Review: Fishbones - Gravity Hook

I've been lucky enough to snag a couple of prototypes for a Kickstarter project that has just a few days to go, and I really wanted to get the message out to you all, so you can take advantage of the situation, and back this awesome project. This comes from the same folks that brought us the Fishbones and Piranha gear ties.

This is a tool, called the Gravity Hook, which  can be used just as a 2 pronged hook, as a grappling hook with the addition of a cross-hook or, in its primary format, as a grabbing hook.

It is designed to "bite" objects that might slip out of a grapnel, much like The Claw, from a claw game.

A complete assembly is made up of includes 3 linking bars, 3 "hammer" arms, a cross hook, and nut-and-bolt hardware. A bow-shackle at the end gives you a cord-attachment option.

The whole assembly weighs around 360g in its stainless steel configuration, and a mere 60g in the high-performance Derlin plastic.

Notches cut into the linking bars as channels allow you to affix o-rings, which really help when tightening hardware. They are used to help keep the jaws tightened around the cross-hook whilst set up in the grappling hook configuration, and also during modification by keeping the parts lined up, to let you thread the bolts more easily. I've covered a small grappling hook before but this blows that right out of the water.


Bear in mind that the two version I have are prototypes, and by following along with the Kickstarter campaign there have been several improvements thus far. Notches in the jaws where the cross-hook sit should eliminate the slight wobble that the base of the cross-hook gets when in the grappling hook configuration. This was more noticeable in the Derlin prototype, but from the 3D renders I've seen this will be completely eliminated in the production model. The Derlin model also has a double set of o-ring channels, one high, one low.

I tried the low set as a place to store the o-ring I was using, but found that the added tension reduced the bite that the hook had, and combined with the low weight of the Derlin version, I found more success with the o-ring slipped off the hook entirely. The other difference in the two models are a couple of extra sets of holes in the Derlin version, presumably for threading extra bolts through to "lock" the grappling hook in place.

Two designs of cross-hook are seen as well, the solid version in stainless steel retains the weight and all the strength possible, but the cut-away version more closely matches the hammer-arms of the main body, as well as acting as a gear-tie, following n the footsteps of the Fishbone and Piranha.

Compact enough to be stowed on a back pack strap, I also found that the pair of Gravity hooks, along with their cross-hooks, and a length of paracord fit nicely in a Platatac FUP pouch. I carried both around in my cargo-pants for a few days, trying them out on various things to grab and hook, and  found that I needed to be careful which side the shackle bolt was sitting but the rest was easy to carry comfortably.

Here's a safety note: the Gravity Hook was specifically designed for retrieving kit and grabbing things. It has not been tested or certified to bare human weight. The guys who designed them have done some car-towing and some anecdotal destructive testing but stress to never use it in a situation where it's failure or dislodging might cause bodily harm or property damage. As with any climbing or salvage work, always use good judgment. You are responsible for your own actions and decisions. In an emergency, you might need to take extraordinary measures, but the risks are also extraordinary. Failure to follow these warnings could result in property damage, severe injury or death. Be prepared for anything, don;t become a casualty.

So, all that in mind, I really like the Gravity Hook. It's going to be a part of my EDC from now on (because I like to roll as heavy as I can get away with). Having this kind of gadget is exactly the kind of thing that I get to be a hero for carrying, at some stage, always. The Derlain version means I even have an airport safe version to take with me on any abrupt mountain-side landing trips I might be on.

Get in quick, back them on Kickstarter and remember: Always prepare to be a better version of yourself. Unless you can be Batman, then be Batman.

Sneak Peek: Fishbones - Gravity Hook

The guys who brought us the Fishbones and Piranha gear ties now have these awesome Gravity hooks in progress on Kickstarter. Part Mechanical Claw, part Grappling Hook and sent me sent me these two prototypes, one in steel, the other Derlin ... all awesome. Check out all the details on Kickstarter for now, review to follow here too!

Tactical Baby: "Those are Batman's..."

Omega: "No darling, they're Daddy's.."

Tactical Baby: nods grimly...

Go back them ... be Batman!

Review: Shelham - 3099 Clasp knife

Way back in 1995 or so, for Giftmas, my gf's brother-in-law (who worked for the DSTO in some capacity) gifted me, and my gf's other bf a set of these clasp knives. For 20 years this has lived in my pockets, packs and car-glove boxes.

