration pouch and the backpack style Platatac Bravo pack. This isn't my first Source 3L bladder, as I failed to follow the care-and-cleaning guideline of DO NO USE BOILING WATER ... they melt. Hot enough for your hands is hot enough. More on this later.

The bladder itself is constructed from a very special three layer, coextruded polyethylene construction with a very special low maintenance liner layer. Integrated Grunge-Guard™ antimicrobial surface. This  435 micron thick surface prevents bio-film build up, my being almost glass-smooth, (Source quotes it as being  2000% smoother than standard TPU films, with virtually no difference from glass itself. This reportedly improves the systems self-cleaning function.

The wide opening access at the top opens with a slide closure for easy filling, draining and cleaning. The fold and slide lock gives a strong, airtight seal. A retaining cord ensures clumsy finders don't drop it in the muck, or let it wash downstream. It also means that you can add ice, or powdered drink supplements.

I found all the seams, including those at the tube attachment point to be very strong and well placed to take any tension that the bladder is challenged with, so far.

The drinking tube attaches to be bladder with their propriety QMT™ Quick Mate Technology hose fitting, which offers push button convenience, no leakage, and click-in compatibility with USMC Miox filter system. Sometimes the clip can be a little stiff, but hardly much of an issue for me, as I rarely took these off, except to rinse. However, even at the tube tip the QMT is completely self sealing.

This means that even with a full reservoir you can change tubes, add valves or whatever, without worrying about drips or leaks. Great for fitting a full bladder into a pack that already has a hose run through it. Sometimes hydration tube ports can be a snug fit.

The drinking tube is 94cm (37") long, and contains its own valve built in. Again, no drips or leaks when changing the tip or feeding it through bags and gear. The tube cover both insulates and blocks UV-light.

This helps your water cool and bacteria free from first to last sip. I really noticed this when doing long stretches in the sun with this. the temperature gradient from tube-to reservoir was always delightfully small.


The very cool push/pull Storm Valve isn't a bite-valve, being a pull-open plug like on a sport bottle. It apparently delivers 25% higher flow than bite designs. The integrated valve has a twist-lock which will lock the valve in the "off" position, so you don't have to worry about inadvertent leakage. It is also set at 90 degrees from the tube, which apparently reduces the required tube length (for twisting it around to have kink-free drinking) by 25cm! It also rotates 360 degrees, allowing you to place the valve end on any side of your gear, and have access to it.

It comes with a dirt-shield cover, which is also dummy-corded on, and can be cinched with a dedicated slit, to stop it from dangling and rattling about when not used.



In addition to the Widepac wide opening access at the top, with its hanging slot,  the bladder also has a screw-top opening, which incorporates a carry-yoke. The yoke can be rotated to best suit your carry style, but allows even gloved hands to hold the bladder open for refilling without contaminating the reservoir.

The gasket screws down over the yoke to hold it in place, and is also dummy-corded to the wide-mouthed cap. I have had some troubles with the gasket winding loose, and this impacting on the seal the cap gets, but if its screwed down tight, all should work out well. 

Evacuating all the air from the bladder keeps it very quiet, no canteen-sloshing noise-disipline worries there, and the placement of the tube to the bladder means you pretty much get every drop emptying out, you can even set it to run continuously, using siphoning, to get regular irrigation, or when running detergent through it to clean it. The guys at Platatac recommended throwing it, washed but not dried into the freezer as a decontamination step, which is a far better idea than melting it with overly hot water, I have to say.

This particular bladder has seen me through camping, long haul drives, and three Tough Mudders, and it's going strong! I even inflated it and used it as a flotation aid when diving off one of the "Walk the Plank" high dives on Tough Mudder.

I'd love to try one of the Universal Tube Adapter  attachments, which lets you fill the pack from the drinking valve, from taps or bottles, without having to take it off your pack or out of a pack.

Thursday, May 15, 2014

Shout out Review: PowerTravellers - Power Gorilla

Kevin Martin over at BreachBangClear has done a cool piece on a hefty ruggedized power-pack for charging his devices out in the field, for extended times.

