Review: United Cutlery Trophy Master - Sidekick Tanto

I haven't covered any of my knives for a while, and thought this one would be a good addition. This is the United Cutlery "Trophy Master" Sidekick skinning knife, in "tanto". I don't have a link back to the manufacturer, as it seems United went Bankrupt in 2006 which is sad, as I've picked up a lot of their products over the years, my Lord of the Rings wall-hangers for one. Anyways, sad news at that is, I can still give you a review of this blade, and they are available through a variety of on-line sources it seems. So. What can I tell you about this knife? Firstly, it's made from corrosion resistant 420 J2 steel, which is both hard-wearing and low maintenance, but also holds a reasonable edge. It features an integral finger ring, a curling tail and a crenelated aggressive thumb grip.The polypropylene sheath is fitted with a belt clip and retains the blade with a pop-out mechanism which mates with the finger-loop on the blade. This is a little blade, being only 15.5 cm (6 1/8") long overall, but considering its purpose, that may not be a concern for you.
The Sidekick fits my hand very nicely, I have long fingers and I thought that might be an issue for a "naked" blade without scales, but the design lent itself very well to my grip. The "fingers through, thumb on the spine" technique for holding this knife enables some precision and control under circumstances that might otherwise be challenging with a "make a fist" grip. Whilst being designed as a skinning-knife, this version's "tanto" point is somewhat at odds with that, however, it has suited my needs very nicely, as a slicing and penetrating blade.

 The overall cross-section is quite stocky, which does interfere with thin-slices, but offers a very sturdy and stiff cutting edge on the other hand. The false edge of the spine meets the tip very neatly, and allows for a very sharp point to be achieved. Similarly, the straight edge of both the "tanto" tip and the main edge of the knife make for easy sharpening, but i have found that the thickness of the blade overall does not lend itself to keeping a finely honed edge.

That said, this is a dependable blade, that doesn't slip from your fingers when they are covered in goo and gore, is small enough to be manageable in confined quarters and has a beautiful aesthetic to it. It's a solid little knife, and whilst it isn't my first "go-to" blade, it does sit on my bedside table, just in case.

Review: Nukotool TiGBi Skull keyring

I take my accessorizing very seriously, and like to think that I do so in my gift-giving too. Whilst reading my RSS feed, I came across a review by Matt of JTT and saw these little guys, and when I did, I was taken aback, and knew that they would make someone very happy (and potentially, someone else very unhappy). Being in a wonderful committed relationship with someone(s) who understand my predilections is a tremendous thing, especially when it comes to romantic gift-giving. That and a clear policy on threat-countering appropriate levels of force. That's where this cheery Jack Skellington looking fellow comes in. It really spoke to my Gothic background, and being machined from a slab of titanium didn't hurt either. This is the Nukotool TiGBi and it's pretty.

Canadian tool-smith Norman Lee produces these (and a variety of other prototype and production pieces in Ti and G10) in his garage workshop, and keeps a blog of his toolings. I was so taken by it, that I happened to lean over one eve and point it out to my partner Omega, who's eyes lit up and was giggling as maniacally as I was. I filed that response away, and placed an order. These keychain impact-tools are cut and tumble finished from titanium , and have the option of a heat-treatment bluing, but I opted for natural, as omega is more of a red, than blue, gal. The cuts around the outer surface of the disk, and finger-holes are smooth and feel very nice in the hand. The lanyard/split-ring/bead-chain hole is nicely placed to attach this tool to make a very effective key-fob. Being titanium the weight is very manageable. The teeth notches are a little jagged and slightly irregular, which adds to their charm, without affecting the sleek outer finish overly.All the cuts are angles "inwards" to give a plug-like effect that is visible, but not overly noticeable in-hand.


When this one arrived this week , I was overjoyed that it had made it though customs, and I could give it as a birthday present (almost) on time! As you can see, it fits the hand very nicely, and the eye/finger holes means you never need to worry about losing your grip on your keys in the event you are startled by an aggressive space-alien, Mad Max marauder or creepy sparkling vampire stalker. The idea you could "leave an impression" of that gleaming titanium smile with your surprise visitor, allowing you to strike them senseless with your keen Gothic aesthetic appreciation of both skulls and space-age materials, whilst not interfering with your nails, jewellery or knuckles appealed to me.