I did some research recently, to try to work out just exactly where they come from, as I've had different people tell me different things over the years. I have a good friend who was an engineer in the Army Reserve, who called it a "sapper knife".

[edit: a different friend, with 2 years as active an ADF Engineer told me on the weekend he's never heard them called "sappers knives" and only ever referred to them as "clasp knives". Primary Source FTW]

My knife is marked SHELHAM 3099 AUSTRALIA and  STAINLESS STEEL MADE IN JAPAN. Other versions I've seen online are marked with the knife's NSN of 5110-66-013-1930. Since the 1980's, Shelham (Sheldon & Hammond) have supplied the Australian Military Forces with this 3 blade stainless steel clasp knife.

The broad blade with its sheepfoot pattern, with a long flat edge that I've always been able to keep very sharp is paired with a hefty and deep biting can-opener / bottle opener. No can of beans, paint or Nuka Cola is safe.
The back plays host to the large marlin spike, perfect for working rope and knots, as well as punching holes in things, and acting as a leaver. Generally excellent as a rope and cable worker, I've abused this spike with other chores, and it has survived admirably.

Some surface pitting and a slight bend to the tip of the spike is the only evidence of its hard life. The shackle at the end has kept it dummy-corded to pants for longer than I care to remember, and the only other significant wear and tear evident is some slight bending to the shackle and some dents to the screw-driver end that sits between the blade and can-opener.

This is an exceptionally simple, hardy and useful tool, especially for anyone who deals with rope and cord on a regular basis.

Review: Hummingbird - Mega hammock

Summer has arrived here in Melbourne ( don't let the rain and storms fool you) and I have broken the hammocks out, because in the afternoon and evenings, our house retains the heat and radiates like an oven.

I've covered hammocks before, with the Eagles Nest single hiking hammock, but I found an excellent Kickstarter for a mega hammock, to suit my burgeoning family needs. The good folks at Hummingbird Hammocks pitched a "Mega Hammock" and successfully funded.

The mega hammock is designed to hold three to five people, and is rated to carry 450kg (1000lbs). I like to sling it in my back yard, and have taken it camping (although we didn't find a good place to set it up, so haven't had the pleasure of sleeping in it, in the wild).  It measures 5.5m x 2.4m (18' x 8) and spreads out nicely.

Three distinct panels are sewn together to form the body of the hammock, and Hummingbird are proud to say that they use construction techniques borrowed from the Parachute Industry Association, and materials that are likewise parachute grade.

Their mega hammock is made out of 1.9oz polyurethane coated ripstop nylon, which is incredibly strong (rated at about 100lbs per square inch.) The edges of the hammock have type 17 nylon webbing sewn in and used for the attachment points to the four corners. This webbing is rated for 1100kg (2500lbs), will not stretch, and is low bulk. The fabric has a lot of give, and the edge seams and the three panel seams are sewn such that you get uniform "give" throughout.

All the stitching is done on an industrial sewing machine using size 69 bonded nylon thread, which along with everything else used to make the hammocks is very strong and is the very same thread used on parachutes.

They offer several different colours, but I jumped at the coyote-brown option, whcih also goes some way to cover up any goopy-hands stains that my minions may present.

In additiontothe webbing loops in the corners, Hummingbird supply soft link attachments instead of traditional carabiners. These are apparently used widely in skydiving today as a means of connecting the parachute lines to the jumper. They contain no hard parts, are stronger than a carabiner of similar size, weigh next to nothing, and are impossible to cross load.

A simple length of high strength cord, with a loop at either end, one end having a tab of webbing sewn in.  You loop it through itself twice, and you have a light, secure and bomb-proof anchor connector. I have lengths of 2" webbing that I use as my attachment to the steel beams, concrete pillars and roofing beams that I sling mine off. I figure the 5500lbs breaking load the webbing means I don't have to worry where I sling this. Perfect for the rafters of an abandoned warehouse, or between Ewok trees.

The hammock comes with its own stuff-sack, and packs down into a small-pillow or sleeping bag sized bundle. It was quite an investment, but thus far, if nothing but the joy of my littles ones is a measure, it's been fully worth it. Having a portable, hardy betting option is nothing to be sniffed at either, and there are many situations where I would want to bunk-down well off ground level.

Especially if I need to watch out for stobor.

