Friday, September 9, 2016

Review: Agalite Wind Warrior jacket

It's been a cold winter and I've covered my very cool Baubax jacket which has pretty much been my go-to for all my outdoors activity this winter, but it's feature rich design actually limits it in some instances; its a bit big and bulky, and has too much going on. Sometimes, quite often in fact, I want something simple and flare-free. I was blessed with a care package from my lads at Breach, Bang & Clear in the form of this spiffy jacket from Agalite, emblazoned with the BB&C logo. It arrived over -my- summer, so I didn't get much use from it for a few months.

Once everything stopped burning all the time here, and the cold and wet set in, I found myself pulling this jacket out every now and then, and then it came to be my go-to travel-jacket, living in my SUV for any time I was out and about and the weather took a turn. Which it does all the time in Melbourne, comically.

This is the Agilite Wind Warrior fleece jacket which was "designed to keep Israeli Military Operators warm during static operations". That should tell you a few things about it for a start.

It is built from 3 thermal layers including a wind-blocking internal membrane that keeps out cold winds. Fleece inside and out it's soft and snug with that instant warm feeling you get with a high density fleece. However its that inner windproof layer that really makes the jacket what it is. I've never had  a soft-shell jacket that cuts the wind like this. It's much more like a hard-shell. In fact, I actually had problems with overheating and sweating on my back and arms, in milder weather. That's probably my biggest fault with it.

It doesn't breathe. I've put it back on later to find it still wet on the inside, which might be a problem for proper sub-freezing cold-weather users.

A chest pocket on the left breast is quite spacious, certainly big enough for a phone, documents and the like. The choice of fabric change for this panel was a little strange, I guess it makes it lighter, but I don't see the need for it. The zipper is nice, and fits into the folds, out of the way until needed. The right sleeve has a bicep pocket, and whilst I rarely use these, I found it well placed, and unobtrusive.

The sleeves themselves were well fitted, and a good length, something I often have troubles with my extra-long arms, with elasticised cuffs to seal out the wind. I found I couldn't push the sleeves up very much, due to the tailoring but given its designed purpose, this isn't too much of a big deal.
Both biceps also feature broad square loop-fields, allowing considerable amounts of patch-goodness to be attached, I really appreciate a bit of real-estate here, for bigger morale patches, or combinations. The loop-fields are also really well colour matched, so they fade into the rest of the jacket nicely when unadorned, both in tone and also in tailoring.

The main zipper comes up nicely, even when the jacket is fully closed, another aspect where the tailoring has been really well thought out. You get a good close seal, without it being restrictive or obtrusive into the throat.
This also covers the waistline, which is another aspect that I often get caught out with, but the shock-corded waistline keeps draughts out and my kidneys snug. The jacket lacks fancy features like a hood, internal pockets, or a variety of other extra features sometimes seen. However, it has properly lined pockets which I'm only too happy to be allowed to make full use of on cold mornings.
It's also light, and packs down really well, which is a bonus for when it warms up and you shed it. The jacket has lived in the back seat of my SUV for months now, served as both blanket and pillow on a number of occasions, as well as keeping me from shivering on a number of occasions. If you're looking for a light, well put together and simple wind-killing jacket, you could do a lot worse than this offering from Agalite. Go scorpion or go home.

Friday, September 2, 2016

Review: Lumintop Tool AAA flashlight

I've been very remiss about this one, this little light has alternated between sitting in the bottom of a couple of bags, and then pockets of both pants and jackets. This is both to its credit and a flaw, but I'll get to that.

The Lumintop Tool AAA is a very diminutive light, at just over 8cm (3.2") long, and around 30g (1oz) it really is pocket sized. Taking a single AAA battery, the machined aluminium body is less wide than a single AA battery.

A single tail cap button at the rear enables the user to cycle between the three light modes with momentary toggling, which starts at a Medium of 32 lumens, then to a 5 lumen Low setting and ramping up to a 110 lumen High setting. I really like this pattern, with a medium setting to get you out of the dark, a low setting next to enable you to do your dark-work without disrupting your night vision or drawing unwanted attention at the Watergate Hotel.

Having the High setting last means that you have to call it up and not only reserve battery power, but also maintain control over the amount of light you throw, till you need it.

Another excellent feature is that once the tail cap switch is "on", the head is on swivel, allowing twist-driven switching between the three modes and "off". There are o-rings sealing the unit at both the head end and tail-cap end, either of which can be used to replace the battery.