Be sure of the legality of such an item in your area before carrying and utilizing in moments of surprise!  Otherwise, what a lovely and cute skull-face keychain fob!

Review: Sardine Can survival kit

Here's a quick one today. Going through my over-stuffed Messenger bag, I realised that I had a few items in there that I hadn't reviewed yet. This is one of them. This is the Sardine Can Survival Kit that was a gift from a friend several years ago, and has lived in the outer pouch of my bag since. This light little can is just the kind of thing that I like having around, and knowing it's been there has given me a sense of confidence, even when I've never needed it. As you can see, it's put up with a lot of abuse, and has kept on keeping on. 

Contained within its waterproof and airtight seal is a variety of items useful in a single container which also happens to light enough to float! I haven't broken mine open to check the contents, obviously that's a one-time only exercise, but here is a list of what is included: non-aspirin pain reliever, adhesive bandage, alcohol prep pad, antibiotic ointment, book of matches, compass, chewing gum, sugar, salt, energy nugget, duct tape, fire starter cube, first aid instructions, fish hook & line, note paper, pencil, razor blade, safety pin, reflective signal surface, tea bag, waterproof bag, whistle, and wire clip.

This is a nice little kit and it has remained as part of my EDC thus far without any incident. In fact, I am pretty sure I traveled to New Zealand with it in my bag, without incident. I know I have removed it before, so as not to be hassled by Airport Security as counter intuitive as leaving your survival kit at home when taking an overseas and over-mountain flight ... but that's the crazy world we live in.

Review: Jackeroo Shirt

My recent foray into Tough Mudder gave me a reason to break out my safari shirt: Our Team, the Funk-A-Mentals had a 70's theme, and my best offering to this was this khaki safari-shirt, by Jackeroo, the same people who brought you the Hooded Vest I reviewed previouslyy. This was also a Giftmas present, same year, same batch. Made from a fast-drying nylon outer and polyester liner as the vest, and hardy stitching throughout, this is a durable shirt, that just happens to look like it fell out of Jurassic Park. I don't mind that at all, and happily wore it to work on a number of occasions.

One of the great features was the pectoral pockets which fasten with hook-and-loop and have an internal pocket on the left side as well. This was sufficiently well closed to withstand the Tough Mudder mud, water and crawling around, and not loose my spare Contour GPS battery. It also features a extendable fold-up collar, for those times when getting a sunburnt neck doesn't appeal. Another interesting and well placed feature is the mesh lining around the shoulders, and vents under the arms. I found that in an urban setting, the material actually made me a bit sweaty, whilst out and about in the wind this wasn't nearly as much of a problem. Somewhere along the line the shirt picked up a weird blue stippled stain over one shoulder, which reduced its work-wear potential, and I popped a button adventuring. These things made it an ideal piece of clothing to put through Tough Mudder. I can tell you, that is a pretty harsh test for clothing's durability.

I saw a lot of discarded gloves, shirts, socks and trail-packs. I wasn't planning to discard anything, though at several points as I was caked in an inch of mud over my entire body I did feel like shedding layers just to drop that mass. However, the material of this shirt sloughed off the mud fairly easily, didn't get snagged or hooked up on any of the obstacles, be it the Berlin Walls, trench crawls or cargo nets, and once I got to running, dried speedily and broke the heavy headwind nicely. The sleeves were cut such that I could do all the crawling, climbing and scrambling I needed to without hindrance.

As you can see, it got fairly cruddy, but after a couple of washes, it was as good as new. Or at least, as good as "before Tough Mudder". If K-Mart still stocks these, I'd be strongly considering picking a couple more up, in long-sleeve, to add to my adventure-wear.

Review: EDC

 

 So, this is what lives in my Crumpler messenger bag, which I carry with me everywhere I go. I've had some discussion with my partner Omega, that perhaps I carry either too much stuff, duplicates, or items that could be replaced with lighter kit. I really value both her support and helpful opinions. She was dead on, my bag is weighty. 

So, here is a recap of what I carry;

Crumpler Thirsty Al pouch  filled with paracord, on the outside strap.