The Hummingbird Mega hammock certainly is big, and quite comfortable with a number of people in it. Be sure to sling it high enough to be off the ground when loaded up, but not so high as to be impossible to get in or out comfortably.

Review: Tiletto - The Titanium Letter Opener

I'm a firm believer in not only getting behind small business makers, but also adding more shinies to my collection. This was no exception.

This is the Tiletto and is the creation of Steve Sure, who along with his trusty collaborators in the form of Mike Bond (of Ti2 Sentinel and Parabiner fame), Brad (of TiPik, WTF and TKMB pen  Tactical Keychains) and Philip Kaufman (of the ScrewGrabber project) designed a piece I knew right away that, with those peers,  would be a great project to get behind.

Pay no mind to the CQB dagger beside it. It's a complete coincidence that their forms are remotely similar.


Milled from sheets of Ti-6Al-4V, otherwise known as "Grade 5"titanium, these pieces are approximately 178 mm (7") long, 25mm (1") at its widest, and 1.6mm (1/16") thick.

The Tiletto features chamfered sides that can act as straight edges for assisting in lines drawing or scoring, to cleanly tear pieces of paper, and to open letters, packages and parcels. I've not encountered a taped box the Tiletto can't safely get into in our regular deliveries.

Either end of the Tiletto,  has different shapes / characteristics to use as a flad-head driver, or an improvised phillips head, and can also be used as a pry bar to take on small jobs such as car and can opening.

Further adding to its functionality, the Tiletto features a set of wrench openings in its belly, with the inch-calibrated version offering: 9/16", 1/2", 7/16", 5/16", and a 1/4 inch hex-bit driver in the center.

The millimeter-calibrated version offers: 13mm, 12mm, 10mm, 8mm, and a 1/4 inch hex-bit driver in the center. I got one of each, adding to Omega's keychain collection as well


I've found quiet utility in having this too sitting in the PALS/MOLLE webbing of my  Hazard4 LaunchPad iPad sleeve.

Following Steve's suggestion, I've even used it as  a fid on larger-diameter poly-rope, and have stirred my tea with it. It is an elegant piece, slimline and innocuous for  what it offers. As with many of my pieces, it is multifunctional and hardy. Although, best to be aware that whilst it is half as dense, and offers twice the tensile strength of 316 stainless steel, it isn't a miracle metal like adamantium. 

Still, its a gorgeous tool that I am glad to have added to my collection and hope to give it a lot of use as the days roll on.

Review: Ti2 - PB9 parabiner pulley

I seem to be fully addicted to both Kickstarter, and awesome titanium pieces. Fortunately, this means I not only have a bunch of cool kit to play with on a semi-regular basis, as well as helping people get their ideas off the ground and into your hands, but also I have things to write about.

This is one such item, which I've been sitting on for a little while,This is another creation of Mike Bond, creator of the Sentinel s4s cache, the Sentinel X and the EDCPen (link coming VERY soon). This is the PB-9 Para-biner

The PB-9 measures 48mm x 111mm x 9.5mm thick (1.875" x 4.375" x 3/8") and weighs 100g (3.5 oz) and almost the whole thing is made from grade 5 titanium. This is the biggest of three variants, and features 9 tool options, being a very versatile tool.

There are two versions of the PB-9, in Imperial (SAE) and Metric, each offering a range of wrench openings:
SAE: 15/16", 3/4" 9/16", (5/8"), 1/2", 7/16", 3/8", 5/16", 1/4" (bit driver) MM: 24mm, 19mm, (16mm), 14mm, 13mm, 12mm, 10mm, 8mm, 1/4". I bracket out the 5/8" and 16mm wrench options because they sit in where the pulley pin and wheel reside, and I don't thing they are really accessible. the pins, split rings fastening them, the pulleys and whole assembly would need to be removed to have this option used. However, the pulley significantly outweighs the wrench need, in my eyes. Both feature a "hidden" 1/4" bit driver, inside the locking gate.

That gate is 12.7mm (1/2") or so wide, and features a hook-and-pin overlock, giving a really secure structural gate. Instead of a regular spring, the PB-9 features a torsion spring, cut from a piece of grade 5 titanium as well, as rustproof as the rest of the piece. Outstanding.

