A place for me to review the various rugged, nifty and needful kit that I've accumulated, for every-day preparedness in the event of accident, disaster or world-shifting end-times Apocalypse, be it zombies, triffids or Mayan divide-by-zero errors.
I was sent a cool little knife by the good folks at SOG, and I wanted to get my initial thoughts on it out there. I'm a fan of little knives, because they have a lot more close in utility when doing chores and around-the-bunker tasks. You don't always need a machete to cut into your MRE's, nor a "that's not a knife, this is a knife" to get your point across. Especially if you don't want to cause a scene. Be a gray man, not a rain man .... There is plenty that a 2 inch blade can do, if you've the skill and initiative, so you don't need to feel inadequate when packing a little something. Especially if you're putting it in a boot, or a pack-strap. Save the save on your hip for a tree-chopper.
The SOG Instinct is a compact, wearable fixed blade knife that is made just for those times. This is a little skeletonised blade, that measures a mere 12.2cm (4.8") with a 4.8cm (1.9") blade, with a thickness of 0.4cm (0.16") and it weighs only 31g (1.1oz) and made from a very reliable 5Cr15MoV steel. It comes with a slight clip point, which makes for easy re-sharpening when it comes time, and a molded hard nylon sheath, which is fitted with several mounting options, including an adjustable and reversible belt clip.
This is sweet little blade, and I look forwards to giving it a more through trial in the near future.
I saw a very cool article on "If it's hip, it's here" which covered an award winning Dutch design company's new product, a passive refrigeration system and a modern take on the age-old root-cellar concept.
They're not unlike the pre-made storm-shelters that have become quite popular in tornado and hurricane prone areas in the US, and even the tsunami pods that came to world attention following the 2011 Tohoku earthquakes. These are a far more sedate creation, with a far more pastoral aspect of food and produce storage. This is the Weltevree Groundfridge.
It is an ingenious way to provide an affordable, insulating, cooling and storage system for wine, fruit, vegetables and cheese. It is a modern, pre-fabricated root-cellar which can hold as much as 20 standard refrigerators, without the use of electricity and uses the insulating effects of the soil and water to keep the internal temperatures at between 10 and 12oC (50° and 53°F) throughout the year.
This airtight, water-tight, vermin-resistant and ventilated system (the ventilation system supplied can be operated remotely using an app) which also monitors the temperature and humidity within the Groundfridge. Being a small design company, their products are mostly small-production oriented with the polyester shell being hand-laminated and are fitted-out with a wooden handrail and shelving. Other options they offer include LED strip lighting and built-in cabinetry.
The Dutch based Weltevree will transport and deliver the Groundfridge locally, dig it in and cover it up with the very soil taken from its new lodging place. This covering layer of soil ends up being about 1 meter thick and has ample insulating properties for a steady core temperature within the Groundfridge as subterranean water provides additional cooling. Depending on where you live, there may be an added benefit: installing the Groundfridge may require no permit, and when digging it in, because all the excavated soil then becomes the covering, no soil need be carried off of the premises.
The Groundfridge has a storage capacity of 3,000L and will store around 500kg (or 1,102lbs) of food (Weltevree suggests the harvest of a 250 m2 vegetable garden). That’s enough to prepare 350 meals for a family of 5. its main diameter is 228 cm, (7'5") and weighs 300 kg (660lbs). So it is a significant piece of construction.
On average, 20 A grade EPC (Energy Performance Certificate) Refrigerators combined, use 6,620kWh per year, whereas the Groundfridge performs the same feat completely without any electricity. The autonomously functioning underground root cellar with a constant temperature of around 10oC. You'd need to be sure about your local water-table, including seasonal variations, because it would be terrible if it broke free due to raising water-tables, and some areas might have different subsurface temperatures.
That said, this looks like a really cool idea, and I'd love to have one myself.
I covered the original release of the prototype Gravity Hook back in March, when the prototype was sent my way by the guys from FishBones. Not long ago the final production version of the Gravity Hook arrived, with some improvements.
