Review: Hazard4 - Ventrapack

I've been really pleased with the Hazard4 LaunchPad iPad case, and the Loader RG holster harness that I have covered previously. The Loader RG harness is part of my EDC, I don't feel dressed without it. 

 When I placed my last order with Hazard4, I picked up a couple of items, and this was one of them. I have covered a couple of admin pouches before, and am a big fan of my ZuluNylonGear CAOS pouch, as well as my really good Hill People Gear Runner Bag.

This is the Hazard5 low-profile chest rig, the Ventrapack.
The first thing I found was that it was considerably bigger than I had expected, at 31 x 26.5 x 3 cm (12.2" x 10.4" x 1.2"), if I had checked their website or even counted PALS/ MOLLE strips, I would have worked this out. However, size is not a concern for me. Sure, it matters, but I like variety! 

With 6 channels and 4 rows of PALS/MOLLE, and two rows of loop-field, you get an idea of the size here. A Faastex style clip on the front gives a quick secure option, as well as the twin zipper releases around the perimeter. This then reveals the interior, which is really very cool. 

Webbing retainers hold the "front" of the platform, to make a shelf, with an included clear document/map window with a stiffened and quilted padded micro-suede backing (much like in the LaunchPad) with two little hook and loop tabs which fits and secures an iPad nicely. A cable feed port is a really nice addition.

That shelf also acts as a work-space, which is matched by a tool shop's worth of storage on the "back" of the platform. Three pen holders, Two multi-tool sized pockets, twin elasticised cylyme/small tool holders on top of a wide but shallow pocket make the first row of pockets, with a second layer with two PDA sized pockets, and a wide and tall, hook-and-loop closed pocket. behind all of these is a full document sized panel, with a dummy-cord'ing loop. 

I filled out my pockets with a collection of little tools; my Spyderco Harp tool, one of my WTF multi-tools, a set of lock-picks, and several practice locks. I also have my APOC Geiger counter. Because I'm awesome.

The back of the pack shows off its attachment options. Four sets of webbing, attached to each of the four corners of the pack enable the wearer to lash it to the straps and body of a backpack. Fastex buckles provide quick attachment and removal of the Ventrapack, as well as ease of fitting.

Each of the four sets of webbing are terminated with a hook-and-loop strip, which enables you to both bundle loose webbing, but also attache the strap to other straps, without the need of an additional buckle. 

There are D-loops fitted to the top two straps, as well as the front Fastex clasp, all of which can be used for additional attachment. I found that my Portuguese sinnet paracord lanyard for my multitool, which I attach to both belt and tool with a small carabiner, perfect placement for this pack, making a very effective hip-bag for hands free courier-style. 

You could just as easily throw a shoulder strap through those D-loops and wear it as a messenger-bag.

 I really like the variety that this pack offers me, especially for times where I know I will be needing to carry a bunch of hand tools, but also needing my hands free. Roof crawlspaces, zombie-choked freeway, half-way up a power-pole, having your tools to hand and your movement unrestricted is a real boon, and this is certainly one way of ensuring it. 

The Invista® 1000D Cordura makes for a rugged and sturdy pack, which is good for both your tools and your body, and I especially liked that the bottom of the pack had a toughened strip, to further guard against abrasions. 
 
The fact that the back of the pack is lined with a breath-ability enhancing mesh, forming an additional document pouch as well as having bottom pockets to stow the straps when not in use, when the pack is attached by D-loops, or carabiners off a hip, or the like.

As you can see, it does have a big foot print when worn on the chest (although I'm a skinny fella), it doesn't restrict arm movement overly, and sits very securely. All in all I am very pleased with this additional to my technical loadout. Next time I have to fix something in a hard to reach area, this is coming out to play!

Review: Nuko Tool - ACDT (in GitD)

Following up from the sneak-peak:

When I saw that Norman of Nuko Tools was dallying in glow-in-the-dark materials, I was quick to drop him a line expressing my desires. Whilst the GitD platic is too fragile to be used to mill one of his signature Single NukoTool punchrings or the classic Nuko Heads which he has been milling out of G10.  (and you may remember I got the titanium version for my lovely partner Omega)

He thought it was a great idea too, and suggested he could sandwich a slab of GitD plastic between two titanium slabs of his 2nd Gen Atomic Cranial Divot Tool, which he did, and this beauty is the result.

Seen here looped through my belt-loop, with my paracord ID lanyard hitched.


The simplicity of this deign is evident, it almost passes as a piece of modern art.

Sandwiching these three layers makes the tool considerably thicker than its design originally intended, but this isn't really a drawback, except for those looking for a slimline pocket fob. I like my metal to make its presence known, and this certainly does.

Three hex-screw rivets lay flush with the front surface, and a keyring hole drilled through the piece gives the option of attaching a split ring.

The leading edge of the ACDT features a bottle (or perhaps threat) opening scallop, the flanking edges of which protect the soft GitD middle nicely, and are not so sharp as to catch or dig into clothes or the hand whilst wearing the ACDT.

