Monday, November 13, 2017

Review: Kogalla solar bank

I love my portable batteries. mostly because I love my power-hungry iDevices and not only go to a lot of long meetings, but also occasionally camping trips and other away-from-the wall outings! Having portable power not only extends my mobile browsing and picture snapping abilities, but also makes me a hero when someone else is trying the same and didn't think to prepare.

However, even battery packs like the hefty Limefuel Limeade with its 18000mah
are only as good as their capacity. Once dry, they're done, which is why I am also really keen on alternate power sources , especially in the event of a long term power outage. My favorite power source is solar, being free, non polluting and very sustainable.

I also love it when two great flavours like this mix, such as in the Kogalla solar storage bank. The SSB2210 Solar Storage Bank is a high-energy, ultra-slim power bank matched to a high-efficiency foldable solar panel housed in rugged, waterproof fabric body.

Unfolding exposes four solar panels each roughly the size of the iPad Air 22cm (8")x 13cm (5") x 3.5cm (1 1/4") compared to (24 cm (9.4") (h) 16.5 cm (6.67") (w) 7.5 cm (0.30") (d)) and when fully unfolded it stretches out to an overall 61cm (24") when fully deployed the SSB2210 offers a huge 22 W capture capacity s worth of panels which allows for fast charging times in full sunlight.  Matching the panels to the power bank allows for energy harvesting even in low-sun conditions. 920g (2lbs) n not bad at all, considering both the panels AND battery in one.

Not unfolding the panels limits the capacity but reduces the footprint required. given that the four panels fold nicely and will constantia a bit to allow it to stand up whilst exposing more panels to the sun. This is also important when it comes to getting a good angle to the sun.

Maximum possible solar generation at your location is possible by angling the panels to the angle of the latitude at which you are located. In Melbourne, that would be 38°. You would ideally want to angle your panels at a greater tilt for maximum exposure to the low winter sun. 
The general rule of thumb is that panels angled at the latitude angle, plus 15°, is best to maximise winter sun exposure. Obviously placing the panel in the line of the sunlight is the other part of this equation. Direct sunlight is best but even dappled or overcast  sunlight will generate power, slowly trickle changing the on-board battery. 

The 10,000 mAh power bank provides long battery life between charges. The power bank can also be charged through a micro-USB power input for charging during no-sun conditions. from a wall socket tor other alternate power source like

Dual high-current USB power ports (up to 12 W) lets you power lights, accessories, or fast-charge devices. The unit folds into a compact, ultra-portable kit that includes a zippered pouch for accessories. The kit also includes a flexible-neck USB light, micro-USB cable, and lightning cable. For the charging of all kinds of devices. I especially like charging my USB chargeable flashlights and phone in a modern "make hay whilst the sun shines" situation. I also charge up my other batteries for the same reasons.

I've found that I can charge either an iPad or an iPhone but not both simultaneously, now, doing some research i find that the  An iPhone charger delivers 5 Watts (5 volts at 1000 mA) and the Retina iPad mini charger delivers 10 watts (5.1 volts at 2100 mA). so its not unreasonable to see that 5W + 10W is more than the 12 W output of the  SSB2210. Bearing that in mind, just like the Apollo 13 Mission Control team, do the math and know how much draw your gear is going to make on your batteries. Matching the panels to the power bank allows for energy harvesting even in low-sun conditions, but they can only do so much. Luckily I also have a dedicated iPhone solar charger...

Another neat feature of the SSB2210 is the fabric eyelets sewn into the middle of the unit and the four corners. These loops allow the solar panels to be lashed down into optimum position or onto something either for stability or portability. I lashed it to the side of my rain-fly one day, and also to the back of my hiking pack, such that my daylight hike would serve double duty of also charging batteries on the bounce.

I used four mounting points to fix it to my pack here, but left the bottom panels free-hanging.
 I knew I would need to be mindful of the panels when I shucked my pack, but it wasn't any drama at all on an hour long hike.

I generally keep this unit folded up and in the hydration bladder pocket of my day to day pack, ready to charge up my devices on the go, or to pull out and make myself a hero during long meetings.

 I can highly recommend it, especially as an off-grid power source in a sunny environment to keep your vital gadgets alive. I would couple it with other power generation and storage items such as the Beacon or the like. Diversify and empower yourself!

