Home Front: Modscape house

I came across this interesting house design, by Modscape.com.au which piqued my interest, as I always look out for good fall-back positions, or even first-front positions. I've covered walled security for homes in the past, and walled storage facilities I've also covered my own home and why it's not all that well suited to sticking out a disaster, so it's interesting to see a purpose built place, and not all that far from myself.

The design brief of this home was to "create an airy pavilion that takes advantage of the views while providing a private haven from the busy road below". Rendered brick walls frame the home to create a protective compound which not only the provides the homeowner privacy, but ensures the home is secure. The home’s long, linear form takes advantage of the northern sun and visually connects to the bush and mountain landscape beyond.

Here is the link to the house design brief.

This modular home, in Berry, NSW,  creates a private home behind security walls for the clients who were based in my own home town of Melbourne.

All of the services are concealed from view behind the high walls, with visitors entering via a large pivoting door that penetrates the wall. They then move through a timber battened walkway where dappled light from the surrounding bushland filters through before entering into the double height entrance space. The main living zone opens out to the north-facing courtyard.

Meeting all the functional requirements of modern, sustainable design, the home has a total floor area of 465 sqm and consists of 11 modular sections with a large, open plan kitchen/living/dining area at its heart. A timber joinery core conceals services such as butler’s pantry, laundry and bathroom and houses a staircase leading to an upstairs area. It should be noted that that upstairs area is exposed and visible from the outside of the walls.

The finished palette is minimal and modest with timber, concrete and zinc used in an uncomplicated manner create a design that is humble and nondescript. All landscaping, including the pool, was also coordinated by Modscape.

FEATURES
Open plan kitchen/living/dining
2 bedrooms with joint ensuite
Guest bedroom
Upstairs "music" room
Butler’s pantry + laundry
2 car garage + workshop
Ribbon strip timber cladding
Landscaping including pool
Hydronic heating
Grid connect solar
Built to Bushfire Attack Level (BAL) 29

Looking at the plans, and the layout, including both the property selected, but also the way it sets in to the surrounding areas, offering security through obscurity, I can see the real value in having a property such as this. Putting in extra rain collection reservoirs, solar and/or wind power generation and a fuel reservoir, vegetable beds and perhaps chicken runs to set up a more self-sustainable setup, you have quite a secure (from mundane risks) and off-grid home to fall back on.

Review: Camoflague in an Aussie setting

A while ago I had the thought to take a bunch of my camo gear out into the bush and do a compare and contrast of several different colour and pattern schemes. I also wanted to do so to show off the kinds of terrain I can expect to encounter in my local region and showcase that for you all.

In my collection I have the following,
3-Colour Desert Cam
Arid AUSCAM DCPU
AUSCAM DCPU hearts and bunnies
British Woodland DPM
US Woodland
ATACS-AU
MultiCam

All laid out, they make a pretty discordant pile ...

Read the rest of my findings on Breach Bang & Clear



Brown in the Scrub

3-Colour Desert Cam in the Scrub

Arid AUSCAM DCPU in Scrub

AUSCAM DCPU in the Scrub

Woodland DPM in the Scrub

Woodland in the Bush

Multicam in the Scrub

ATACS-AU in the Scrub

Brown in the bush

3-Colour Desert Cam in the Bush

Arid AUSCAM DCPU in the Bush

AUSCAM DCPU in the Bush

Woodland DPM in the Bush

Woodland in the Bush

ATACS-AU in the Bush

Multicam in the Bush

 

Wish Lust: Disgruntled Deck

Just surviving the Apocalypse isn't necessarily enough, sometimes morale is needed, and keeping spirits up can be key to that. Games make an excellent tool for doing that, and something as simple as a deck of cards have been included in packs and duffels for a long, long time for that very reason. A deck of 52 though, lacks a certain humorous element, which is where something like Cards Against Humanity comes in. However, they themselves lack a certain saltyness, which is where the Kickstarter for Disgruntled Decks excels.  

 

Disgruntled Decks is a card game for military service members and grizzled Veterans who enjoy getting together and laughing about their time in the service. Disgruntled Decks can be played by itself or integrated with a Cards Against Humanity deck.

The creators titled this first deck "The Army Edition" because it features some topics that would be familiar to U.S. Army Soldiers and Veterans. However, there are more than enough general military cards to make the game enjoyable for service members and Veterans from any branch of the armed forces.

