Review: Platatac - Cool Under Tactical Shirt

Here's an item I had completely overlooked in the back of Tactical Baby's wardrobe (where I've taken to storing my less-often worn gear, as she hasn't yet accumulated a whole lot of outfits, and only the one camo vets ...) I pulled it out as part of a upcoming post detailing different camo in an Australian setting. I wanted to test out DPM pattern and remembered I had a shirt to go with my pants. It turns out that shirt was one of the very cool 

Platatac’s CUTS (Cool Under Tactical Shirt) and I wanted to tell you a thing to two about the CUTS design.

The CUTS Special Projects is Platatac's next generation in under armour tactical uniform shirts.

The CUTS are specifically designed as an improvement over standard BDU shirts, with lightweight, moisture wicking fabric in areas where body armour contacts the body. This aims to promote cooling when using body armour in hot environments.

The shoulders are constructed from 3D air mesh giving padding for both comfort when using load bearing equipment and airflow.

The sleeves are constructed from a heavy 100% Cotton ripstop fabric which is built to last. The sleeves also feature upper arm pockets with two sets of loop-fields each allowing the attachment of multiple patches and also include a webbing flap allowing the wearer to secret a IR Square with minimal effort.

On the version I have, there is also a axillary pocket on the left forearm for use as a map panel, much like the wrist mounted Recce wrist pouch , as well as twin elbow patches, which will take elbow pads, and are held in place by hook-and-loop tabs.

The cuffs are able to be cinched in with hook-and-loop straps to eliminate drafts and cover up exposed skin.  The neckline has a half-zip, to give you good venting when you need, and also features a hook-and-loop fixing mandarin high-collar, which keeps stray brass, grit and bugs out.

It has a really good, long fit, something I really look for in a shirt, as I have a long body, and even longer arms so having a full length shirt keeps my shirt tails tucked in, and my wrists covered up.

The material on the torso is very comfortable, especially under load, and whilst the cotton of the sleeves is fairly heavy, they bear up to rough use really well. I've crawled around in the scrub and run through brush with this, and had not had any trouble.

These are a pretty technical garment, but if you find yourself in rough environments, wearing packs or chest-rigs this is the kind of shirt you'll want to have.

Events: Security Expo 2015

I had the good fortune to be invited to attend the 2015 Australian Security Exhibition & Conference a couple of weeks ago, which shows it pays to stay in touch with local industry events, so I took a long lunch one day and attended.

The Security Exhibition Conference is the most highly recognized security industry event in Australasia. This year was its 30th anniversary.   The event is billed as the must-attend event for all security professionals from installers and integrators to end users. It's not exactly my comfort zone, and it was great to see what other new industries show themselves to their peers.

The Security Exhibition showcased  170 leading brands in one place and allowed visitors to identify the newest and brightest industry innovations. My best explanation for what I saw, is that there were cameras. Lots of cameras. 3/5 of the expo was camera or camera related.

Thermal cameras, low light cameras, super hi-def cameras. Cameras in does, cameras on poles, cameras on drones. All the downstream systems to process all of that, facial recognition systems, networking, storage, scanning systems. A lot of camera stuff.

About 1/5 of the expo was access-control: ID badges, doors, code-pads, RFID scanners, readers and writers, and the like. Some locks and barrier systems too.

One thing I noted that was curiously absent, from my way of thinking was any counter-technology. There were no lock-picks, code-breakers, spoofers or any other sort of bypass tools, but I suppose that kind of thing might be at an even more secret expo.

Even then, getting into the Security Exhibition & Conference isn't that easy. I had media-type entry, but otherwise they accept professionals in the security industry and end users responsible for sourcing the latest products, services and technologies to manage security threats and protect vital business assets. Entry is otherwise restricted to industry professionals only. People not in this category are not be admitted at any time. Proof of identity and industry involvement may be requested at the door, I had my patches on, and cards at hand, but wasn't challenged, having been invited.

It was a very interesting event to visit, and I made a couple of contacts that I will be following up, such as with Defence Systems Australia, so stay tuned for a post about them. If you are interested and actively in industrial and corporate security I'd heartily recommend attending.

Probably not too useful to the backyard prepper and urban scavenger, unless you're into grey-hatting.