The PB-9 has two pulley options, both made from high strength bearing grade bronze 544 (The prototype pin was stainless steel, the production version is also titanium)

The single pulley option allows for lines up to 1/2" diameter, whilst the twin pulley was specifically for use with paracord. I found that it would take paracord, 3mm plastic coated clothes line, 6mm nylon sheath cord, and even the plastic coated braided steel cable from a laptop lock.


 Using two PB-9s with twin pulleys in a "double tackle" setup allows for a 4 to 1 mechanical advantage when lifting loads.
The tool also features a wedge shaped "Para-Cinch" notch for quick lashing of paracord (or as a bottle opener)

The non-pulley end also features a flathead screw-driver, whch could easily be used as a short pry-par, Mike even suggests as a box-opener. This tool has it all!




One of the things I loved about this Kickstarter was the engineering that went into it, and how that was shared. Watching the test-to-destruction clips of all three Parabiners was amazing. The fact that the prototype PB-9's broke at 1771kg (3,905lbs) is amazing. That's around the weight of a car! Having these tests, and subsequent improvements described along the way was a real eye-opener, and very heart warming.

Seeing the hooked gate go into the design, as well as the living/torsion spring enter the process really gave me a sense of being part of the experience, and has lead to an outstanding tool.All part of the Kickstarter joy.

If I had a gripe about them, it might be that the gate only opens 1/2" or so, which limits what I could clip them to directly. I certainly made do with braided steel cable, and could have used chain, just something I noted.

These are totally going into my bug-out kit, and I look forwards to being the guy with the pulley when it comes time to lift an obstacle.

Review: Loop Alien cord attachment devices

I just can't get enough of these shiny titanium cord-attachment devices.
I've already shown you the Piranha and Fishbone, both by Fishbones which are both awesome, and I have them on my person almost every day.

Whilst they were underway on Kickstarter, another kind of device came up, and I jumped on that as well. I have neglected to cover them until now, but have been spurred on by progress (and another Kickstarter by the same folks. From Canny Designs, comes the Loop Alien Original (small) and Loop Alien Ultra Fast Attatchment (large)

The original Loop Alien (small) is only 33mm x 22mm x 3mm (1.25" x 0.9" x 0.125") in size, I was surprised at just how small they were, but there is a lot of grunt in a little package. Made of Grade 5 titanium, these weigh only 4g. Canny Designs offer these in 6061-T6 aluminium (2.6g) , and 316L stainless steel. Three different metals to suit your different needs and budgets.

The smallest hole of the two "eyestalks" will -just- take paracord, if the end is finished to a point, but bear in mind the stresses this tight fit will put on the cord. Canny Designs recommends 1.75mm Dyneema (400lbs test) cord. Great stuff.

The NEW large LoopAlien UFA is 49mm x 32mm x 5.2mm (1.93" x 1.26" x 0.1875") in size and weighs 16g. It is about 1.5x larger in length and width and twice as thick as the small version. It's paracord friendly too!


The main difference in the UFA versions are the hole cut in the "body" of the device. This means that cord need not be threaded through the hole in the "body" as in the originals, but can rather be slipped through the gap, and over either of the "eyestalk".

Here is one of the UFA's, with paracord lashed through its large eyestalk, and looped through the body as a tensioned slider. Through the little eye, I had fed one of the lengths of 7/64 (2.5mm) silver Amsteel rope through the small eye, giving you an indication of the dynamics you can achieve with these little guys.

There are lots of ways you can fit the cords, either with knots, or self-knitting, in the same styles as those seen on the Fishbones. These however, lend themselves to doing guy-wire securing, and adjustable tensioning of loads of up to 45kg (100lbs).
Here's the small Original, also lashed with paracord, the slant of the eyestalks snags the cord nicely, securing the loop neatly, and with enough room to allow it to slide without rubbing on the opposing line.

I have not used the small Originals as much as I might have liked, not being fully paracord friendly limited my imagination a little, but I have been thinking of using them with shock-cord, to rig things to my kayak.

The larger ones the newer UFA's, which I got through Kickstarter as "super fast early delivery" are likely to go in my car with a spool of paracord, for emergency lashing options

These are very cool pieces of kit, and well worth a look in, especially if you are looking to replace your existing tensioning devices for camping or rigging.

I have been wondering if I could set up shade cloth over the whole of my backyard, (which is concreted over, and radiated heat like no ones business) to help with this summers heatwave.

These might just do the trick in adjusting the sails, to stand up to the hot winds.

Check these out, they are elegant and beautifully designed, as well as being very for for purpose.

