Review: UVPaqlite

I had a comment left for me by a reader on my Facebook page (g'day LCpl Thralls!) following on from my Lazerbrites post I dropped by UVPaqLite to check out their glowsticks.

I'm a sucker for lights, as my regular viewers would know, and have an enormous affection for glow-in-the-dark products, having decorated many childhood bedrooms with constellations and have expanded that into my adult life with the SAR GlobalTool Moon-Glows. I was impressed by the range of rugged, practical items that UVPaqLite had on offer, and snapped up their mixed collection Scout Pack.

 I put my Moon-Glow down beside the collection for a comparison as well as a wrapped cyalume stick, for scale. I super-charged all of these with my Jil-Lite Jenyx UV torch

The scout pack consists of four different elements; the UVGlowStik, the 6" ToobLite, a UVO ring necklace and the flexible signature UVPaqLite sheet. 

The UVGlowStik, ToobLite and UVO are solid pieces, consisting of solidified clear epoxy, in which crystals of
glow-in-the-dark strontium aluminate are suspended. Being solid-state, these pieces can be cut or drilled and can also be taken to ANY depth. 

Unlike traditional GITD products, the large crystals are clearly visible but apparently this large granularity increases the brightness, duration and speed of charging, they certainly appeared to do so.

The 4"x1/2" UVGlowStik is not quite as bright overall as the 6" ToobLite, but is "ruggedised", lacking
the tube, plastic cap, and key chain ring of its larger cousin, but features a drilled lanyard hole.

Swiped from UVPaqLite webpage.

The UVO is 1.75" in diameter, and comes in both the traditional greenish GITD hue, but also in their "Ice Blue", but subtly adjusting the chemical composition of the crystals. Spinning the UCO on its lanyard produces a signalling method of contrasting of light and movement which would make it easier for rescue crews to see from the air.

The UVPaqLite flatpack is a vacuum sealed roll-able, stuff-able, pouch measuring 20cm x 15cm (8"x6") and weighing only 36g (1.3oz) and can be dangled or laid flat to provide a tents forth of illumination all night long.  Better yet they have an essentially infinite shelf life, unlimited recharge cycles. Perfect for a disaster, where resupply, or even infrastructure is doubtful.

I found that the whole set could be exposed to electric room lights for "getting ready for bed" durations, and still be visibly glowing in the pre-dawn gloom, when Tactical Baby comes calling. Daylight exposure for just a few minutes makes them light up visibly even in lit environments, thanks broken ozone layer! UVPaqLite suggest that they would still be visible as markers even after 4 days of cave-darkness. These are super cool, and I think I will be adding more to my collection as soon as budget allows, great gift ideas are forming ...

300 posts! Tonight we dine in THE BUNKER!

Hi all, I just noticed that yesterday was my 300th post, and I wanted to drop a quite post in here whilst I am compiling to say thank you to all my readers, commentors, vendors who send me cool things, friends and family who let me test things on and with them, train with me and generally support me in my quest to be Apocalypse Equipped!

In the almost three years of doing this blog I have had the good fortune to make a bunch of great connections, friends and learn a whole lot.

If anyone out there wants to join me in my adventures, guestwriter-spot, try some of my gear and ideas out, drop me a line and we'll make something happen!

Events: Tough Mudder #3 September 14th

Last weekend I participated in my third Tough Mudder challenge. Previously I reported on what I wore on my first and then subsequently, for the Stampede and then earlier this year, my second Tough Mudder. I see the Tough Mudder challenges as more than just an Endurance Sport event, but as a training and testing opportunity for me. Training myself to overcome obstacles, and go the distance, but also in anticipating the hardships my team-mates will face, and either preventing or mitigating them.


The Tough Mudder Pledge is a good starting point for this:

• As A Tough Mudder, I Pledge That ....
• I Understand That Tough Mudder Is Not A Race But A Challenge.
• I Put Teamwork And Camaraderie Before My Course Time.
• I Do Not Whine, Kids Whine.
• I Help My Fellow Mudders Complete the Course.
• I Overcome All Fears.

My team mates did not feel up to running the length of the course, which is fine, I hate running, but I can, and I have been training to do so. However, the discipline of NOT running, of not leaving a team-mate behind for personal glory, was what it was all about.