Also check out sites like Solar Calculator to optimize your solar experience!







Wednesday, November 1, 2017

Home Front: camp cooking staples

I took a solo camping trip a few weeks ago and in doing so got to try out some camp cooking without he worry of the fussy or more gourmet members of my household that I might have otherwise needed to cater for. Wanting to keep it simple and easy to pack I pre-packed some of my food, using the Dead Person Jar Pathopak's. My primary pre-packed meal I set up was porridge. I raided the baking shelves and made up a jar of rolled oats (for quick cooking) to which I added a handful of currants, almond slices and crystallized ginger. I also packed a jar of powdered milk and sugar for both my cups of tea and to add to my porridge. They worked out great. I used a cup of this mix, and made it up with a cup of boiling water, before adding a spoonful of my milk-sugar mix. Delicious, sustaining and warming on a cold damp morning.
My other campfire staple is chilli. This may provoke disputes among aficionados, some of whom insist that the word "chili" applies only to the basic dish, without beans and tomatoes but when i camp, I take cans of baked beans, chopped tomatoes and pre-mixed sachets of seasoning. A couple of onions in my cooler bag, and some frozen diced pork, this time. If I'd been camping longer I might have taken cured, dried sausage or salami as my meat component. Diced the onions and braised it in my cast iron pot over the coals, then the same for the pork. Seasoning went in next before adding the two cans of tomato and the three cans of baked beans. and some slow cooking with the lid on to reduce it all. I ate mine out of my Optimus-Terra solo cook set mug and shared my meal with a couple of friends who came up to join me in the evening. Five cans, one packet of frozen meat, a couple of seasoning sachets and two onions. Pretty simple. Not too heavy for a drive-in camp, and probably not that bad for a hike-in either, especially if those cans were shared around a little. We had plenty to eat with heavily seasoned leftovers I ate next next day too. After serving I added a dash of water, put he lid back on and put it back over the fire to heat up again to a low roil to kill off any germs introduced during serving up.
Porridge and beans make two excellent staples when camping, but some other items can find their way into your larder easily enough. Things that add both variety and value. Eggs. Eggs are great, self contained, long lasting and generally not requiring of refrigeration. In an austere setting, if you find yourself in an egg-glut, there are a number of traditional methods for preserving the quality of eggs. Packing in salt, wheat bran or cool clean ash. Eggs packed in box and buried in ash are reported as remaining fresh after 8 months in 80% of cases. Not only does it give the eggs shock and crush protection but having leftover wood-ash at a camping trip once you've eaten your food is no drama, just dump it into your fire pit and off you go. That said, cardboard egg cartons make good fire starters. When I pack eggs, its usually because I plan to make pancakes and then pack them in my flour mix, again, in a sealable jar. They stay safe, insulated and ready or when i'm ready to cook.

Not so much cooking as snacking, I also like to take hard cheese, like a block of Parmesan and salami  or slab of salt cured meat like Prosciutto. They keep well un-refrigerated and are a very tasty addition to an al fresco snack-plate after a hike or as an addition to most meals.

Friday, October 27, 2017

Review: Ikea - Grundtal S hooks


Here is  a piece of Swedish low-speed low-drag gear that  I like to throw into my camping gear that adds a bunch of utility for very little cost or weight.

This is the Ikea Grundtal S hook from their  kitchen range.

Formed from rectangular bar stock stainless steel, these come in two sizes:  11cm(4 3/8") and 7cm (2 3/4") and comes in sets of 5.

The set of 5 11cm hooks weigh 200g or 40g each. These hooks were originally intended to hang pots and pans from a rack in a kitchen, but  I have found they can serve a lot of number of helpful purposes around camp.

Analogous to kitchen use, I hang just washed pots an pans out to dry with them, as well as hooking through bags of food to hang them off the ground, because no one likes ants and dirt in their oatmeal!

I also used them to hang my mosquito-repelling citronella burner so it doesn't fall over and start a bushfire. One of my favorite uses is to add a sturdy hanging hook or my cook-fire. I also pack  length of light chain  to set up over my tripod to make a sturdy cooking spot. Especially important when I cook with a cast-iron pot which I do a fair bit when I camp. A tin billy for hot tea and coffee doesn't tax the Grundtal S hooks one bit, but on the other side, I don't need to worry about it giving way and dousing my fire. The trick is to ensure the hook is the right size for the chain links.