Platatac FUP pouch carrying my 1L SIGG bottle

inside the bag I carry:

Wire saw 

Gerber bear Grylls "Basic" Survival kit 

First-Aid kit 

Sea-to-Summit Alpha cutlery set 

Lazerbrite in red and white 

DMT sharpening-stones 

credit-card tool 

Platatac CSI-folder 

Electrical tape

Toothbrush and Toothpaste

Sewing kit

Razor 

Cord

Cable Ties

Pad (great for injuries)

Spare glasses in case with HDD magnet

Waterproof pouch with q-tips

microfiber towel

specimen jar with hand-wash

collapsible cup

Compass

Swedish FireSteel

Poncho

Set of Allan keys

Tape measure

my lunch and an apple.

On top of that, I also pack my kendo gear, and a variety of other things, depending on the day, but this is my EDC.

Review: Contour GPS

So some of us may think that we have our priorities straight when it comes to disaster preparedness and response, we have our EDC squared away, bug-out-bags filled and stowed, pantries stacked and indexed but here's the thing. When people (and by people I mean the people I see doing this online, on the news and myself...) see something heavy going down, they often whip out a camera, take some snaps, maybe film some to go up on YouTube and then deal with the situation however they may. There are those who go out of their way to see exciting thing up close and personal, and when they do, sometimes having your hands free to deal with the situation is more important than getting it fully in frame with the right aperture settings.

For those people (myself now included) there are the helmet-cams! These little, robust cameras are designed to be strapped to ones person, their kit, or whatever, and give you an "I was there view " of the action they put themselves in the way of. Here is my review of the one I recently purchased and put through its paces. This is the Contour GPS. This little nugget of technology houses a 135o lens, and will capture video at 720p at 60 frames per second or 1080p at 30 frames per second. It will also take continuous stills and has some smarts to auto-adjust for lighting conditions. It features built in GPS and has a Bluetooth option. The Bluetooth option allows you to configure the cameras settings, and check the alignment with your iThingy acting as a viewfinder.

An omnidirectional mic allows the sounds of the action to be recorded too, and its gain is also adjustable to cut out high-speed wind noise. The body of the camera is a well machined aluminium tube, which houses all the electronics, the GPS antenna and the Bluetooth card slot. The lens is centrally located and is built into a 180o rotatable swivel, to allow you to mount the camera and adjust the angle of its capture. Twin built in laser-sights allows you to level the picture as there is no view-finder, or any display options internally. The removable battery is USB rechargeable, and the micro-SD slot takes up to a 32Gb card. There is a toggle switch to move between pre-set setting options.

The case is marketed as water-resistant but it is NOT sealed, the end cap is plastic, which slides and locks into place but it by no means watertight, or even dust-proof. That's not to say it doesn't fare any worse than other camera battery-covers, but not what i'd hoped for in an otherwise rugged camera. So, i also bought the waterproof case. which is rated for dives up to 60m deep. It latches down at the front, and has a magnetic induction slide-switch to operate the camera (only works to turn it ON, with mine though however ... very disappointing bug). The back-cap is the Achilles-heel of this device.



Both the waterproof case and the main camera share a rail-attachment system, that allows for a number of kinds of mounts to be fitted. The camera comes with an adjustable goggle-strap mount, and two adhesive "flat-surface" mounts. that slide and lock into place along either side of the camera. I've mounted this to the side of my kendo men helmet, to the shoulder of my Platatac Bravo hydration pack and so far have managed to only get a few "straight" shots. Learning is part of the fun. What ISN'T fun, is the difficulty I've had getting the camera to actually film when I want it to. There are four sets of indicator LED's on the main body; a battery indicator, a memory indicator, a "status" indicator and one for "recording". Between these, and the press-button power button, and "slide-to-record" switch, you'd think someone tech-savy would have a breeze getting it going. Not so much. The combination of "press-and-hold" and "secret extra un-labled button" make for a clumsy system that requires getting used to before you capture that big exciting event. Like several hours of laser-tag, (which I missed the exciting parts of) or some good kendo footage (also didn't record when i thought it was...)

I did however get several hours worth of Tough Mudder footage, which although askew by about 30o due to how I mounted the camera, and required a battery change "in the field" to get a total of 5 hours of the 5 1/2 hours I was doing the challenge, and am really impressed with how both the camera and waterproof case held up.

So, clumsy user-controls, and non-water proof body aside, this is a fun toy, and I plan to film a lot of things with it.