Here's the link to his take on the PowerTravellers - Power Gorilla. This tablet sized battery boasts 20,000 mAh of charge, and you can see that Kevin put it through its paces in some pretty rough conditions.

I've covered a couple of power-generation devices in past, the thermoelectric Tellurex-tPod1, and a wish lust BioLight campstove to generate power, solar systems like those found on the SLXtreme iPhone case and the other small solar systems I have tried
but as yet haven't really covered how to STORE that power, other than in those built-in devices. Worth checking out Kevin's findings, for sure!


Tuesday, May 13, 2014

Events: Tough Mudder #4 March 2014


I did my fourth Tough Mudder in March, which earned me both a green (x2) and a PINK (x3-6) Mudder headband.

It was also my first TM solo, whereas before I'd run it with teams of work-mates, or friends, this time I just tackled it on my own, along with the other 20,000 or so people who did it this time around. It was a slightly overcast and chilly day, and I was very glad that I had set myself up with my gear with this in mind.

This time around, as I had done previously, I geared up in all my "Zombie Control Officer" get-up, some for show, some for practical reasons. The core of my outfit was again the
FirstSpear OAGRE tactical vest which I've worn to all but my first of these adventure runs. This vest has given me both a platform to attach my accessories, but also provided me with a modicum of abrasion resistance, not to mention keeping my shorts on during some of the hairier moments, with its built in belt-attachment loops.

I mounted a set of Platatac twin 40mm pouches to my left side, which I filled with energy bars. On my right side, I mounted a Platatac SR25 pouch for another energy bar, a magnet to switch on and off my Contour GPS camera which has trouble in its waterproof case (see below). I would have also kept my spare battery for the Contour in there too, in a double-ziplocked baggie, as I've done in past, but alas, I couldn't find the damn thing till the week after the event, stuck in the bottom of a cable-jar.

On top of the vest I wore the same Platatac admin pouch as I had previously, with a cyalume stick, permanent marker and a small laminated map of the course. I tracked my progress, marked off obstacles and marked times as I went. I also lucked a large LARP foam fighting knife behind it, for photo-ops and in case any of my fellow competitors wanted to "go zombie" at me. No one did, haha. My loss. Wearing my Z.E.R.T. membership shield, call sign (Q3199) I got a lot of nods from the other costumed participants.

Also on my chest rig, I wore the UVPaqlite for power-fee solar dark-space navigation, and on my shoulder, opposite the ITW-Nexus Picatinny mount for the Contour, my PrincetonTEC Switch MPLS-light, which alas didn't survive the course, and judging from the few photos I found, looks like it came off at least in the first third of the course. Makes me sad, but I guess I'm in the market for a new helmet light...

I wore a Platatac Punisher-2014 CUS shirt under the OAGRE, which kept me cool but not cold, dried quickly and chafing free for all 23km of course.I clipped my bib number to my MOLLE with plastic side-opening ALICE clips.

I wore running skins under my TripleAughtDesign Amphibious Shorts which cut down on abrasions even further, and kept me a little warmer when the wind hit us. They also helped keep my BlackHawk! kneepads on and in place, and again, without the bleeding hamstring regions I've had previously. Skins are definitely an endurance asset. This time around I also opted to wear my BlackHawk! elbow pads too, which cut down on my elbow gravel-rash immensely. A little cumbersome, and made getting hauled up by helping hands a little more challenging, but so worth it. Between the skins, the knee and elbow pads you could hardly tell I'd done the course (apart from the usual behind-the-thigh bruises) just a day or two after.

I had a Source 3L WXP storm bladder on my back again, in an early strapless version of the Platatac Bravo hydration system, which was PALS/MOLLE locked on tight to the OAGRE vest.

This time I also wore my Paleo- Barefoots ANTERA paws with the neoprene inserts, the PAWS dots made a heap of difference, giving me all the grip I needed on events like "Twinkle Toes", which was a wet-beam crossing, and running up the quarter pipe of Everest. I also wore the Paleo-Barefoots BAMANOS paws, giving them their first big outing for me. Unfortunately, in their current form, without a lining, they chewed up my hands quite a lot.