My favourite aspect though is that the detachable two-way clip, which enables you to fix the light directly to a cap-brim, giving you a keychain sized head-lamp at a moments notice. You won't be using it to chase alligators in the sewers, but find yourself with full hands in the rain and having dropped that screw from your widget, and you have yourself a good-to-go tool for the job. It's low weight makes it ideal for this use.

It's tiny size means it gets lost easily, especially if you have a lot of loose gear rattling about. AAA's are not high-power, or long lasting, but for occasional utility use, they'll do. Threading a lanyard through either of the lanyard loops in the tail-cap, or clipping it to a keyring would probably go a long way to retaining it.

It's not a searchlight, it's not a weapon-light, its a pocket sized keychain light with a very light profile

Here's some links from the vendor:
CA Amazon store http://amzn.to/29LZfWx
UK Amazon store:http://amzn.to/293oBQQ
IT Amazon store: http://amzn.to/29cRxlC

Friday, August 26, 2016

Review: MRE review 1/2 day's rations


I had the opportunity to take a pile of Australian issue MRE components to work to test out, following on from a small selection of them falling in my lap from more than one undisclosed source. I will not be on-selling these, they're for my own entertainment and preparedness.

I wanted to give myself a good trial, so selected a full menu to replace what I would normally eat during the day at work. It is common to see "8,700kJ" as the average recommended intake and I have breakfast, lunch and two breaks at work, so I selected accordingly.


For breakfast I had a brown of muesli/porridge, which I mad with boiling water and a sachet of instant creamer. It made a solid, heavy and hearty porridge, which was flavoursome and had enough variety of ingredients to have a good and palatable consistency.










I had the "blueberry and apple" cereal bar for my mid-morning snack, it was again, dense and for all intents and purposes, could have come out of any kids

Interestingly when I looked up the nutritional content of current US issued MRE kits, they suggested that service-members (who were classified as highly active men between the ages of 18 and 30) typically use about 4,200 Calories a day. The conversion is  1 kJ = 0.2 Calories (Cals)or 1 Calorie = 4.2 kJ, giving a figure of 17,640 kJ a little over double the "average adult intake diet". Bear that in mind later.

Lunch was a bit more involved; a sachet of freeze-dried rice, beef and onion stew, a can of "diced two-fruits in syrup" with a sachet of tropical flavour Thorzt sports drink powder to drink.

The dehydrated rice was reconstituted with a canteen cup's worth of boiling water, and once ready, I simply upended it into a bowl, and added the cold stew to it. I could have tried reheating the stew, either by suspending its retort in a bowl of boiling water, or throwing it all in the microwave, but this would totally have been cheating.
It was a pretty decent meal, there were enough chunky bits of meat and onion to make it more than just thick gravy, but it was hardly a hefty chew. The stew itself was quite palatable cold, but a quick mix with the hot rice made it all the better.

Obviously you have to reconstitute the rice to make it in any way enjoyable, but it will reconstitute in cold water, if you don't have a source of heat, or are under restrictions.



I finished off my lunch with the can of fruit in syrup, which I popped open with my trusty EDC P-38 opener, and tucked into the just-as-off-the-shelf canned fruit. Nothing special to report there though.












For my afternoon break and to snack on in e afternoon, I had selected the chocolate drink, infamous canned cheese and even more infamous chocolate ration. Again, boiling water into the chocolate drink, which made a quite passable hot chocolate.

If I had wanted it to be extra creamy, I could have saved the instant creamer from breakfast and added it, but I think it didn't need it.





The Bega canned cheese, reported to me as a legendary constipation cause, appeared to be exactly the Kraft cheese stick cheese, in a can. It was firm but elastic, and "split" rather than crumbled. It was tasty enough, and reminded me of school-yard snack breaks for sure.

Lastly was the equally infamous legendarily laxative chocolate ration.  I don't actually enjoy milk chocolate, but I wanted the full experience, and even with all the food I'd included in my half-day's ration, I wanted to make a real showing of it.
I snacked on it throughout the afternoon and finished it just before going home, and suffered no ill effects.

Perhaps the cheese and chocolate battled each other into a stalemate, but I was the victor.

Adding up the constituents, I had had 8907kJ (2129Calories) in this selection, and this was just my daytime food.