The Gravity Hook is a combination grappling hook, and gravity claw. (Here's their promotional video...) By removing the middle cross-bar the more than serviceable grappling hook can be quickly converted into a claw-machine like grabbing claw. The clever design allows you to swap between these two features in just moments.
Production on the right, prototype on the left
The whole assembly weighs around 360g in its stainless steel configuration, a complete assembly includes 3 links, 3 "hammers", a cross hook, and hardware, in bolts and self-locking nuts.
One of the production improvements is the notches cut into the throat of the hammer, these allow the cross hook to seat much more securely that in the prototype, where it was held in place solely via the notch cut into top of the cross hooks.
Production on the right, prototype on the left
The stainless Gravity Hook is made out of 1/8" thick 304 stainless steel and all of the Gravity Hooks hardware hardware is also stainless. When the hook is fully open, the 1.5" mouth will hold over 165lbs when biting into a 2x4.
When fitted, the cross hooks set in the jaws of the hammers, the Gravity Hook up as a quite effective grapple. The jaws are held in place and stopped from opening the by the twin o-rings which seat in a set of notches cut into the link pieces, and hold the jaws surprisingly tightly.
Production on the bottom, prototype on the top
Given their design, any the pull on the tines of the hook only act to pull it further closed, the effect of the o-rings is really quite sufficient.
FishBones have suggested that an after market modification, drilling a hole in the middle of the hammer arms to fit a locking pin, for extra security, but so far, I haven't felt the need myself.
The bolts and locking nuts supplied with the production model are a much slimmer profile than the nuts and bolts I picked up at the hardware store, that was a big help.
The production version has nicely rounded notches cut into the links, where as the prototype version is rather a bit more rough making it rougher on and harder to remove the o-rings.
Production on the right, prototype on the left
One of the other backers of the Gravity hooks asked if they wanted to use it as a boat anchor for an inflatable lake boat, how they would dislodge it should it hook onto something on the bottom. Another backer suggested it could be set up with a failable style link like this where if you pull hard enough the top link breaks and lets you pull the anchor from the bottom. A second way would be to use 2 ropes; one attached to the shackle, and the other looped through the claw to act as an emergency release in case the hook snags.
Here's me testing the grappling hook
Here's me testing the claw feature on a variety of dropped gear.
Two kinds of cross hook: plain and gear-tie batarang!
You might ask "what makes it high performance?" well, this is probably a matter of its features:
It can be used either as a 2 or 4 pronged grappling hook.
In the claw mode it "bites" objects that might slip out of a grapnel.
Compact enough to be stowed on a back pack strap, by clamping the jaws over the strap and feeding the tail end through a loop
Can be dismantled into its base components for more compact storage.
It's available in stainless steel, titanium or even non metalic Derlin.
There are also two options for the cross hooks, with the classic solid hook, as well as a version with cut-aways, both lightening the cross hook, and also offering a place to use it as a gear tie, not unlike the FishBones and Piranha gear ties these guys came to the front with.
Ss, you have a very cool tool in the Gravity Hook, but what are its limits? Well, the Gravity Hook was specifically designed for retrieving. It has not been tested or certified to bear human weight. The makers strongly state that you should never use it in a situation where it's failure or dislodging might cause bodily harm or property damage. In a pinch though, it can certainly take a fairly hefty load:
How do you get the Gravity Hook to release something whilst under tension?
Here's their testing underwater!
As well as being a really useful dropped-gear and treasure retrieving claw, and a sturdy and rugged grapple, the Gravity hook is also a really well made piece of engineering. I really appreciate its design and functionality. I've got a small CountyComm grapple, which is billed as a trip-wire clearer, but for bigger jobs, when you want to snag, yank and retrieve gear, or haul something you would do well with one of the FishBones Gravity hooks.
I wanted to go a little old-school for a bit, and cover some canvas era type pouches.
A while ago I covered an Australian issue butt-pack, that I had picked up a number of years ago, and this is along those lines. I managed to score a bulk load of retired stock in the way of pouches and bags, and these respirator haversacks were one of these.