Here's the course for this time: MelbourneSpring2013-CourseMap
There were all the old favourites, as well as some new ones.
 One set of Berlin Walls was replaced for forwards sloped walls, giving no purchase to climb over. There was a "Warrior Carry" where team mates had to carry each other for a distance. A couple of different "over and under" climbs and my favourite, the Cage Crawl, where you had to navigate a long caged-in, water filled trench.

I took my iPhone along, in its SLXtreme waterproof case which unfortunately suffered a non-spectacular failure, with one of the hinge-caps breaking off, causing it to leak. This took my phone offline for a couple of days (rice in a take-away-tub, by a heater recovered it) but I managed to track half of our progress with it here: 11.84 km run with @RunKeeper.

That was a bit sad, but that's the way these things go. I also trialed a couple of other pieces of kit: I fitted my Contour GPS to my shoulder via the Picatinny adapter and fixed it to an ITS Picatinny-MOLLE adapter which in turn I mounted to my trusty First Spear OAGR vest.

Knowing there would be dark tunnels, I fitted my Princeton Tech Switch MPLS light to my MOLLE on my chest, along with my ill-fated SLXtreme case, and a  glow stick from UVPaqLite. I also tried out my newly-acquired rejected prototype Platatac hydration carrier that I scored from eBay, filled with Gatorade. I'll cover that separately, but it served its purpose adequately. TAD Amphibian shorts and my x-strapped (this held them on, but rubbed me raw) Blackhawk kneepads rounded off my regular load.

I kitted out with my Z-E-R-T patch and call-sign tab, as well as another off-market Platatac prototype admin pouch, which I kept a laminated copy of the course map, and a spare cyalume stick in case my team-mates needed some encouragement in dark places, when all other lights go out.

Lastly I wore my GoST Paleo Barefoot PRONATIV's along with their Lining Socks, which, after a 2km walk from parking to the event, 18km of course, and another 2km back to the car, were amazing.

This time I decided to collect loot, and picked up two discarded hydration packs, one I gave to a team-mate, the other I slung, as well as several "technical shirts" and a bunch of gloves. We'll see if any are salvageable.

I had a really good event, it was lots of fun, cold, wet, dirty fun. I feel that again I have proven to myself that I can not only achieve this kind of goal myself, but can also aid others in doing so too. Orange Headband ahoy!

Wish Lust: GUTS HM1 helmet mount

I stumbled across a very cool Kickstarter project, which marries three of my most favourite things: Helmets, lights and preparedness!

This one comes from a Firefighting crew, rather than my more usual geeky or tacticool sources, and I have to hand it to them, when it comes to getting it done, on very little, our First Responders are often at the pointy end of state and federal budgets. I'm very happy to promote this really cool idea, and hopefully get a very cool looking tool into their hands (and mine). Or rather, our of their heads, and hands, and ONTO their heads!

This is the GUTS HM1 fully adjustable helmet mount for lights and tools, by Kris Nagy, Ed Machen & 3LS

 It is a bolt on bracket, that non-invasively mounts to the side or front, above or below the rim, of standard fire helmets as well as hard-hats, but probably also to bump helmets without rails, or even sporting helmets....



The GUTS HM1 is designed to accommodate AA, AAA or CR-123, sized flashlights, small tools or video cameras. Essentially any item that that range in size from ¼ to 1 ½ inches in diameter. and allows the easy fitting and removal without tools, in the field.The body of the bracket is made from aircraft grade aluminum, with two stainless steel ¼ inch set screws to secure the platform to the helmets front or side brim. The strapping is the really exciting part.

The QuickStrap™ is made from ARA- Shield and fire retardant Hook & Loop both are NFPA rated materials. These are the same NFPA fire retardant materials used in firefighting bunker gear. The rubbery property of ARA-shield® grips and keeps your equipment secure even when it gets wet. The strap anchor point is reversible. This feature allows the user decide the best way for them how to tighten the strap, by pulling up, or downwards, whichever suits the user.

3LS are offering the GUTS HM1 in either "clear" silver or anodized in red or black.  The entire system weighs 70g (2.5oz) so would be no burden to most helmets, especially if you're already used to fitting lights or cameras to your head.