Here's just a comparison with the two kinds of Loop Alien, and the two kinds of Fishbones

Lastly, to reiterate the manufacturers warnings:

*** The LoopAlien(TM) and LoopAlien UFA are not designed to support human weight. They must not be used as life saving devices, fall protection or in any manner where failure could cause property damage, injury or loss of life. ***

Posted with Blogsy

Review: Eagles Nest Outfitters - DoubleNest hammock

 Summertime brings hot winds and hot houses here in Melbourne, and having some options to escape the heat are always welcome.

Several years ago, in the lead up to a camping expedition, my partner Anstia gave me a hammock, which I have subsequently set up in my back yard for when the weather is good.

I've enjoyed hammocks whenever I've had the chance to make use of one, but until now, had never owned a production one myself.

This particular model is the charmingly named Double Nest by Eagles Nest Outfitters.

Made of a breathable, quick drying nylon and constructed with heavy duty triple stitched seams, this is a sturdy piece, even for all its light weight material.


This model has a carrying capacity of 180kg (400lbs) and is designed to accommodate two people.

When set up, it measures 2.85m x 1.85m (9' 4" x 6' 2") which gives plenty of space to stretch out, even for a long body like me, and the width has made it possible for me to swing happily, even with one or two of the offspring in with me. I can well imagine being able to squeeze another adult sized person in with me, or if I were fully kitted out, give myself a place to get some rest.

When folded up, the hammock stows in its own sewn-in stuff sack, with a built-in compression strap,
and packs down to a 10cm diameter, 12 cm high bundle (4" x 5")and weighs only 565g (20 oz). This is small enough that it can sit in almost any bag, and even a few larger pouches (like the Tactical Tailor Joey hydration pouch) with ease.

The hammock comes with sturdy rope loops at each end, and a carabiner attached on to those. Eagles Nest Outfitters offers a range of lashing straps, and attachment kits, but I simply use regular poly rope.

At home I have it secured it to my verandah's steel superstructure, mounted very low so Tactical baby and Triceratops Girl can clamber into it unassisted. Out in the field, I would use reclaimed seat-belt webbing (as it would give good surface connection to trees, rocks and the like, without the rough treatment rope might give tree bark). You can see here that being a double sized hammock, there was plenty of material to wrap myself with, when in it myself.

The trick is to be sure that the attachment method is safe and secure, and fit to bear the load you are intending to suspend. Given a second line, and a poncho, it would be possible to easily make a rain shelter, as well as a bug-screen, with some mesh, which would also ball up into a tiny space. Perfect for catching some rack time, especially in inclement conditions, post disaster when regular accommodation becomes unavailable.

I've often though that being able to sleep safe, dry and secure is a luxury that everyone should work towards, and if you are able to do so, sleeping up off the ground is always my preference.

Review: Fishbones - Fishbone gear ties

Having covered the most excellent Piranha (which was their v2 product, but I got those first), I wanted to give the little sibling a trial before showing them to you, to get a better feel for their utility and differences.

These are the Fishbone gear ties (v1). You can see from the picture here that there are in fact three metals offered 1) 6061 T-6 Aluminum 2) 304 Stainless Steel and 3) Titanium. The aluminium and steel versions share the same exact geometry, where as the titanium is a little more "rounded".

The guys from Fisbones were good enough to send me a few of each to play with, but I've mostly focused on the steel ones. Why three options? well, in their own words:

Aluminum:

• Resists corrosion
• High strength to weight ratio
• Can be anodized in different colors
• Non-magnetic
• Nonsparking
• Light weight

Stainless steel:

• Resists corrosion
• Bright appearance
• Normally non-magnetic
• Great fatigue and impact resistance
• Durable

Titanium:

• High strength to weight ratio
• More than twice as strong as aluminum
• Almost half as light a steel
• Non-magnetic
• Excellent corrosion resistance

Measuring in at 14mm by50mm (½" x 2") and 3mm (1/8") thick, the Fishbones are smaller and thinner than their bigger siblings, weighing in at 3g  for aluminium and 9g for steel. When subjected to strain testing (by the makers), the aluminium slightly deforms at 36kg (80lbs) and has major bending at 72kg (160lbs) Note: projected total failure is only (135lbs). The stainless steel Fishbone only took a slight bend at 72kg (160lbs) in initial prototyping. Subsequesnt  That's a fairly impressive static load for a gear tie. Obviously, as with the Pirahna, these are not climbing rated, but for tying down gear, rigging tent flys or washing lines, that is heaps. 