These are British Respirator Haversacks which is NSN listed as 4240 99 800 9601. They are designed to carry the S10 respirator. I don't have a S10, but do have a full-face 3M 6000 series mask that fits nicely. Whilst I say canvas-era, these are actually a Codrura type nylon, for all the hard-wearing, non mildew and water-shedding goodness modern materials offer.
The bag measures 29 x 26 x11 cms (11" x 10" x 4.5" ) and weighs 475grams. Lacking more modern PALS/MOLLE fittings, the haversack has a couple of different attachment and carry options. A twin-stud openable belt-loop, which also features a wire hanger, from the old ALICE style fittings.
A long nylon strap with a Fastex style buckle allows for a quick waist or shoulder slung carry as well, and there is even a secondary shoestring type cold to further secure the pouch around the waist if shoulder-carried, or around the thigh id hip-carried. The cold can be secured out of the way if not in use, or removed entirely.
One side of the pouch features a hook-and-look pocket, a good size for a survival tin, a GPS unit or other small items you might need in a hurry.
The inside of the haversack is quite spacious, fitting one each of the 1L and 2L Pathopak containers with plenty of room to move. The internal dimension really give you a lot of carry capacity, and the haversack itself it very sturdily put together.
Inside the haversack, as well as the main spacious compartment are several other interesting features.
One hook-and-loop closing front pocket, and two webbing and hook-and-loop holders. These just took the 1L Pathopak's and I expect they are designed to fit additional filter canisters for the S10 respirator.
They would certainly work to fasten and store a number of smallish items, and when not in use, being made up a webbing, will simple squash out 0f the way.
The front pocket has a small hook-and-loop fixture, and features broad pockets sewn in, to fit NBC combo-pens, morphine syrettes, first aid kit, gloves and the like. They are made of the same material as the rest of the haversack, and whilst if they had been elasticized it would have been good, they probably work just fine in conjunction with the flap.
Even the top of the haversack's lid has some features, as well as the press-stud and hook-and-loop lined lip, there are twin bands of elasticized webbing, to allow you to affix a number of small items like more gloves, a first aid kit or the like.
These may not be flashy and new like a lot of other high-speed gear thats coming put, but they are rough, rugged, dependable and spacious.
If you have some bulky gear you want to have at hand, and in your ruck is just too far away, or perhaps you want to be able sling it to a buddy, stash it under a fuel depot or just need to fit your respirator ... the S10 haversack might well suit your needs.
I was lucky enough to be given a new piece of camping and travel gear for my birthday and I've finally gotten around to writing it up. I took it with me to Bali on a recent holiday, although it didn't get a very thorough workout there. This is the Scrubba washbag
The Scrubba is essentially a dry-bag which has been fitted with an internal washboard surface, a viewing window and an air vent, in addition to the watertight bag and roll-top closure
As a modern and convenient take on the old fashioned washboard, the Scrubba wash bag enables you to achieve a machine quality wash in just minutes. I wanted to give it a fairly good test, so I found a couple of t-shirts with some pretty suspicious and gross stains, and a couple of pairs of socks to give a good indicator of what it is capable of, and a standard travel-load of washing.
The Scrubba is pitched as perfect for holidaymakers, business travellers, backpackers or even for washing gym and cycling gear. The bag weighs less than 145g and folds to pocket-size, as with any dry-bag, making it small enough to take anywhere. I used it as a wet-clothes pack when on the last legs of our Bali trip, to stow Tactical Baby and Triceratops Girl's beach clothes before we headed off for the airport.
Here's how you use the Scrubba for its designed purposes:
1. Fill: It takes about 2L of water, on top of clothes, to do a full wash. Add water, cleaning liquid and clothes to the Scrubba. I used dishwashing soap, just a quick squirt, on top of my load, and the wash bag was at about 20-40% capacity. I used the printed-on guidelines, and with my two-shirts, two pair of socks load, I felt I had a good sized volume
2. Roll & Clip: I removed the excess air from the bag by scrunching it down, then rolled down the top around 4-5 times to get a good tight seal, and then clipped the ends shut, as you would with any dry-bag.