I've passed on feedback to Jörg of GoSt Barefoots, and the roughness I felt when wearing them, especially on the hang-by-your-hands obstacles like the "just the tip" vertical wall-crawl, the "Funky Monkey" monkey-bars and "Leap of Faith" (jump off a platform, over water and climb up a dangling cargo-net, my favourite obstacle of the course.)

I completed the course around 45 minutes faster than my previous times, which included an extra kilometer of "Legionnaire" veteran course, and four extra obstacles. The Powerade / energy bar combination meant that I didn't stop running for water or snacks the entire time. My map was a great morale boost, as well as helping me keep my orienteering awareness up.

These events are a great hobby for me, they test my body, determination and gear.




Here's a shot of me fiddling with my camera, when in its case I need to use a magnet to switch it on and off, which isn't always easily done. Especially when all caked in mud.


I only managed to get a couple of clips from this Tough Mudder, because of problems with the switch. Don't mind the muddy banter ....



I had a really good time, signed up for the next Melbourne event on the day, and made it home in time for dinner.

Thursday, May 8, 2014

Review: Platatac Light Weight Long Sleeve top

Following up on my recent long sleeve DriFire post and because it's still cooling down here, I thought I'd cover several of my other long-sleeve tops, much like the TruSpec Combat shirt I covered last winter.

I like to watch eBay for the occasional one-off item from brands like Platatac, much as it pains me when I don't have the disposable income, or when out-bid. However, this is one such item.

This is a "Lightweight Long Sleeve" top, from Platatac. Made from 100% cotton, it is a lot like a very much cut-down version of their CUTS pattern shirts, with none of the frills, just similar lines. I really liked that even in only a L size, which meant my super-long arms run a bit short, the waist length is super long, well below my hips. 


This means it sticks in my pants no matter what I'm up to, keeping my skin covered up in all circumstances, like a base-layer should.

Being a cotton garment, you need to consider the risks of wearing it in cold and wet survival situations but that can just be a matter of good planning and situational awareness.

One of the things I rerally liked about this design (and this follows with the CUTS designs too), are the high mandarin collar gives great protection from both the elements (sun/wind/sand/grit) but also shields against chafing and rubbing when wearing harnesses, plate carriers and tightly strapped packs. 

The chest-level zipper, lets you vent, when you aren't worried about covering up as much, and frankly, lets your inner "hello ladies" out.

When I need to either block the sun, or keep warm in the cold and dry, this is the kind of thing I look to have as a base-layer. Keeps we draft-free, nonrestrictive and takes up little to no room for adding more layers.


Tuesday, May 6, 2014

Video Reviews: AK -Super Colubris, UC M48 Walking Axe, Skinning Axe, ZT - Deuce

Here are a few clips I've been saving for a rainy day, and there have been quite a few of these recently.

1. Kitchen knives and a pig head


2. American Kami Super Colubris vs pig head

My full review here:

3. United Cutlery M48 Walking Axe vs pig head

My full review here:
Follow up review here:

4. skinning axe-knife thing, vs pig head


5. Zombie Tools Deuce vs pig head

My full review here:

I hope you enjoyed these as much as I did making them, if there is anything else you'd like to see my cutting with, or cutting into, please drop me a line, and I'll see what I can do for you.

All bio-waste either goes to the pot, or to the critters. No wastage, no freeloaders...

Sunday, May 4, 2014

Review: DRIFIRE Lightweight Long sleeve tee

The weather has turned here, and it's been time to break out the longer sleeves. My first selection, was this light but warm number from DRIFIRE, the Lightweight long-sleeve tee from their Layering Shirts and Tops range.

I got mine in XL, because of my super long arms, but was pleased to find it didn't swim on me, I assume this is due to the skin-snug fit they generally get worn with.