Review: Platatac Bravo Hydration

With the upcoming Tough Mudder Australia event this weekend, I wanted to show you one piece of kit that I've been using, both for preparation for this, but also on my Stargate Lasertag LRP events, as well as a good solid piece of outdoor and adventure kit. This is the Platatac Bravo Hydration System, which is coupled with a Source WXP 3L Bladder. This was an item that I managed to put on my wish-list, and was lucky enough to receive. I've always been fond of keeping fluids on me, mostly with my combination of my SIGG bottle, which I've reported on, and carry in a FUP pouch everywhere I go. However, sometimes it's more practical to sling all of that onto a backpack, rather than hanging off a belt, especially if you're going to be away from reliable water for a while, or know you'll be doing some hot hard work. That's where a bladder reservoir comes in so handy, especially if they are well made, and carried. That's where the Bravo comes in.


As with all the Platatac range, it's made from the 1000d Cordura, and features a 4 channel, 6 row battery of PALS/MOLLE attachment points on the back, as well as 3 nylon D-clips on the sides of each ventral edge. These are great for either attaching the pack to another piece of gear, like a pack or plate-carrier, or to sling shock-cord through to attach items to the Bravo itself, like a poncho, or the like. The Bravo also comes equipped with a reinforced drag-handle, with hook-and-loop for nameplates or the like and also a hanging loop, which I've found very useful. As you can see from the side-profile, the pack itself expands quite a lot, and there is in fact room for an entire second hydration bladder, should you so desire, (remembering that 1L water = 1kg!) but it also means that there is room within the pack for other things (be sure not to pack anything pokey though!). You could also use the D-clips to use shock cord to compress the pack, keeping the load snug and secure, and adding some water-pressure, but I haven't had any concerns with this.


 The "front" of the pack looks like front side of most backpacks, with a couple of exceptions. As well as the usual Fastex clips and webbing loops, a couple of D-Clips and a sternum-strap for stability (which also includes a signalling whistle in the clip, nice one Platatac!). The backing of the Bravo is a moisture wicking-mesh, and features a drainage grommet. The zipper for access to the insides of the pack is on the "inside" and can be seen as the big curved arc at the top of the pack here. There are ports for the hydration tube at either shoulder, and large squares of hook-and-loop towards the top the shoulder-strap gives you more control over the placement and movement of the tube. The wide mouthed screw opening of the bladder fits snugly into the dorsal side of the pack, and is totally removable.

The Source bladder that came with the Bravo is all kinds of awesome as well, featuring their TASTE-FREE™/BACTERIA-FREE™/CARE-FREE™ Grunge-Guard™ System which basically equates to a easy to clean, easy to maintain, and nice to use bladder and drinking tube (which is in itself covered in a woven tube, for protection, UV resistance and insulation). The mouthpiece is angled 90o which means it is easier to use, with less cod needed to get it into your mouth, and features a really good drinking valve. Both the mouthpiece and tube detach from the bladder for ease of cleaning, with spill-free valves built in, and the bladder itself has both a wide mouthed screw opening and a fold-and-slide closure too. I had some misfortune with my first bladder, after not reading the care-manual, I rinsed it out with hot-hot water, which somewhat melted and warped the bag. DON'T DO THIS!

I'm really pleased with the Bravo, and the Source bladder Platatac paired it with. Its been out adventuring with me a couple of times, and will be getting a serious workout this Saturday at Tough Mudder. Wish me, and my gear, good luck!


[EDIT]

I survived the Tough Mudder, as did my Bravo! I really appreciated having a source (har har) of hydration along the way, and it also gave me a good platform to run my Contour GPS off (although running makes the footage a bit jiggy).

The pack stayed snug to me as I ran, crawled, slid, swam, climbed and trudged my way through the course, was barely noticeable as far as wear and rubbing is concerned and the tube system was really convenient. The mud-cap worked really well, and hardly any muck got on the mouthpiece, even when I was caked with almost an inch of it to my whole front. I saw a lot of discarded hydration systems, mostly cheep looking ones, Camelback being the only name I recognized, but there was no way I was going to discard mine! One thing I noticed, the wide-mouth screw-cap leaked a bit. Should it have an o-ring in it? Maybe Platatac can let me know if I've lost mine, or just didn't screw iit down tight enough.