All this, and I was pretty full, and certainly didn't feel that I had gone without. If anything, I felt I had wanted to eat the cheese or the chocolate, but not both.

It's also worth noting that this only made up a small portion of the full ADF ration-pack. Given that, and the full kJ load in that full pack, you could make one of these stretch a long way, or spread them out between a number of people to make a survival situation both more palatable, but also more secure.

If you can lay your hands on an MRE, you'd have to go a long way to find a better, more densely packed, supplied and readily consumable source of nutrition and energy than the ADF ration-pack. If you're in a position to lay hands on one, do it.

If you're in a field where you might be able to swap out, try swapping for an ADF rat-pack, you won't be disappointed.

Saturday, August 20, 2016

Review: Baubax jacket

Its just about spring-time here in Melbourne, which means a lot of rain, and cold mornings for me. I hate the cold, and hate being rained on. I am a big fan of soft-shell waterproof jackets and having lots of pockets, but sometimes you want something more than just rugged and dependable, when it comes to snivel-gear. You want something nice.

I saw the Baubax jackets on Kickstarter and their portal site (and was directed to them by umpteen people) and really liked what I saw. They offered four designs, (Dress Blazer, Sweatshirt, Windbreaker and Bomber) in a range of colours, and materials, which all featured a mass of features. Billing them as the "Worlds Best Travel Jacket". I jumped on the bandwagon and eventually, after much delay, they arrived.



I ordered the heaviest and feature-packed option, the Bomber.

A travel-friendly Bomber Jacket with stylish flare, this street-smart piece features pockets for all your smart devices, a built-in neck pillow, an eye mask, and a detachable hood. But that's just a handful of features.

The jacket is made from a machine washable 100% polyester soft shell, with cotton and fleece linings, and weighs in at 1.2kg (2lbs 10oz) making it quite a hefty piece, but that weight gives warmth and security.

It is also PACKED with features:


GLOVES: Built-in half-gloves that easily slide in and out of the sleeves, to keep you warm and cozy when you're on the go. Made from cotton, they will soak up water if you wear them in the cold and wet, but they cut the wind in dry conditions and are really great on those cold morning train-station waits.

EARPHONE HOLDERS: Built-in Earphone holders always keep your earphones untangled and ready for instant use. I havent really used this much, but the loops make really good deep-cover securing locations.

BLANKET POCKET: All BauBax jackets come with a pocket to carry the optional extra proprietary 60"x40" BauBax Blanket that'll keep you warm and cozy when you're traveling. If you don't get the blankie, another woobie or even a dry-cloth would fit in there nicely.

KOOZIE DRINK POCKET: No more fumbling with your drink and your laptop on a plane table tray. With an insulated neoprene drink docket, keep your hot drinks warm, cold drinks cool and your hands free for work. I have only occasionally actually kept a drink in there, but the padded and press-stud fastening pocket is good for loose valuables you want to keep protected.

iPAD POCKET:A 10" pocket to carry an iPad or any full size tablet to free up space in your carry-on or purse and for more convenient plane boarding. This is excellent, and I have stowed my iPad in there a number of times. It just "fades away" into the side pocket, seamlessly and is right there when needed. Be sure to do the little zipper up though, lest you drop expensive delicate technology.

TELESCOPING PEN: This was a cute addition. Clipped to the main zipper is a 1" pen that extends to 4", the bottom of the telescoping pen has a soft tip Stylus to ensure you always have a Stylus handy. It's totally not integral to the jacket, but a very nice feature nevertheless.

SMARTPHONE POCKET: Easily accessible water-resistant smartphone pocket that offers a seamless connection to your earphones., built into the upper outside of the chest on the left, it was a great place to secure my phone when out on the mountain recently.

SUNGLASS POCKET: Easily accessible sunglass holder in a pocket in the upper right side of the inside of the jacket to keep your optics safe and handy. Built-in Microfiber cloth included for cleaning sunglass lenses was also a really nice touch.

PASSPORT POCKET: Passport size inside chest pocket designed for quick access to boarding pass and ID while traveling. Keep your secure documents secure, and handy at the same go. Obviously they're not as safe when the jacket is open, but a damn side safer than if they were in the back-pocket of your flying jodhpurs.