By putting two tripods with draped chain and Grundtal hooks on either side of the fire  I have gotten very good as a spit-roasted leg of ham, especially good 
over Easter, to fend off the hippies.

One last thing I like to do with the Grundtal S hooks are to hang up my personal kit. You can usually get away with draping kit over a branch but sometimes the perfect branch doesn't present itself next to your selected squat. That's where an S-hook comes into play, drape it over and hook your gear up! keeping it up off he ground gives items like a battle belt time to air out but also keeps it out of the dirt mud and bugs.

Keeping gear out of the mud and dry will improve hygiene and morale as well as extended the lifespan of both the gear and you on your adventure.   The same goes for clothes. Pants off for a shower? Sling them from a hook to keep it off the dirt,  you'll get fewer spiders and bugs that way.

If you're planning to catch prep and smoke game to make your own jerky or smoked salmon or what have you,  you might want to consider the spiked butchers hooks to pierce and hang your meat. Not as good for hanging gear  directly (use belt loops and such, obviously) but the principle is mostly the same.

Happy hiking!





Tuesday, October 17, 2017

Review: SLUGhaus - BULLET 02 Smallest EDC Flashlight






I have plenty of keychain tools including a couple of keychain lights, the Jill lite Constel lantern which is built around a CR-123 but rock solid and a lightweight Photon LED as last ditch backup. I have a couple of AA flashlights on my belt, including the Jill Lite Jenyx UV which is fun but sometimes even a little AA light is too much, like if you're trying to find the keyhole of your car without scratching paint, or finding whatever fell out of your pocket at the movies.

Enter the Bullet02 from SLUGhaus. Launched on Kickstarter as their Version 2, the sucessor to the succesful first version, designed to be waterproof, more minimal in design, more secure, smaller and brighter. And most importantly its damn near indestructible. (For a certain value of indestructible.)


This litle bullet-form light features a quick 180 degree rotation that with a spring lock  for secure on/off operation. It will not unlatch even under the most vigorous conditions you might put your keys sensibly through.



Bullet02 can be submerged underwater for a total of 5 minutes without any water breaching it's seals. It will illuminate in any weather and in any situation, helping you solve any darkness problem.


Measuring in at an incredibly small 10mm x 26mm and weighing in at only 5 grams, thanks to its premium aerospace grade aluminum alloy (T6061) construction Bullet02 is the perfect sized flashlight for modern day wear. Powered by three tiny little LR41 Button Cell batteries to produce 20 lumens of light, keep it with you at all times, anywhere you go. 


20 lumens isn't a lot when you stack it against some of the big tactical lights but its plenty enough to navigate in a dark house or lighting up whats right on front of you. 


Laying side by side with this drilled out .45 Auto the form factor is clear


One of the main features SLUGhaus wanted to redesign was their previous "Twist Operation". They have improved this by creating a new mechanism altogether. This time, improving the threading by making it finer and having the threading extend all the way up through the inner casing. In addition, adding a gold plated spring inside for optimal conductivity and pressure, for keeping Bullet 02 snug and sturdy at all times. I've found the
 


What is an LED you ask? LED’s are the most efficient kind of light bulbs out on the market today. One small bulb can last you anywhere from 20,000 to 100,000 hours. Of course you'll still have to replace the batteries periodically. However, they decided to use a premium 5mm bulb for BULLET 02 that can last up to 150,000 hours in lifespan. It casts a nice crisp blue white light, with a good direct cast as well as a reasonable spread for room-illuminating cast.




I've found that having my primary Bullet02 light (as I got several in my pledge) on my car-keys, attached to my titanium carbineer for extra go-fast. and it has become  a very useful, always at-hand (not in the bottom of a pocket) light, capable of acting as a "here I am" signaling light as well as its previously stated tasked jobs of keyhole finding and dropped treasure relocation. The form-factor is great the elegant bullet shape is nice on the hand, the twist-on-off action is smooth and easy to work.