3. Deflate: By opening the nipple cap and squeezing the valve, as you would on any set of arm floaties, inflatable sheep or camping mattress, you need to expel all remaining air from the Srubba wash bag. This gives you a good working volume with which to scrub your clothes. Too much air leaves the bag inflated like a bag balloon and makes it hard to work the clothes. Too much water can have a similar effect, but less noticeably.
4. Rub: By pressing down and rubbing clothes against the Scrubba’s unique internal flexible washboard, which is a moulded-in set of nipples set into the back wall of the bag. Rubbing for 30 seconds gives you a quick traveller's wash and going for around 3 minutes should do for almost a machine quality wash. I wondered how my fairly scungy shirts and socks would fare, and was not surprised to see the water darken and grey-up. There was surprisingly little froth, probably due to the lack of air in the well vented bag.
5. Rinse: Uncliping and unrolling the Scrubba’s seal is as easy as it is to roll up. Removing dirty water from the Scrubba is as simple as carefully up-ending it to mouth it from the wide-mouth opening. I took care to retain my freshly washed clothes, and not dropping it in the dirt again. I wrung out my clothes to remove as much of the grey-water, and then tossed them all back in. I rinsed the clothes with another couple of Liters of water in the Scrubba and gave it a good shake, with the roll-top closed but not evacuated of air, and again poured it off, and wrung out my clothes. You could just as easily rinse them under a running tap or shower, but I wanted an all-in-the-bag method.
I hung my freshly scrubbed clothes out, and left them on the line overnight. In the morning, I was pleased to find not only did my shirts and socks look much cleaner, but they also smelled much better. The Scrubba bag had certainly worked well enough for a travel, camping or survival setting. I might not want to do my next job-interview in a Scrubba-washed suit, but if I were traveling and spilled cooled monkey brains down the front of my dress-short, I might certainly look to pull the Scrubba out to set me fresh for my next engagement.
Well worth looking into if you're either traveling off-grid, or frequently grot yourself up. I'm thinking it would make my next Tough Mudder trip home a lot cleaner!
His latest creation was the Titanium Utility Knife Keychain or TUKK. this slim and highly engineered tool is packed with features in its small form. At just slightly over 2" long, 1/2" wide, and 1/4" thick it is easily overlooked on a keychain, looking for all the world like a USB stick, or something as innocuous. It weighs just 15g, (1/2oz).
The blade is a #11 Hobby Blade. (typically not included for regulatory reasons, but you can source them easily enough). Brad suggests Amazon as a source for the exact right fit, as the inside of the TUKK is milled to precisely take the blade. that milling is essential to the magnetic retraction, and retention that the TUK offers.
The two halves are held in place with two T-6 screws which can be opened with the right tool for blade changes. The main case is Grade 5 titanium, while the button is brass. I found that the springiness of the scalpel blade added to the retention and deployment of the blade. As you'd imagine, it's razor sharp.
A couple of neat things about the TUKK's design are that the imbedded rate earth magnet not only hold the blad retracted, when not in use, but also acts to draw it back into the body, by just the weight of the blade alone, when upturned. This is a great safety feature, requiring the user to maintain hold of the button, with only finger pressure, to keep the blade deployed, and let the scalpel do the work.
Brad has also thought to include 1/8" and 1 cm markings along the sides as he did with the WTF tools, as well as some nice inlays on the back side of the blade for grip. The built in magnet also adds one additional feature, it makes one side of the tool magnetic, so you can pop it on the side of a tool-box, pipe, shelf or wherever you are working, and have it out of the way and ready to access at a moments notice.
Also stay tuned, as Brad has a new Kickstarter coming up, the Magnetic Quick Release, the logical next step from the TiMag keychain accessories.
my EDC was featured in the last picture ... check out my pocket-dump!