HAND WARMING POCKETS: Multi layered hand warming pockets for extra warmth. I can not stress enough how good it is to have properly lined pockets. built of the same material as the rest of the jacket, both the inside and outside of the pockets are equally warm. No more still-freezing from the inside with these pockets, even with the jacket open.

DETACHABLE HOOD: BauBax Bomber and Blazer come with a detachable hood. The hood features a double press-stud gorget for really bad weather, and zippers onto the body of the jacket, behind a quilted collar that matches the waist and cuffs.

EYE VISOR:  Inside that hood is a fleece eve-visor, which forms your very own shade-cloth and eye-patches when you need a daytime nap, or just don't want tot make eye-contact whilst browsing for saucy delights on your phone in your lap. I found however, that the visor flopped down over my eyes when I was walking around with the hood up. A button-eyehole would have been a good feature to include on this.

NECK PILLOW: This was super sweet. A semi-built-in, inflatable neck pillow that easily hides inside the hood of the jacket, by means of a buttoned down compartment, but was also easy enough to hang behind the shoulders from the hanging loop. Its innovative valve technology allows for a 2 second, one breath inflation. Simple and easy one press deflation, as well as a very comfortable design rounds it out. Also not integral to the jacket, it was a brilliant addition, especially for those of us who often find ourselves sleeping in odd places, at odd times and can't just rack-out.

this was a really good jacket, and I'm glad I had it this winter, and spring, although we had to wait a long time for them, and the sizing of the ladies sizes (I got one for Omega as well) was a bit limited.  That said, the jacket held up well in all kinds of inclement weather, including snow and sleet. The cotton cuffs soak up water, and wold be better is treated to be waterproof, but otherwise, its a great jacket.

Wednesday, August 17, 2016

Movie review: Viral



I had a early-to-bed, doing work-from-home, kid-free evening this week, so got to watch a movie of my own choosing. It was pretty cool. Not the movie, getting to choose a movie. Actually, I choose the movies fairly often, but this time I didn't have to take anyone else's interests in account. So I chose one that seemed to be near to my heart. A infectious disaster zombie movie! Yay!

End of the world movies! With science, and zombies. Yay.

 The movie I selected was "Viral" a 2016 straight-to-DVD, as far as I can tell. Here's the basic synopsis from IMDB...

Emma and her sister Stacey are normal teenagers in a small town, when a mysterious infection begins to spread. With the town quarantined, and their parents stuck on the other side of the barrier, the girls have a blast eating junk food and sneaking out to go to parties. But when the disease starts to infect people they know, the girls, together with their neighbor Evan (Emma's secret crush), barricade themselves into their home.

But it may already be too late, as the infection is already in their midst, and Emma will be faced with a choice: protect her sister or survive the virus.

The infection, it turns out is NOT a viral infection, its a multi-cellular parasite, a nematode. A worm. Brain worms! This bothered the scientist in me, as the damn title of the movie was misleading, like if "The Lion King" was about the king of leopards.  However, they did some pretty cool stuff with the premise. Making comparisons to the fungal brain zombie ants,  the "eat me, eat me" behaviour in Toxoplasma infected rats and the flesh burrowing botfly maggot, the disease is spread by a bloody cough from an infected person, victims who become more an more aggressive and essentially, zombied as the worm interacts with the brain.

As a zombie survival film, it was really good. Government intervention in the form of military isolation, martial law, CDC quarantine with spot-checks, house-confinement and eventually, internment and "sweep-and-clean" roundups, followed by liberal airstrike-firebombings.

The disease/parasite aspect was not badly handled at all, and apart from a bit of "too smart / controlling" suspension of disbelief being required, it also had some really good aspects. The infected became blind when the parasite took over, relying on hearing to guide them to new victims which was a nice touch.

The quarantine included delivery of CDC goody boxes of MRE's and survival gear.  Flares (used to signal the military in the event of an infection in the early stages of the outbreak), face-masks and poncho's (for preventing / reducing he risk of contamination) and the like. It was also good to see "we are prepared for this kind of thing" reactions from the populace: under-stocked cupboards, closed and emptied shops, early evacuees and armed cordons. All good things to expect from a dangerous outbreak.



I really enjoyed the movie from a disaster preparedness and response perspective, only had a few "nooo! shut the door, what are you doing?" moments from the kids, and apart from the one or two bits of "hive-mind/pseudo-science" junk, it was remarkably believable and internally consistent.