Your flashlight says "Maglight replica"mine says ".40 S&W"

I haven't attempted to test for battery life, but i'd expect it to run good couple of days before running flat and whilst I wouldn't use them as a marker whilst caving, you could certainly mark out your tent or privy whilst camping to good effect with one. Given the size and the sturdiness of the triangle clip, you could even use them for collar-attachments for pets, or as personnel markers on kids when out at an after-dark event, on a necklace or attached to clothing. I like to do this on both Tactical Baby and Triceratops Girl and whilst its no substitute for attentive and responsible parenting, it allows a certain amount of freedom and adventure for adventurous and sensible kids.















Tuesday, October 10, 2017

Review: Appalling Mall-Minja wall hangers!


Originally posted as part of Breach Bang Clear's ongoing Monday Night Knife Fights series.   

I talk about good knives, swords and axes a fair bit. I'm fan of dense steel with an edge. There's a lot of it out there, some good, some amazing, and some unspeakable trash. It's the latter stuff I want to discuss for a bit.
Lets talk Mall-Ninja wall-hangers. First you might ask, what's a mall-ninja?
A mall ninja is a breed of weapons and combat enthusiast characterized by being so ungrounded in reality as to make even the most hardcore gun nuts shake their heads. Equal parts naïveté, delusion, and obnoxiousness, the mall ninja contributes to countless ill-informed online debates concerning arms, armor, and warfare, and is a common consumer of assorted paramilitary woo, broscience, and shared misconceptions about history and the world. The term "mall ninja" is pejorative; no one self-identifies as such. We hope.
If you're worried there's a simple test you can take to assess your-mall-ninja status.   Good luck.
Now, if you're an avid Master Ken of "Enter the Dojo" disciple, you've probably had all the training and experience you'd need to make your own correct choices when purchasing your own pointies.
When it comes to some real Mall-Ninja wall hanger blade there are some key aspects that seal the classification:
  1. Black. Real Ninja's need black weapons for their Tier One Wet Ops. Powder coated, painted, teflon coated, oxidised, it doesn't matter.
  2. Cord-wrapped handle. Every real street-samurai wants their blade wrapped samurai style, and that means cord-wrapped.
  3. Curves. Like every bad-lady out there it has a curves and every mall-ninja want's a bad lady of their very own.
  4. More curves. See Above, but unnecessary curves are even better.
  5. Extra cutting surfaces. Primary edges aren't very high speed-low drag. For true body-dropping power, you need blades on all faces.
  6. Unnecessary serrations.   It's not a sharks mouth, buddy, its a knife. You need a chainsaw, get a Husky!
  7. Tactical sheath. Drop-leg, back-scabbard or just "ballistic nylon".
  8. A scary name. "No one would surrender to the Dread Pirate Westley."Add a few "NINJA, ZOMBIE or DEATHs in there for good measure.
However; there's a lot of shiny bling out there. Here's a quick guide to some examples.