As with the Piranha there are numerous ways to tie and apply the Fishbones. I especially like the detail given by Brent and Eldrick in their Kickstarter proposal in their examples of how to use them.

The geometry of the Fishbone lends itself to tie-downs, with a wrap and tuck type locking, using a Prusik-like friction bind on the paracord, and sharing the load between the ribs of the tool.

The eye-hole, and "gill-slot" give solid "head-forwards" ties, whilst the forwards facing pelvic-fin and ventral ribs before the tail fin give you three separate attachment points. On the dorsal side of the Fishbone, there are four shallow notches, and one deep one, all allowing purchase of your cord, and letting it bind tightly in a variety of configurations.

One of the things I really liked about these, are the clean straight lines, which enabled me to rig them to act as a zipper pull without having to worry about snagging, in such a way that I could also quickly detach them and use them to rig a line, or tie a bundle.

The stainless steel versions acted as a nice plumb-bob when rigged correctly, the nose pointing down, in a clean straight line.

I usually have a couple of lengths of 40cm paracord in my pocket, and idly fiddle with these at meetings and on the train, working out new combinations of ties and looking for new uses. Alas I had oped that the tail would fit into the A/C vents on my train, to enable me to latch myself in when there was no hand-hold but no.

I've found the Fishbones to be very handy little gadgets to have on hand, especially when, as often happens, I have had to bundle something up that I know I will need to unbundle shortly and quickly. Blankets, jackets and jumpers. Tactical Baby's favourite woobie and the like.

I think these will make a good addition to my cord and carriage kit, giving me quick-release tie options, and keep all my things snug and squared away without having to worry about knots binding up and keeping me from my fit when I need it. They make great gifts too!

Unlike the Piranha, the Fishbones didn't interlock neatly, so a 'head to head" clasp wouldn't work. No great loss though, there are plenty of other options.

The guys behind these even posted their original concept built to Instructables so you can have a go at making your own low-strength wire prototype version.

Review: CountyComm Dropline carabiner spool

A shipment of goodies arrived that some friends and I all got together for, and I picked up a few cool things. This is something I'd had my eye on for a while, and wanted to add to my EDC pile. I have carried lengths of cord both on my person, and in my bag for a long time now, there is something very comforting about having a bunch of paracord on hand.

The problem however, is how to stow it, and have it ready. Previously I have bundled up my lengths in hojojuitsu style, in neither hayanawa or “fast rope”, or torinawa ("capture-rope") type bundles. These are self-contained and feeding bundles, but are only practical for kind of short lengths, 8m being the typical length I use, but for longer, more utilitarian lengths, some other method is needed. Paracord often comes in 100' lengths and even that is a lot of cord to hump around.

However, my fellow blogger, and knot-maker of high repute, Stormdrane worked with CountyComm to come up with this, a highly functional spool, on a carabiner, in the form of their Drop-Line RLD. This is purported to hold 50' of paracord, or 100' of of 3/32 Tether cord (which is a thinner, "dummy-cord", not unlike the Australian "hootchie cord" for doing tie-downs of gear and as guy-ropes.)

The spool consists of a Omega-Pacific Standard Locking D carabiner which incidentally has a 31kN rating along its major axis, (and is the same brand as the Rappel Rings, I reviewed a while back) and the internal Delrin® wheel which is a rigid, low-friction polymer which in this case has a split down one side to fit it to the carabiner, and two notches, one on the inside, to attach the internal end of the cord, and one on the outer rim to lock down the loose end.

You can see I started off with the best of intentions in looping my 50' of cord, feeding smoothly and tightly from side to side until I reached the rim of the spool, with about 6' or cord left to go. I could have trimmed this off, but i wanted to see just how much I could fit whilst still being able to open and fit the carabiner. In the end, with a messy attempt at the zig-zag spooling, I managed to get all 50' onto the spool, AND was just able to open the gate wide enough to feed it onto PALS/MOLLE webbing, as seen here, nestled between my Half Med Kit and the FUP I use as a bottle holder on my pack.

I've wanted to get one of these for a while, mostly because of their simple utility, and elegant solution to a common problem, and now that I have one, I want more... Perhaps I can give that zig-zag another go ...