>>>ISO NSA EDC pics, Hosting Now<<< -MadDuo4You (Everywhere) pic [x]
If you can decipher the acronyms in the subject, you’re ahead of the game (and you prob'ly Craigslist). Read on to find out how to win $511 credit toward 5.11 Tactical gear.
Mad Duo Merrill's EDC. #madduo #511EDC
We’re hosting a 5.11 giveaway… you just have to send nudes post your EDC. Sharing is caring, and we’re giving it all around. We mean that in a no-homo way. Unless, you know, you're into that, in which case carry on with pride and motivation. Even though we said NSA, we don’t mean it. We’ll pick one lucky winner for the 5.11 credit…it’s NSA for everyone else.
Rules:
You must use the hashtags #madduo #511EDC when posting your EDC pic
You can post on Facebook, Instagram, Twitter, or Tumblr, the more places you post- the greater your chances are to win. If you post to our Facebook page, you've still got to use the hashtags.
Make sure wherever you post, the picture is set to public
Winner will be selected 10/26
Mad Duo David's EDC. #madduo #511EDC
Civilian as F#@k Craig's EDC. #madduo #511EDC
What is EDC? If you're seriously asking that (which is certainly possible) then bring it in, take a knee and allow us to explain. Not too long ago IG blew up with a gearcentric new trend that combines people's natural narcissism with the reach of social media and a burning love for braggadocio. Huge numbers of tactitools and tactards posted vast numbers of pictures in which they claim to carry three pistols, five knives (fixed and folders), two rifles (sometimes an SBR), 11 spare mags, a bottle opener shaped like an animal, a beard comb, brass knuckles, flashlight, some sort of metrotactical key fob and a tactical pen. Typically the only thing missing is an IFAK, a Cerakoted dildo and a pair of custom ben wah balls in AOR2.
If you have seen any of those, then you are probably familiar with the term "Every Day Carry."
Grunts: braggadocio.
So we're clear, we think a bunch of those people are full of shit. Unless you’re a traveling, temple indexing pseudo-Asian magician, we don’t believe anyone carries all that shit every day. EDC is (or should be) legitimate every day carry; it is what you carry with you no matter what.
All the lumens, all the grains, and all the magic. Petty's EDC.
There is of course and another "EDC." That one is Electric Daisy Carnival. Go on and Google image that, you can thank us later… here’s a preview of what to expect from that kind of EDC:
Check out what some more of our minions carry:
Post your #madduo #511EDC pic before 10/25 at 11:59pm EST to enter for your chance to win a $511 credit towards 5.11 Tactical. Good luck! Mad Duo, Breach-Bang& CLEAR!
It is an aluminium housed, high performance headlamp boasting three levels of light from the main LED (assuming similar stats to the HL25 a maximum of 4/50/280 lumens while in burst mode, and a 223ft beam distance). A second, red LED is built in as well, and the selection button on the side of the housing cylinder next to the power button. You cycle through the four modes once the light is on with this. 1) steady white light (cycle through power setting with power button), 2) steady red light, 3) slow flashing white light 4) fast flashing red light. The main light is cycled through its three settings by pressing the power button, once lit and both LED's are shut off by holding the power button down. Holding the Mode button down will cause the light to come up on its maximum setting, before allowing you to cycle through the modes. The lamp is fitted in a bezel and is rotatable 60 degrees in the front, with a nice sturdy ratchet action, and well crenelated ends to facilitate the turn.
Built to resist the elements, the HL35 is waterproof to 2m, impact resistant at 1m and incursion protected to an IPX-8 rating. The HL35 is powered by 2 AA batteries.
The HL35 measures 66mm (3.2") wide, 45mm (1.8") "deep", and weighs about 90g (3.2oz) so it's remarkably dense, but not too weighty. the around the head and over the crown elastic headbands. These are usually the part of headlamps that I like the least; that the lamp part either flops around or the band is awkward. The HL35 is very stable, with a thin closed cell foam pad holding it in place and adding some comforting padding and the elastic is adjustable both in circumference and over the top.