A - Zombie ass kicker. This is a bad-assed blade, but a serious wall-hanger. Extra serrations, extra edges to catch and snag, it's styled after the Aztec war swords to look extra scary. Ribbon-wrapped rather than cord, and a pretty thin, light steel. I don't have much faith in it's utility.
B - Living dead apocalypse full tang ninja sword.  Twin blades are better than one, obviously. Extra curves and serrations along the non-striking edge of the blade, as well as holes cut into the blade to lighten it, adding weakness.
C -"Hunting Knife." Perhaps if you're the Predator tracking Dutch and the other Rescue Team members.. This no-name piece  actually performs pretty well, regardless of its extra curves, useless serrated spine and extra holes. Its "full-tang, one-piece construction" is quite sturdy and the cord wrap handle well done. It's pretty well balanced, well finished, and were not for the extra holes and the saw on the spine, it might not even qualify as a Wall-hanger for Mall-Ninja's were it not for the dual shoulder strap back-holster  and the extra holes.
D - Black legion undead machete. Scary name, and wicked post-apocalyptic hammer finish. Now just add to the list the impressive looking spiked knuckle-guard, the "zombie-green' cord wrap and the drop-leg sheath and you've a "take-em-all-out before they getcha"special to scare mom with if she ever busts in on you practicing kata in the basement. water-bottles and melons of the world beware. To be fair, the blade appears to be well made, but the fitting are a tad flimsy for my tastes.
E - Z-hunter-axe. Not really an axe. Not really a hunting knife. Unnecessary saw-back serrations, extra curves and hooked edges. Great cord-wrapping and a single piece of steel for resilience, with sick jolly roger logo for extra-scary pirate aesthetic. Maybe if you're going from to room on a beached Somali cargo ship? I have a feeling it wouldn't  serve too well dressing a water-buffalo either. But zombies? narp.
F -KA-BAR War sword On first glance, this one looks like a prime candidate for Mall-Ninja wall-hanging.   It's got some curve to it, a lurid green scale grip, for extra zombie killing power, and a fully decked out nylon thigh sheath. However, its a serious work horse of a knife, but the scary name, and green scale gives them the potential for Mall-Ninja wall hanging.
G - Ontario Black Wind. Not every Mall-ninja wants a blingtastic katana straight out of Highlander or Blade. Some might prefer a more-or-less traditional "ninja-to style" short, straight and heavy sword, which is exactly the kind of blade that the Ontario Knife Co. put into Army Disposals and into the pages of martial arts catalogues. This is a bad-ass blade, undeserving of any scorn, and is in fact one of my go-to blades in the event of Apocalypse or civil unrest.  Even with its high-speed looking kydex scabbard,  just too good to be a wall-hanger.
H -Cold Steel Gladius. Last up from my own collection is the hungry-for blood Gladius from Cold Steel. Now, even the mighty Roman armies had their own groupies and  modern-day hangers on, thanks to a steady stream of "sand and sandals" action pictures. The humble Roman ground-pounder was issued one of these Gaul-stickers and bade go forth and pacify the Empire. The modern version hanging on my wall would have been a high-tech marvel of construction but fit in nicely in the shield-wall. I don't recommend trying to take that angle when trying to explain why you have one lashed to your hip with your Company First Sergeant, but, if you wanted a big ass blade for defending the empire "outside the wire" you could do a lot worse than one of these.



Lets take a moment to talk thickness. Cheap blades are often cut or pressed  from sheets of thin steel. This doesn't offer much cutting mass, strength or rigidity, all things I would want in a fighting blade. Different steels have different densities so its hard to gauge what steel is in the kick-ass zombie slayer you found at the disposal store, but the thickness of the blade can be a good indicator. I've found the thinner the blade, the less likely to be a practical tool (unless you're cutting sushi or shaving).



So. My last bit of advice to prospective blade collectors: Buy quality. It needn't be expensive, but should be from a reputable maker, be it a big company or a small smith. Be sure to give your new-found tool a run through its paces, before staking your life on it, (and get some formal training if possible). Don't be a mall-ninja.

Wednesday, September 27, 2017

Heads up!: Zu Bladeworx Warmonger Releaase for Pre-Order

Zu Bladeworx Warmonger Available for Pre-Order

First published on Breach Bang Clear here:

One of my favorite bladesmith companies, ZU Bladeworx in New South Wales, Australia, is accepting orders for their newest bladed weapon: The Warmonger. Note that I didn't say "tool." I might sometimes use euphemisms when it comes to blades, but this is a weapon.

Apparently styled after the Imperial Chinese dadao knife, this hungry-looking cleaver will, I have no doubt, ship to you straight-razor sharp and ready to cut things in half. I fully expect the single piece construction that typifies ZU Bladeworx blades. That style, which has scales or embellishment, lends itself perfectly to cord-wrapping and multiple attachment options with the well-made Kydex sheathes and mounting hardware they offer, as well as  a number of finishes to suit your MOS.

If the name sounds familiar, you might recall them from this FFSK review.