When gripped through the finger hole, the curves fit the hand nicely, even with an index finger and middle finger ring on. This leaves the "bottle opener" corner as your leading edge, with the squared faces outwards and upwards. Essentially a pistol grip, with any keys or the like, trailing from the bottom of your palm. I found that when striking a target, the slot bit into my index finger a little, but as I'm not planning to make a habit of taking to the bags (or heads) regularly with it, that's no big deal. This is primarily a fob, with a -tertiary- impact tool application for me. That said, I put some nasty dings in a HDD, timber facing, and concrete wall!

I also tried a reversed grip, presenting a much more flat face, which covered more knuckle, but left me with less to grip, and put the bottle opener in my thumb/index webbing.

This wasn't quite as easy to grip, but offers the other advantages of more titanium (and glow) frontwards ..

I found that the extra-thick ACDT has been difficult to feed a split-ring through, and whilst I am still looking, I've so far been happy just to do a loop through the finger hole, the placement of the slot has been just fine for this.

Then there is the glow in the dark side of things. The running-board strip of GitD plastic catches light quite nicely, I have noticed my belt-looped ACDT picks up enough ambient light to be noticeable when I go into a darkened room, and quite positively flares up after exposure to the Australian daytime. For the purposes of this shot, I did hit it with my Jil Lite - JenyX UV torch .

I really love my UV and GitD items, as well as my titanium goodies, and even more so, my wearable impact tools ....

If you have a hankering for some cool pocket bling, be sure to check out NukoTools ...

Review: 5.11 Tactical Kilts

I love it when I get my wish-lusts fulfilled,  but I am so glad when its not just me, but the hordes of fans who get theirs too ... From what was originally a "April's Fools" joke, back in 2011,  with a VERY limited run (less than 100, if accounts are to be believed), the uproar from fans led CEO of 5.11 Tactical, Mr Tom Davin to take the cries to heart, and a full production run was initiated.

These are the 5.11 Tacical TDU Kilts  in Tan, OD, Black and Multicam and managed to secure in a pre-order, from 5.11 Tactical Australia.

I've really enjoyed adding more kilts to my collection over the last few years, along with my collection of UtiliKilts and my formal tartan kilt, as well as others, they are an important part of my identity.

The question is just how apt are they for a survival situation? It all comes down to the "form and function" ratio.  I'll go into that in a bit, first, here's what makes up the 5.11 TDU kilt.

 Firstly, they are made to mirror the TDU pants as closely as possible, with pocket placement, (including the cargo pockets) for "consistency of training". I have several sets of 5.11 pants, the Stryke and the TacLite Pro pants and I can say that I like the consistency, even between different designs and cuts. 

The TDU kilt is made of the same 65% Polyester, 35% Teflon treated ripstop cotton as the TacLite Pro pants, with four snap-closures on each side of the front panel. Double and triple stitching throughout ensures rugged and reliable wear.

Brass D-loops for sporran attachment are awesome, and I have worn my CAOS Admin pouch as one, for full Tacti-cool Effect.

Always a welcome addition to a kilt, the front slant pockets featured reinforced edges to protect against knife, pen or light clip abrasion.

The front belt loop includes additional badge holder loops, the loops themselves are wide enough to accommodate up to a 1 3/4" belt. Ive had no trouble with any of my belts; but tend to go with either the made-to-match 5.11 TDU belts, my shiny PM Leather hobble belts, or the always dependable 215 Gear Ultimate Rigger belt.

The side cargo pockets are also press-snapped on, and removable, and swappable, with hook-and-loop closures. Inside each pocket, are either two or three internal pockets, to fit two 30 round AR magazines or three pistol magazines, the pockets can be switched from one side to the other to fit your need.  A gap has been left in the lid-flap to accommodate feeling items through, in this case, I have used my Benchmade SOCP CQB dagger-trainer to demonstrate .


An internal press-snap gives an additional modesty protector, as well and ensuing you get more cover for your activities. There has been a long military history of the kilt, formally ending during WW2, and the recent revival in "tactical-wear" is only a reflection of that, however, I have worn mine in some pretty arduous conditions, and can attest that they offer considerable freedom of movement, are not all that cold in inclement weather, and cooling in hot weather.

I have climbed, run, crawled and jumped in mine, as well as wearing them to work on a regular basis. Much like my collection of "cargo pants" these offer me a means to carry my EDC, some rugged daily-wear and have some individuality to boot. Thanks Mr Davin!

Review: Platatac GBH-R hat

Since getting myself a tandem AquaYak, we've been getting out on the Bay a lot more, and I wanted to get myself some sun-protection for under my bump-helmet.

My dad had kept his US GI Boonie hat when he left Viet Nam, and I swiped it, but it seems as I've grown both up and out, and it's too tight to really be comfortable these days. I'm guessing his short-back-and-sides gave him a bit more room than my ponytail does, too.

I'd seen the Platatac GBH and GBH-R and thought it was time that I updated my cover. (1968 boonie on right, for scale and reference.)

I went in and after some back and forth to get the right fit, I settled on the GBH-R (which has a narrower brim).