Some of the nice features of this shirt are that the ribbed collar maintains its shape, keeping it high and snug, without being constrictive. The soft fabric has given me no troubles with chafing, no matter what I've been doing, or how I've been layered.
Better yet, the antimicrobial blend of fabrics is designed to resist odor (proven after several days camp-side wear). It is also moisture-wicking and fast-drying, not through any coatings or washes, but through the propriety materials used. they wont wash out, or wear out.

Best yet, DRIFIRE gear is made with no-melt, no-drip fabrics, so apparently they will not melt or fuse to skin when exposed to flame or fire.  This is excellent, as I really do not like being on fire. It's one of my least favourite things. Fire resistant clothes. This is a feature I'm willing to stake my skin on. Hopefully not one I'll put to the test though.

The seams are well placed, and flat woven, which also cuts down on the chafing risk, especially when laden down with pack straps or under a plate carrier.

For a long sleeve  street-wear alternative to my other regular stand by, like the Truspec combat shirt or the short sleeve UnderArmor shirts I really like this shirt. Feels like a soft cotton tee, wears like a performance garment.

Tuesday, April 29, 2014

Review: Arena FlackJak goggles

I picked up a set of goggles a while back which I have added to my gardening, crafting and disaster preparedness kit. It's been a whiles since I have had a big set of goggles, my last set being a paintball mask, as I've made do with safety glasses or my much loved (and currently broken) Barz Optics goggles glasses to protect my eyeballs, in a way that my slim glasses just don't.

High speed fragments, harsh chemicals, dust and smoke in the eyeballs are just no fun and will ruin both your day and survival odds, which is why I look for ways to protect mine.



These are the Arena Flakjak goggles as seen under my Ops-Core style bump helmet This is the kind of setting they are specifically designed for, and you can see by the sleek fit, they really marry nicely with the brim of the helmet. They even fit my glasses reasonably well, although there is always a little skew one way or another when nose piece shares space with nose frame.

Arena state that their goggles feature what they call Razorback technology, which deals with fogging, particulate and moisture, by providing the a good airflow rate with a really interesting ridged vented filtration to create non-fogging conditions behind the lens while preventing debris like sand, moisture, and flying debris to enter the goggles.


The lens itself as well as the anti-fogging coatings, features OptiWide geometry which really makes for some really good optical clarity and distortion free peripheral vision to at least as far as I can see clearly with my glasses on, and only reduces my overall angle of vision by about 2cm or so at each side.

The lens material is ballistically designed for maximal eye safety exceeds Z87.1 - 2003 Plus standard and meets MIL-STD-662F (as related to .22 caliber, 17 grain, Type 2 fragment simulating projectile) standards. Which means my assertion for using it for for yard and craft work is probably spot on. Power tool fragments are not your friend.

One really nice feature of the goggles are the Buckle Management Retention Fastener (BMRF). This system allows for both quick and easy strap replacement, but also sturdy fitting both over a helmet, and against your bare head. The fits are quite different, and the rotating fastener really allows for this.

The modular buckle system also provides the goggles to integrate with a variety of helmet platforms, I tried it with my bump helmet, but also my Pro-tec Classic helmet and a couple of the hard-hats I have laying around.


One really important feature of any goggle is the lining and seal. The lining of these are made of the VS Foam, which is a proprietary goggle foam designed to wick moisture away from your face. The surface is comfortable, and the body both compressed enough to make for a good seal, but also not so soft as to over-compress.

I recently took them out for a running test which gave them a pretty good test of the fogging as well as the fit.

The certainly fit very nicely, were stable and very comfortable, but after about a km in, at 12kph, they began to fog up, and stayed that way, on or off, for the duration of the run.


I suspect that in a dry environment, they would probably work out pretty well, or perhaps if there had been more of a breeze, and a third party de-fogging treatment might well prove effective. It was a shame to find how fogged they became, as I can imagine in a hostile environment, or undergoing other strenuous activity (as I'd also found this to happen whilst doing some grinding and drilling and home) that this could be quite a risk to be aware of.

Still, I'd rather have some goggles than NOT have some goggles, and these will certainly have their place in my preparedness kit, to be sure. 





Related Posts Plugin for WordPress, Blogger...