I really hope these guys make their funding goal, and perhaps some of YOU out there can help ...

Review: Tough Hooks

I've been remiss, and failed to give you all a review of some really great kit I've just taken for granted! (That's praise and an apology in one).

I backed the Tough Hook Kickstarter by Tarik Lazri after browsing across it looking for new cool things. Tarik has used his experiences "in the field" to find and fill a gap in the market, for people who wear a lot of gear.

This is a coathanger ... no, really, a coathanger, but one that can take over 65kg of load (150lbs) of hung gear without even sweating. Who in their right mind has that much gear?
 Well, actually a lot of people in a lot of roles might.

I have three of the Tough Hooks, and have swapped them into carry several sets of my own exciting collection, that have till now had makeshift hangers of lumps of wood, and pipe.

First up is my o-yoroi, the Japanese armour I made from 7mm belt leather, on a 16th century pattern. Its a full body set, (kabuto-helmet is off-screen) and without a great deal of floor space at my place, (so much gear) I've needed to hang it. This has been problematic! Until now! The broad shoulders of the Tough Hook both accommodated the shoulder straps, but the flying hooks at the edges of the Tough Hook captured the various extra parts, like the waist band, the thigh plates, wrist and shin guards. These were forever slipping and falling off, every time i picked it up to move it (or don it).

You can see that even under a load, the hanger just hangs! No buckling, swaying or listing. It is a rock solid hanger, even under this bulk (if not weight).

You can also see here that there are various accessories sling over the main hanger hook, and again, this has been a problem in past, but the wide and long neck simply carries it, without struggle or tangle.
The awesome folks at ITS Tactical did a great demonstration of just how much of a load you can put these through, which they posted here: I recommend you check it out for a better idea of how tough these things really are.

How does it manage to take all this load and battle on? Good design and materials.


Starting from a pretty basic 2D design (ignoring the awesome winged hooks at the edges for a moment) Tarik took a leaf from structural engineering books, included an I-beam philosophy. This massively increases the bending and shearing stresses, with the flanges adding a real buffer to what ever is being stowed on it, as an added side note.

This translates to less compression for those padded shoulders and spreads out the weight over stitches or seams that might be under it.

My second Tough Hook  bears up smashingly under my small collection of ring-mail for when I need to let off some steam but also carries my spurs, and other boot-type accessories. Again, this is a pretty heavy standing load, and again, makes for a great display.

You can see more clearly how the wings snag and retain gear, and are mirrored, such that no matter how the hook is oriented (hook up or handle up) your gear is held fast.

Handle side? oh yes!

As well as a traditional coat-hanger hook, the Tough Hook features
a built in handle grip for easily transporting your gear! This features ergonomic finger grips as well as plenty of clearance for even the meatiest of gloved hands.

Made of a GP22 high impact ABS plastic, the Tough Hook site suggests that whilst designed for a 55kg (120lbs) load, they have had (informal) tests of up to 90 kg (200lbs), that is a whole lot of gear.

So, Samurai and silly Medieval-esque armour aside .... Who else might use it?

There are loads of people who as part of work or play have heavy, bulky kit.

I've done S.CU.B.A. diving, and can tell you, BDC, regulators, wetsuit, goggles, and fins are big heavy and bulky.

Firefighters, with their heavy jackets, pants, gloves and other kit, including breathing gear, especially when wet.

Then there is the tactical gear for LEO or Military users (or like me, enthusiasts): plate carriers, load bearing vests, battle belts, drop legs, slings, all that kit. All fits perfectly on the Tough Hook, as you can see here on my black one.


The last thing I felt I needed to say, is that the hook and handle can be swapped from one to the other, rotating around to go from "hanging" to "carrying" without dropping your items, because of those winks on the edges of the Tough Hook.

If you have heavy loads to hang up, be they work or play related, I really suggest you look these up, they are fully worth the investment, all but indestructible and ready for anything!

Review: Jil Lite - Jenyx UV torch

My friend Tay from Hornest tipped me off that he was getting a new light from Jil Lite coming into his shop, and being the luxophile that I am I jumped at the opportunity to pick one up. The reason I was so keen on this particular one, was that it was a UV emitter.