So are cleavers tools or weapons? I chat with people about this often. Fundamentally it is the human brain that is the ultimate weapon; a knife, gun, or axe is just an inanimate object until the human brain gives it intent.
Some tools have been designed with a primary purpose aimed at combat. Some knives are clearly tools that could be used as weapons if intent was there. I know it grates on me when I watch Forged in Fire and they call EVERY knife a weapon.
As I mentioned to a ZU Nation member the other day, I like to design functional, legal and collectable weapons. Not necessarily for carrying or self defense, but to collect, like coins or watches. I call them weapons not to be a hero, but because I like industrial, futuristic versions of medieval and martial arts weapons.
I was at the cutting-edge knives display at the Sydney Show and was eyeing off some kiku and nemoto knives, very tactical-looking and scary to non-knife people. A guy next to me said, "What would you want that for? It is useless as a tool."
I told him it would be for my collection. What is the use in collecting cheap shit? May as well collect good stuff, or why collect at all. Would I carry a Spectre? No. I don't carry any knives to be honest. Do I play with them at home? All the time. Every knife we make is a functional tool, and an efficient weapon in the right hands.
Recently released and rapidly all-sold-out Omega weapons.
Warmonger preorder opened the 15th of September. Reapers opened July 1 so that makes it mid September for shipping. Machining on the Warmongers began September 15 so that seems like a good day to open the preorder. That way the Reapers and Spectres will be almost ready to ship out. Wave 2 Reapers will ship within days of Wave 1. I am actually trying to get these out a little earlier.
ZU Nation price will be $429 plus post for knife and kydex. Attachments extra.
Installment plan as follows;
1) $200 - (plus you can add attachments if you want them)
2) $229 plus post (about $20) due four weeks later
I've done one of these pre-releases and am extremely happy with my Grunt. It's a decent system and  I trust the folks at ZU Bladeworx to deliver.
Here is a batch of their also-sold-out Reaper weapons, commissioned by the ADF. This lot destined for the soon-to-deply 1RAR.
Happy Hunting, lads!

Late update from Matt of ZU:
"So more details on the Warmonger, subject to change but pretty sure it is right.
100 piece run, I can't see us doing a second wave.
Base blade with kydex is $495 (ZU Nation members get a coupon to take off $66 to make it $429 like I promised). This includes tufftride finish and black kydex (no attachments). Coupon will only work on wave 1 (in the unlikely event we so a second wave).
2 part installment. The coupon will work on installment 1.
Postage is $20 (3kg exp bag with sign sticker)
Options:
Cerakote one colour - add $25
Apocolypse Cerakote (red or bronze) add $75
Tek Lok - add $25"

Friday, September 22, 2017

Wish-Lust: TREEO Utiltiy hammock

So, this one is a bit "after the horse has bolted" but I thought it worth bringing to all your attentions as a good looking product. Coming out soon. I've always been a sucker for hammocks, and multi-use items and this is both in one. The TREEO is a "3-in-1" Utility Hammock "that does it all". From hammock to beach blanket to rain fly within seconds, the TREEO is the Swiss Army Knife of hammocks. Designed with the outdoors in mind, we wanted to create a product that could be utilized by anyone, anywhere. From the avid adventure seeker to the family who spends summer nights at the park, the simplified design can be taken full advantage of with it's 3-in-1 capabilities.

Made from a 2.75cm x 2.25cm  (9'x7.5') rectangle of Diamond Ripstop Nylon Material known for being lightweight, durable, and waterproof with triple-stitched & taped seams preventing any rips or tears. The TREEO  features a paracord drawstring through the two  7.5 foot sides, which allow it to quickly convert from a sheet to a hammock. The nylon is 1,000 PU grade waterproofed and the hammock is rated to carry 226kg (500 lbs) thanks to the stitching and use of paracord as the strapping. With its own sewn in stuff bag to keep your valuables at your side when in use. it packs down into itself to a  23cm x28cm (9" x 11") and including its compliment of  2x 6' tree straps with 8 loop, its 2 carabeiners and 4 stakes for ground cloth mode. it weighs in at a meager 1.27kg (2.8lbs) 


So, as well as a hammock, it will work as a ground sheet, a rain fly and a shade cloth. Webbing loops at each corner allow  a variety of attachment and set-up positions.


 The Range Travel Goods team are a group of passionate travelers that together have visited over 60 countries. They are now committed to creating products to make travel more simplistic and easy. The Boise, Idaho brand was born on Kickstarter with their first product, the Duo Travel Pillow and now continue working on other travel essentials.

 I really liked the idea and look forwards to mine arriving once they've made it through production ,adding to my array of hammocks.
Related Posts Plugin for WordPress, Blogger...