One thing about the lamp, the two buttons are a little differentiate,
especially with gloves on. I was rummaging in a dark nasty place this
week, and needed to not bring too much attention to myself (don't ask,
but I have a strong stomach), and it was tricky to select the right
option with the gloves I had on. Working out which button was the power,
and would let me alternate the three light levels, and which was the
mode button, and inadvertently set me to strobing, was a problem. I
feel that even with the mode button being stippled, and a bit larger,
the fact that they are both side-by side makes that tricky, especially
when gloved.
That said, it's the first headlamp I've
had where I didn't cringe at having to put on and use, the light was
crisp and well cast, and it was comfortable to wear. If you're in the
market, it would be well worth a look in.
My favourite vendor at the Australian Security Expo was Defence Systems Australia, which probably comes as no surprise.
Defence Systems Australia (DSA) is an importer and retailer of innovative law enforcement and security products from around the world, specifically catering to the law enforcement officer. Rather than the usual tactical type gear that I have come to love, they cover some of the less glamourous end of it all, mostly suspect and prisoner related items, to protect the officers from things like stabbings, biting and less savoury attacks like spitting and the like. That might sound a bit off-topic for a blog lke this untill you consider the old stand-bys of zombies, plagues and civil unrest. Having a less tactical layer that offers significant protection is well worth looking into, which is why DSA caught my eye.
The DSA supplies the personal safety products specifically catered to the Law Enforcement Agencies, Security, Military and State and Federal Government Agencies.
•Our throat, which harbours the carotid artery is certainly among the most at risk locations of our body. A cut through the carotid artery would most likely result in death. Our slash resistant turtle neck jacket or sweatshirt would protect this area.
•The radial artery can be found in our wrists, which often is subject to cuts during self defense or whilst protecting our face.
•The femoral artery is a general term comprising a few large arteries in the thigh. Cutting of the femoral artery would lead to a massive loss of blood within e very short period of time.
•The axillary artery is a large blood vessel to be found under your arm pits.
These clothes are built to the following standards, which meet or exceed ISO, ASTM and EN ratings for cut, and tear resistance:
ISO 13997:1999 Blade Cut Resistance Level 5 22Newtons: Cut Tex® PRO +27.8 Newtons
ASTM F-1790 Blade Cut Resistance Levels 4 1500-3499 grams force: Cut Tex® PRO 2580 grams force
EN 388:2003 Tear Resistance Level4 70+Newtons: Cut Tex® PRO 398.5 Newtons
DSA also offer a range of bite-rated protective overclothes, such as bracer-sleeves and a very clever over-the-shoulder set of sleeves. Well worth a look in if you are faced with, or can expect to be faced with biting hazards.
I'd be very keen to get a set of stab and slash resistant clothes, primarily because I often do some foolish things with long bladed shiny tools, like the Cold Steel Gladius, my very much beloved Zombie-Tools Deuce sword and the extremely useful and effective Boker Tomahook. Anyone who works with and swings big blades, or even small ones, knows there is aways a risk of cutting yourself from a bounce-back.
Those who work in offensive, dangerous environments like prisons, crowd control or event security would do well to have a layer of protection that they can wear as everyday clothing and protect their vitals, whilst still being able to go about their normal duties.
Check Defence Systems Australia out if you are in the market for bladed penetration protection.
I saw some really cool masks in my thread and I got in touch with the owners, and got the low down on their line.
DEVTAC co. inc. Japan started in 2010 and was a subsidiary of R&D Trading and consulting company. Devtac stands for developing tactics specialized in Business consulting and strategies. They have recently expanded their business to industrial designing concepts and manufacturing.
Their location is in Japan, Shizuoka ken Hamamatsu Shi Enshuhama Kenei jutaku 3 chome 2-22-204 if you wanted to visit a storefront, but otherwise they can only be reached online.