I have a UV laser pointer (from LazerShirts.com) which is pretty damn cool, but there are times when having a wide spread of UV light can be very useful for identifying a variety of materials as well as spotting scorpions, hidden UV ink messages and giving a low-impact tracking tool if you have the right markers... More on that later.

The Jenyx UV light from Jil Lite features a 2-chip controlled LED emitter producing 80 Lumens at 400nm. The light is powered by a single AA battery, and has a reported burn-time of 3 hours, with a constant brightness control circuit built in to ensure a steady beam.

The light distribution is quite good, with a room filling "orange-peel" aluminium reflector, behind the B270 optical glass AR coated on both sides lens. The entire unit is housed ay 6061 aircraft aluminium, giving a very sturdy little package. Activation is by tail-cap clicky button, which is inset below the butt-end of the housing, with a lanyard hole built in. Water resistance is achieved with o-rings, but the model is not dive-rated.I like the removable steel pocket clip as well, always good to have that as option.

 I was able to take some pictures with my iPhone  and was very happy with the intensity and reach of the light, illuminating my rather staggering NERF collection, as well as the "Toxic Green" handles of my KA-BAR Zombie Killer knives . UV lights are also very powerful chargers of glow-in-the-dark items such as Ranger Eyes and my SAR Moon Glow disk. It also picked out the green paracord that shipped with my Fishbones and Piranhas  as well as the orange paracord I use as well.

UV ink such as found in highlighters, or in anti-counterfeiting can act as a tracking or messaging system. UV reactive paracord or even NERF darts can act as inexpensive "breadcrumbs" to mark a trail, an alternative to IR or other "your-eyes-only" methods.

This is a cool little torch, and I'm enjoying having it on hand to charge my glowies, and to spot new UV reactive materials I come across in my adventures.

Update: WTF mini wrench and pry bar

A little while ago I reported on my pre-release WTF Ti mini-pry bar that I managed to sweet talk Brad of TacticalKeyChains into sending me, as it was a second. Just recently my full order from the Kickstarter campaign arrived, and thought I should show off the pre-production version against the production models.

 I ordered both titanium and the chromium/molybdenum  chromoly 4130 steel "stealth" version which has been Parkerized for shine and corrosion resistance. The main physical difference between the Ti and chromoly is the machining, in that the face of the pry-edge of the Ti versions is textured from the machining, where as the chromoly  version is smooth finished, due to the requirements for working the different metals. I like them both, and have had no discernible difference in performance when prying, they both bite nicely.

I had the production WTF anodized to a rose-gold colour, as it was going to be a gift for Omega (which she put straight onto her key chain, along with her NuKo Tool TiGBi Skully ). The only real difference between the the production version of the Ti WTF, and my "seconds" version is the lanyard hole is not quite centered in the second. In theory this might weaken that end, but I can't imagine putting enough force on the lanyard hole to make that an issue.

The Ti WTF's (made of Ti-6Al-4V) weigh 7.8g and the Stealth WTF (made of AISI 4130) weighs more at 11.5 grams, which is a small price to pay considering the benefits.

Brad has kindly provided some metallurgical stats on the materials he uses for the WTF's. The Ti-6Al-4V - has an Ultimate Tensile Strength of 138,000 psi and an elasticity modulus of 16,500 ksi, which means it is very very resilient, and springy. It will flex under stress.
TheChromoly 4130 has a Ultimate Tensile Strength - 97,200 psi but has an elasticity modulus of 29,700 ksi meaning it is not quite as resilient but VERY stiff.
Compare that against the aluminium 6061-T6 used for the basic WTF's which has an Ultimate Tensile Strength of only 45,000 psi and an elasticity modulus of 10,000 ksi  which is to say, relatively soft.

The cromoly WTF has the advantage of being ferromagnetic, and the wrench bits will not "give" when working stubborn nuts.  I really like my WTF's, i wear the golden "second" around my neck as a part of my EDC, and the chromoly version has found a place in my ZuluNylonGear CAOS admin pouch. These are brilliant little tools, and I'm glad I made the investment.