Review: Smart Wrench

Here's a little tool that I backed on Kickstarter, and was really expecting big things from. The idea was elegantly simple. A CNC milled titanium ratcheting wrench, with storage for additional drivers built-in the housing. 

It was a relatively small project, and only had low numbers, due in no small measure I suspect to the high price, but at the time I was flush, and eager to add some more multi-capable titanium tools to my collection.

The development was a bit slow, but we had design and prototype pictures along the way, and this is often the case with first-time Kickstarters, so I didn't worry much. Eventually, the tool arrived, and I was really impressed with the beauty of the thing. Smooth lines, lovely graduations and a very smooth screw-on tool housing in the handle. The tool bits were also very nicely produced, and nested really well, without any significant rattle when fully stowed.

The bits included are: 2mm, 2.5mm, 3mm, 4mm, 5mm hex bits, and a flathead bit, all CNC turned from the same Grade 5 titanium alloy (commonly known as Ti6Al4V) as the rest of the tool.

The extender bar that marries to each of the bits to the wrench body has a rubber o-ring on the tool-mating head, as well as the two sides where the extended marries to the wrench. These bind the bits to the bar, and the bar to the tool by friction, some other users commented eu were disappointed that a ball-bearing indent attachment wasn't offered, but it seems to work well enough for me.

The ratchet has a cute engraving to indicate the direction of ratcheting to use, but here is where the tools biggest fault lies. The ratchet slips extensively, and either doesn't catch at all, or slips under what I would call "normal use" in hand tightening or loosening bolts, screws and the like. 

I was really disappointed with this, and it seems my fellow backers were too. Such a beautifuly put together tool, and when it comes to the primary action, such a disappointment. With some angling, you can get a better or worse ratcheting action, but even then, it's barely functional. 

Considering I'd want to be using for small electronics and devices access, where bolts are often held in with Loctite glue, and need a fair amount of delicately applied torque to initially shift. Outstanding ergonomic and practical design, such a let down for the functional basis of the tool.

Events: Nagasaki 70 years on

What if the 1945 "Fat Man" bomb was dropped on Melbourne today?

Following on from my "Trinity Day" post a few short weeks ago, a chilling reminder. It is now 70 years ago since, on August 9th, 1945, at 11:01:47am the Fat Man bomb exploded some 500m above Nagasaki, Japan, outright killing between approximately 39,000 and 80,000 people. The blast was estimated at around 20kt, and it set fires through the mostly wood and paper construction of the city that left it devastated, even before the radiation effects began to manifest.

What if a 10kt "dirty bomb" was detonated in downtown Melbourne?

Some very clever people at Stevens Institute of Technology, namely nuclear historian Alex Wellerstein developed  “NukeMap” which allows you to overlap various atomic and nuclear events over a regular GoogleMaps view. You've seen this kind of effect with the Sea-Levels which I discussed in my Rising Sea-Levels post. The NukeMap application demonstrates the estimated (and extrapolated from actual tests) effects of these weapons on built-up areas, including "Fireball radius", "20psi Air Blast radius", "5psi Air Blast radius", Radiation Radius" and "Thermal Radiation Radius", each with a descriptor of the kinds of damages you could expect to see, and survivability of those effects.

What if the currently deployed 800kt Russian "Topol SS-25" ICBM munition was dropped on Melbourne?

It also then overlays that with estimated population density in the areas covered by the various zones, and estimates immediate fatalities, and injuries. For explosions of either sufficient size, or proximity to the ground to kick up fallout (high air-busts hit harder, and wider, but don't kick up as much fallout, it's inefficient to do so, apparently), NukeMaps will also plot prevailing winds and density of fallout.

What if the currently deployed 800kt Russian "Topol SS-25" ICBM munition was detonated in downtown Melbourne?

You can pick your location, and from a variety of historically documented devices, from the North Korean tests, Pakistani and Indianweapons, the Trinity and WW2 bombs, all the way up through the Cold War era tests and production weapons, from estimated improvised terrorist weapons to the state-irradiating Tsar Bomba weapon.

Its a very sobering tool to visualize both the destructive capacity we have been capable of for the past 80 years, but also as a reminder of how fortunate we are to have only ever had these forces brought to bare in anger only twice.