Their masks are not commercially made, but rather are individually crafted. That have some very special capabilities. These are carefully handcrafted pieces customized to fit your needs.
Firstly, the masks are only ordered directly from them through Facebook, Youtube or email.
The main frame of the masks are fiberglass, with hardpoints for adding both bolt-on armour, and accessories. For those in need of Prescription glasses you can order one here. The offer several different versions, starting with the kevlar lined versions:
The main mask has an ultralight nylon fiber mesh that is reinforced with special resin and is very flexible, it can withstand strong impacts. The open cheeks are designed for easier aiming with scope or iron sights without putting undue strain on your neck. The cheek has 3 built in neodymium N52 magnets on each corner on both sides so it is absolutely hassle free when you want to put on or remove the cheek plates as quickly as possible.
DevTac masks come in the following sizes:
regular long- men 180-195cm tall 95 kg in weight
Regular short - men 158-175cm tall , 60-80kg in weight
Wide long- men 180-200cm tall 90-220kg
Wide short- men 158-179cm 90kg-220kg
All the lens frames are ventilated by built in AA battery driven micro fan and a speed dial down by the cheek, and by some very clever design to both vent, and circulate air, they offer fog-free vision, with around a 120 degree arc of vision. The polycarbonate lenses fit into a removable frame and can be popped out to replace scratched or damaged units.
A cover is available for paintball users to stop paint getting blown into the mask from eye-hits.
For those of you who don't tend to face ballistic threats, DEVTAC RONIN MASK(fiberglass) with 7mm fiberglass plates are $ 480USD comes with 2 pairs of lens, clear and amber or your choice. Without the plates is $350USD. including everything.
BACK HELMET with extender and plates is $195USD and $145USD without plates, (as an add on), as with the kevlar version, this offers fully-wrapping head cover, and an enclosed shell, held in place with straps and magnets.
Additional options are things like a built in NVG PLATE with shroud: ($75USD-Fiberglass $135USD-kevlar) and even a MOHAWK helmet decoration for $69USD.
N50 Neodymium magnets spaced around the back of the mask, and the front of the back plate to hold it in place. Each magnet has a 1.2kg pulling capacity, so are very sturdy. The cheek plates are also held in place by magnets, allowing the user to remove them in the field to give you a cheek-weld to a rifle stock or to improve venting. The crown, mouth and ear plates are bolted on, for stability, but have venting ports, with heavy mesh below that, to give venting access for when you need.
All parts are replaceable. The mask has 1 year warranty on electronics and 2 years on the frames.
Paint options depend on the availability of the paint for DecTac at the time. They also offer water transfer prints with Multicam and ATACS now available for $80USD per frame.
DevTac aims to provide Airsoft and Paintball PPE but their venture into kevlar lining might well make them a player in designing armour or use in more dangerous fields.
They offer the Ronin helmets in a variety of colours, with the flexible polymer base and nylon mesh inner, the plates and eye lenses, along with all the straps you need for a front-facing mask, or the magnet attaching options for the back-plate if you choose to go that route. One thing you'll need to keep in mind is that manufacturing is only done every 3-4 months or so, and slots are limited so DevTac ask that interested people make a reservation.
Payments are through wire transfer, and Western Union and pre-order needs a down payment of $200USD for airsoft version and $500USD for ballistic version. Shipping is 45.00$USD (kevlar version is 65$USD) Japan Post, EMS or SAL worldwide flat rate. Extra pair of lenses are $27USD.
Basic price is $115USD it includes magnets and garter straps and triglides with no metal bolts.
$145USD will include the metal bolts and holders and leather straps. 2 years warranty.
Shipping is $35USD, and is sent via EMS Japan Post and takes 4-7days
They ask for a downpayment of 50$USD for the menpo.
The DevTac masks are most excellent to look at, and if the field-footage is to be believed, they do the trick. I'd love to get my hands on one, for shear bad-assery, let alone armoring my head.
As first seen on Breach Bang & Clear 
This is sweet little blade, and I look forwards to giving it a more through trial in the near future.