This is a feature packed hat. Hats have features, you ask? Yes indeed. so, apart from the obvious; fit and cover, which the GBH-R provides with a circular stitched brim to add stiffness, it also features a sew-in cord chin-strap, with a traditional leather cord-lock (I remember teething on my dads). Inside, a mesh lining with hidden vents adds heat dissipation and wicking to keep hot heads cool.

I chose the pre-dirty looking ATACS-AU for mine, which is made of the windproof Nyco ripstop (the Multicam version is 100% Crye cotton ripstop). You can see it here up against my Multicam First Strike Snatch Bag  which shows off the subtle patterns of the ATACS-AU, this is my first piece of this particular camo scheme and it is "street capable", in that it doesn't particularly -look- like camouflage, in the way Multicam or Auscam DPCU does.

The GBH-R also features a hidden internal shock cord retention around the brim, with cord-k at the rear to adjust tightness. 

There are a very robust set of branch-loops around the side band, which are bartacked onto the hat, and these are both well spaces and generous enough to stuff a variety of items, be they local foliage, spares, or even lures.  I plan on rolling a coil of paracord around mine, following Stormdrane's fine examples. 

Lastly, the GBH-R features a 35mm x 35mm loop field on the crown for IFF patches and badges. I have a glow in the dark patch on mine currently, helping me find it in the dark of a tent overnight, or the bottom of a kit bag. 

I tend to wear mine "sides up" with the chin-strap acting as a retention loop. The hat has stretched to fit nicely, especially helped by some hot weather tree-cutting I did, getting good and sweaty, which also proved the quick cooling and drying properties of the Nyco ripstop. The other thing I like is that the whole hat is fabric, meaning it is both lightweight and crushable; when not being worn it can be mashed into a pocket, or into a pack, then pulled out, flipped open and it's ready to wear. 

Update: United Cutlery M48 Walking Axe

I have some bad news, rugged and prepared readers. I took my UC M48 Walking Axe camping with me last weekend, along with my M48 Ranger Hawk tomahawk  and my Fiskars log splitter.

We were cooking and heating by firewood for six adults and four under 10's. This meant a bunch of chopping and we were lucky enough that recent storms had necessitated the Rangers chainsaw a couple of trunks. The Fiskars splitter broke the logs up and we used the three axes to break them up into workable pieces and kindling.

The Walking Axe performed really well, light and fast, and soon out performed the Fiskars when it came to the lighter pieces.


When I got the Walking Axe home to do some maintenance I was dismayed to find that the main spar of the head had developed a serious crack. On one side the steel had even spalled.

It seems the chopping and splitting was too harsh for this design. It's possible that this particular piece had a flaw in its metal, but given the placement, it looked like design flaw to me.

I was really disappointed by this, mostly because of how well the axe had performed in both firewood chopping, but also branch-clearing.

There is still a fair amount of metal holding the head in place, so it is still functional, but how long till a spectacular failure occurs, I just don't know. I will not be staking my life on it, that's for sure.

Still, it did good work, and I was glad to have given it a thorough workout. It will still sit by the door in the umbrella stand / home defense artillery shell, ready to fend off fallen branches.

Review: MuzzleShots

I've been unwell recently, mostly I think, due to a bout of bad water I had when I went camping last weekend. If only I had unpacked and used my LifeStraw ... As a result I've been slow on the content here. Remember folks, bad water and associated disease account for an estimated 4.1% of the total DALY global burden of disease, and cause about 1.8 million human deaths annually. The World Health Organization estimates that 88% of that burden is attributable to unsafe water supply, sanitation and hygiene.


Which is why I thoroughly endorse  fermentation and distillation of alcohols for drinking and disinfection purposes! Contrary to popular uni-student-household myth, shot glasses are not indestructible,  so I asked myself, what was the most rugged way to drink my fortified beverages, and carry with me on my gear?

The grey, anodized aluminum MuzzleShot shot glass styled after the M16 A2 flash hider was the perfect addition to my collection of both shot glasses, AND tacti-cool kit. They are rugged, with smooth lines.

They even fit in my Platatac 40mm grenade pouches which gives me an extra tacticool-option for deploying them.

With a 44ml (1.5oz) capacity, these are bigger than the standard drink measure in Australia, but for recreational use, I don't think anyone will mind too much (drink responsibly). Flameproof
and slamproof we're talking serious drinking hardware here.

The anodizing is food-grade, but it is not recommended that these be run through a dishwasher.  I really like them, especially their design, texture and heft. This is a "glass" that will be with you a very long time!

If you need something bigger for your beverage, there is always the BattleMug ....

Click the picture to go to ThinkGeek's store

Wish Lust reminder: Ergonomic Shovel

Hey all, just a heads up, if you were thinking about pledging for one of Stephen's modular ergonomic shovels with the cool adjustable mini-gun grip, you've got only 12 hours to place a pledge on his Kickstarter.

Go here for more details. Stephen tells me that the Shovel will be 100% USA made, for all you Berry Compliance people out there.