 It really held the tension, and bleak prospects of a widespread, martial-law enforced (and out of control) quarantine as well as the worm-zombies. Well worth catching on your local streaming movie network of choice.

Monday, August 15, 2016

Sneak-Peek: ADF ration pack H

Behold the full contents of an ADF Ration pack, menu "H".

I had the good fortune to have some of these fall into my grabby hands, and I wanted to show off the contents.

This represents an entire days consumables for an Australian infantryman.
 
 


 
Bundled in a heavy plastic cover (broken, for legitimacy's sake).

Snacks, three meals, drinks, tea and coffee, a FRED eating tool, spoon, matches, wipes, Vegemite, all a fighting body needs. 

Stay tuned and I'll cover what a meal is like in more detail.


Wednesday, August 10, 2016

Review: MTech hatchet1


I have a great fondness for hatchets and tomahawks, and have quite a collection these days, ranging from the low-key Fuller camping hatchet to the knockabout United Cutlery M48 to the singular Boker Tomahook.

A new addition to my armory was a very blingtastic addition, is the MTech - Tactical axe.

At 36cm (14 1/4") overall, this is a decently sized chopper, and at 650g (1.4lbs) its a lightweight piece. Lighter than I would have expected. The axehead is 18cm (7 1/8") with a 9cm (3 1/2") cutting edge. It has a spike on opposite end, some interesting secondary edges, and to top it all off, it's titanium anodized to a gold finish.

It has a black rubberized ABS handle with lanyard loop, which was lightly textured, and peppered with 7 locking bolt and nuts, with Torx fittings. One thing that struck me was that ABS, it really felt flimsy.

Not that it was flexing under my grip, more that it was light, and sounded hollow. The black nylon sheath was simple enough, with a press stud retention loop, and press-stud closures at the rear to keep it in place.

The blade was shipped-sharp, and had a knife edge, with deep secondary grinds not only along the primary face, but also a deep inwardly curved bite in the top of the axehead, as well as the underside of the beard as well. The top of the axe also features a set of aggressively cut jimping.

 I was hard pressed to think of what that top scalloped edge would be useful for, except as an "upwards" thrust with the axe. However, scalloping the blade inwards, rather than having it sweep forwards into a point like in a Dane Axe seemed counter productive. Perhaps as a branch trimmer? More likely to make it look extra cool and scary. Gold. Plated. Scary.


The edge at the underside of the beard was alright as a down-sweeping cutting edge, although it did come back quite close to the very top handholds, and my delicate pink flesh, when using a choked-up grip.

There are cut-aways in the bottom of the axehead for thumb and forefinger to rest in, and they were well placed, but again, there was no beveling, and the sharp edges seemed too close and unguarded.

At the back of the axehead is a spike, ground down into a diamond cross-section, and down to quite a significant point.

I liked the geometry of it, and it certainly had a fair "bite" when punching holes in logs, chipboard and cans.

Overall, the cutting power of the axe was somewhat limited by its light weight design and whilst the knife-edge blade was sharp, and with a thin cross-section. It chopped into boards well enough, and cut through bike-tyre like no-ones business, but on a meaty target like a log, it bit and stuck.

Too light to travel deep enough to cleave, too narrow to form a splitting wedge.

I gave the butt-end a strike, to test durability and its utility as an impact weapon and THIS happened. The ABS plastic, which is what LEGO is made out of, shattered at the shock of impact.

It also exposed the inside of the axe handle, which is something else that  I wanted to bring up.

Having felt how light and "hollow" it sounded, I had taken the handle apart with my trusty min/Inch TORX screwdrivers, and popped it open.

It turns out that as well as the thin and hollow framed handle, which I could have lived with, and probably either filled with resin, or replaced with a cord-wrap, the handle itself was made of three separate pieces of different steel. One for the Ti-anodized blingtastic head, a powder coated lanyard loop piece at the butt-end, and a plain piece through the middle.

I'm sure that made the fabrication easier, but I don't know what kinds of steel are in there, and the welds don't look all that flash to me. I would have some concerns about wailing too hard on a solid door, or a wall, or even a tree-trunk with this.

Perhaps a metallurgist out there can tell me otherwise, but I'm going to relegate to the back of the collection and save the serious work to serious tools.

It seems my MTech Extreme Cleaver was the exception to the rule that these are not hard-use tools.
Related Posts Plugin for WordPress, Blogger...