Review: Platatac - S&M Side Opening Pouch

I follow a couple of gear swap-buy-sell groups online, and every now and then something comes up that piques my interest. The last time was my Condor Plate Carrier, which I've enjoyed running in at a few events, and was value for money second hand, for my purposes. A bonus from that deal was the carrier had a couple of extra pouches that the guy "threw into the deal". One of these was the pretty recent Platatac S&M Side opening pouch. I hadn't thought to get one of these of its own merit, but having had one in my collection now, I can see this may have been a mistake.

One of the first things I noted was that it looked quite different to my other Platatac pouches, which mostly run into the magazine pouch category, but certainly had the same quality of construction that I'd expect of their products. Constructed of 1000d Cordura, and double stitched throughout. The big-enough to be strong, small enough to keep grit out No.10 YKK zipper wraps around three of the four sides, but interestingly, not top to bottom, but from the side. The twin zipper pulls are equipped with nylon extenders which are grippy, but snag-free.


One of the things I really liked about this design is that the front panel has a broad lip, that can completely wrap over the zipper, giving you a fully Cordura enclosure, even of the pouch isn't fully zipped up, and eliminating rattle, and giving further dust and water protection. Inside, the pouch measures 15cm (6") x 10cm (4") x 4.5cm (1.75"), giving you quite a lot of capacity for personal electronics, like a GPS unit, strobes, a survival tin or small medical kit, or even snacks or drinks.

The internal of the pouch only has one feature in particular, a wide, broad band of elastic webbing, too big for the strobes I have, but perfect for a 600mL bottle sized item. No extra flaps, pockets or anything to get in the way. One thing that was obvious though is that all the seams were really well finished off, no bare edges or seams to catch or fray. The non-zipper side features a big chunky drainage grommet, which even though it's on a vertical face, gives a good headphone jack access point, or dummy-cord lashing point.

Attachment is via twin channel PALS/MOLLE straps and takes three rows, to give a pretty solid connection. The "handedness" of the pouch is simply governed by flipping the way you attach the pouch, with the PALS/MOLLE connectors feeding "up" rather than "down" to have the opening side either way. I've been using this pouch on my baby-poo khaki-green gear, and Multcam, but threw it onto my black pack for contrast, but really, it's smooth lines and snag free profile don't really make it stand out. Perfect for all your small S&M needs. Cuffs and gags, anyone?

Reblogging: Target as a bug-out-locaton

My awesome partner Omega is constantly on the lookout for articles and gear for me. She turned up a great one, from Kayla of Chicago who has a Tumblr blog. Kayla came up with a very similar assessment for Target as a bug-out-location as I have done for Bunnings, and Ikea


If there was a zombie apocalypse the best place to go would be Target.
Lets look at the facts:

• Targets have at maximum 3 windows. And those windows are also doors. Otherwise they are giant concrete cinder-blocks of prison like retail. 
• Target is filled with things to quickly barricade those window-doors. such as entire gazebos, lawn furniture, exercise equipment, etc. 
• From that point forward all you have to do is worry about the zombies that are inside.

 Follow the rest of Kyla's post here:
http://kaylapocalypse.tumblr.com/post/121358772274/if-there-was-a-zombie-apocalypse-the-best-place

Too much pistol?

Do you own a pistol? If so, I'd love to hear your feelings about it. I don't, as legislative requirements (and costs, to be fair) to do so are more than I want to go through for what would be for me, just a hobby. However, I know that some of you readers do, so I have some honest questions for you, regarding how, what and why. I'd love to hear your stories, and to report them back in a future article, with your permission.
What it come down to is:
How much pistol is too much pistol?


-"I'm looking for a really big gun, that holds a lot of bullets" - Kuffs (1992)

what is your current go-to pistol?
what caliber and cartridge, and was this a deciding feature?
what is your motivation to own a firearm?
what was your motivation to carry a firearm?
do you open-carry, concealed-carry or store-secure?
what features of your pistol made it appealing for your use?
what training have you had?
what regular training do you perform?

Feel free to comment below, or send me an email at
Apocalypseequipped@gmail.com if you'd like to answer some, any or all of those questions for me to use in an upcoming article.