The game works just like the now very popular Cards Against Humanity game.

The "Card Commander" will read aloud an OD green Mission Card and "Subordinate" players will submit their grey Course of Action (COA) cards with possible answers.

The Card Commander chooses the best COA regardless of the Subordinates' opinions, just like in the military! You win by having the most COAs chosen. It's that simple!

The deck is composed of 90 OD green Mission Cards and 310 grey Course of Action cards. For those with poor ASVAB scores, that equals 400 cards!

Here's a fun fact about the card design:

- The font is a typewriter font found on portable typewriters used during WWII. In other words, your grandpa killed Nazis and then typed out his AAR or a love letter in this font. Nice.

Another really nice thing about this project is in the backer levels, you can opt to get a set for yourself, and have another gifted to a wounded veteran, bringing some much needed dark joy to someone who could probably do with some.

Disgruntled Decks is shipping to selected non US locations, so I jumped on it, but if you don't need outside of US shipping, and are keen on adding another similar project, you could also look into War Games LLC's FUBAR, another salty and dark, military themed game, which is also cross compatible with Cards Against humanity.

Or get both, get extra fun-times for your stretch in the bunker!

Review: BackCountryCuisine Instant meals - Roast Chicken

As my second part in the four dehydrated meals reviews I have been doing,  I will cover the Backcountry Cuisine "Roast Chicken" meal.

The first of these reviews, on the Outdoor Gourmet Butter Chicken meal was published on Breach Bang Clear, and I had some interesting feedback on it. Go check it out here... The principle is the same, the plasticised foil retort is both the cook-pot, the serving dish and eating bowl.

The Roast Chicken meal weighs in at 175g (6.2oz) tender chicken in little squares, vegetables and stuffing smothered in gravy and then served with the mashed potato. You simply add 220mL of hot water to the mashed potato sachet and 250mL hot water to the chicken meal sachet, stir and let stand for 10 minutes. The result is a delicious hot meal wherever you may be.

About half way down the retort a second tear tab on all pouches allows you to tear the lower perforation and use the pouch as a bowl once the food has reconstituted. It's a great idea and saves getting messy hands when using your spoon or fork, but be sure to tear carefully or you can make a hot mess of the meal. It might even be an idea to cut it into a bowl, to be sure. You have a knife with you, right?

The mashed potato comes in a separate retort, stored inside the main retort, which is good in that it allows you to serve it separately and keeps it from becoming a thick sludgy mess. I found the texture of the main meal to be really appealing, with the mashed potato being fairly standard for instant mash. The flavour balance was good, and it wasn't too salty.

The waiting time wasn't too bad, especially from water brought to a fast simmer, through to eating it only took 15 minutes.

One thing that I found was important, but not required was to have a flat surface to plop them down on as they are reconstituting, but the retorts fan-out from the bottom as part of their design, but I think they did better from standing up than laying down. One good thing however, was that the zip-lock top seal allows you to squeeze-mix the contents to reconstitute your food. This made me feel like an astronaut, given food served on the ISS.

Nutritionally, the whole meal makes up 1549 kJ (370 Cal) which Back Country Cuisine state is 18% daily intake requirement, so it's not a hefty food source, but being light, you could pack a bunch of them, and if you had three a day, that's 54%, so don't leave out the snacks when you're packing.

One thing I found was that the mashed potato didn't quite reconstitute properly, and when I spooned it out, I found some dry patches, but by mixing it up when in a separate bowl, it all came good. All in all, this was a really good meal and I enjoyed it, it was tasty.



Well worth adding to your pack if you are wanting to travel light, but also want a home-cooked style meal.

Be sure to pack enough potable water, or have access to enough wherever you are going, and enough to balance out your hydration as you go.

Viking Hardware piece

Raiding season is fast approaching, and many of you are yearning for adventure, salt-spray on your faces and the chance to prove your honor and win glory such that your forefathers and old-fathers  will sing your name and your children will ask to hear the stories again in the long winter of next winter.

But where you might find yourself loading up with kevlar and lead-spitting black rifles, and hopping in and out of HUVEE or MRAP, crossing seas aboard a C-130 or C-5, I thought I might cast your minds back some 1000 years to another group of hard-handed and steely eyed warriors plying their trade, by blood, fire and steel, as well as actual tradeable goods, the Vikings. I wanted to tell you a little about their wargear, and why it worked so well for them.


Read the rest on Breach Bang & Clear ...

First Impressions review: First Tactical - MDL

Here's a quick "first impressions" piece on one of two items that arrived in my pouch from the good folks at First Tactical. First Tactical is an exciting new business founded by Dan Costa, founder of 5.11 Tactical, to meet the needs of all kids of Public Safety professionals with new, innovative ideas and products in the tactical industry. But enough of the waffle, let's see the light.


Read more about the First Tactical - Medium Duty Light here, on Breach Bang & Clear

Review: HHA ASOT-01

I've finally gotten my hands on one of the much desired Hardcore Hardware Australia ASOT-01's for my very own, as part of my Giftmas haul, and I'm finally getting around to telling you about it, now that I have had it in my grabby-hands for a little while. I had covered this blade after it came out in a Wish-Lust piece, as well as getting to pay with one again at the SSAA SHOT show.
 
We have a few of the HHA items in the household, with a TWI-02 Tactical Writing Implement , and two of their smaller knives, the LFK-05 and LFK-02 blades.
Putting my three most similar blades together, you can see how the ASOT-01 compares to with the ZU Bladeworx Mekanik and the very deadly Benchmade SOCP CQB.
 
The distinct bevelled ring design of the ASOT-01 enhances the tool's accessibility and comfort, making it exceptionally fast and easy to draw. The ring is very comfortable, and the inwards scalloping wasn't at all troublesome as I had thought it might have been. The ring, much like that of the SOCP also enables transition to a rifle or hand-gun with no disconnection between the tool and firearm.
 
That scalloped thumb recess at the top of the ring supports a positive grip and for the application of downward force, opening cans of whoop-ass and the like.
 
Unique to the ASOT-01 is its "live edge identifier" knob at three quarters along the length of the handle. This enables the user to quickly identify the position of the single-sided cutting edge by feel. Good for in the dark, or when your blade is obscured. I really liked this feature, it made for a fast steady draw as well as keeping it firmly in the right orientation.
 
 

The personalised mounting provided with the ASOT is based on the ambidextrous kydex sheath it comes with along with Tek-Lok and Molle-Lok mounting options. Customised for vertical, horizontal or angled wear the mounting is further expanded by the provision of eyelet holes along both sides of the sheath to facilitate alternative attachment to the body or gear with paracord, cable ties or the like.
 
With its low profile design which allows the tool to be sandwiched on or behind magazine/accessory pouches, or horizontally along the belt line to maintain optimum concealment and retention. However, the sheath adds considerable width, which limits where you can place it somewhat, but not so much as to be impossible.
 
Made from 6mm (0.236") D2 tool steel stock, it can withstand some substantial impact without loss of sharpness. Halfway down the sharp edge, serrations have been cut into the blade to aid in the performance for more demanding cutting tasks.
 
 
The blade is 100 mm (3.93") long, with an overall length of 198 mm (7.79") and 27 mm (1.06") wide. When its its widest, it's 40 mm (1.57") wide. The blade with it's G10 handles weighs in at 120 g (0.26 lb) which is not bad for the size it is. The D2 steel is thick, and dense, but the very narrow throat and ringed end.
 
In its friction locked sheath, its 205 mm (8.07") long, and 60 mm (2.36") wide and weighs in at 160 g (0.35 lb). Again, the width makes it much more like a belt knife rather than the dagger effect of the SOCP.
 
The ASOT-01 is a non-prohibited design, single edged but ready to grind down on the back side of the blade, something the guys at Platatac have told me that Operational Operators Operating have been known to do. As always with this kind of knife, please check your local State laws in relation to knife ownership and carry.
 
[EDIT - 26/2/2016]
The good folks at Hardcore Hardware Australia dropped me a line with several words of caution, and I'm only too happy to agree with them -
 
"Josh, we do not advocate the re-grinding of our tools; such practices void HHA’s warranty. What you are suggesting in your review in this regard also constitutes a breach of Victoria State Law; I would be inclined to re-think this approach. Thank you in advance for your co-operation. HHA"
 
I'd rather touch-up a paining in a gallery with a crayon than re-grind one of their blades myself, it's nerve-wracking enough to sharpen them right.