Review: Go! Outfitters - Landing Pad

A well made tarp is a crucial bit of kit that every outdoors expedition could benefit from, be it rain or wind shelter, shade or just a dry and prickle free place o picnic upon. Though at times a 9  x 12 tarp may be a bit too much, especially if you're just planning for a bit of a trail hike. Then there is your gear, be it packs, cook gear, bedding or even boots at the end of a long day. If like me you prefer a slung hammock to a ground tent there is the question of what to do with your gear, if whatever fly system you have doesn't cover it. The clever people at GO! Outfitters came up with something to fit that niche, the Landing Pad.   

It’s made from durable 70D polyester, with a 1000mm waterproof polyurethane coating on the bottom and a silicone coating on the top for extra protection and easy clean up. This makes the Landing Pad extremely waterproof. 

 The Landing Pad is 137cm (54") in diameter and has eight stake loops and four sets of drawstrings with cord locks around its outer edge. It comes with a set of steel hook-style tent stakes in a draw string bag to stake it down as needed. At 137cm in diameter, the circle is big enough that 4 people could sit on it back to back or three facing inwards, if legs can be managed. Certainly big enough for a trail-side picnic or to drop bags and boots on whilst hopping into your hammock. Stake it down under your hammock for a soft place to step onto once you swing your legs over but before you put your boots on. 

The four drawstrings around the edge of the Landing Pad allow for the lips to be drawn up into a low bathtub to keep damp ground run-off out. It also allows for the whole circle be drawn up like a purse to wrap your gear in a highly water proof bag. Obviously the opening isn't covered, so don't be throwing it in a pool or leaving it under a waterfall. By pulling two opposing drawstrings the landing Pad converts into a gear hammock,  stretching 2.4m (7'10") overall with a 1m (3') hammock space. Though it can be drawn tighter doing so reduces the capacity. I would use it as an along-side sling, rather than bunk-style to keep things in reaching distance and act as a buffer.

 This drawstring rim also enables the Landing Pad to be fitted over a backpack to shelter it from the weather and could supplement a poncho to keep both you AND your gear dry.  I found it big enough to be able to wear it like a turtle-back poncho, covering my back, butt arms and back. Its even big enough that I could shelter under it like an umbrella when couched, staying totally covered. 

I found that the tan/brown material made for quite the unobtrusive "hide" when crouched down under it when just off-trail. It occurs to me that with an expanded hiking stick or appropriately padded branch you could make a small single pole shelter with the Landing  Pad, properly staked out.The Landing Pad, with stakes and stuff-sack weighs 285g (10oz) and by itself 15g (5.3oz) and packs down to a pocket sized 4cm X 13cm X 18cm (1.5" X 5" X 7").

More than compact enough to stuff in a pocket or day-pack when going for a hike to provide a clean dry spot to break on. I have two  ( one brown one charcoal grey) and they make for an easy addition to any adventure without adding excessive gear load.

Review: Great Outdoors Silver Grande 9L tent

Having an ultralight bivy tent is all good and well for a bit of  a solo over-nighter off the trail when ounces mean pounds, but there is also a time and a place for a big tent that will fit the whole family, and gear. Sometimes you need to go big, and one such biggness is the Great Outdoors Silver Grande 9L a four room, 9 person tent.We jokingly refer to this beast as the Tent Mahal. All told this huge tent weighs 29.7Kg (65.5 lbs) so its definitely more suited to back yard or drive-in camp sites, though i have carted it in to a couple of sites in a trolley and/or hand wagon. 

This rather palatial tent with measures 6.4m (21') in overall length (2.1 x 2.2 x 2.1) and 3m (10') wide in the middle, 2.15m at the end rooms. The front room adds another 2.1m to the width to a total of 4.3m (14'). The side rooms are a little bit shorter than the main central room, which tops out at a very respectable 2m15m (7') tall enough for me to stand and stretch in nay room, quite a luxury. Each room has a door out wide zippering allows for good clearance around the bathtub bottom of the tent. The three off-rooms all open onto the central room with a low-trip edge of similar width as the external doors for ease of access. 

The internal doors are made of the same lightweight and breathable fabric as the inner walls of the tent, and self-stow in fabric pockets beside each door.  Each outside door features a flyscreen outer, with the opaque option as an in-set. these all wrap up with their self-storing toggle and loop attachments. The interior is really very spacious and airy. The walls are at a high angle, so you maximize the available space, which is often lost in lower dome tents. The internal walls are all a very light, breathable material, and well fitted. 

Each of the off-rooms have window panels on the sides which can be rolled up to add airflow and views. Structure is provided by two sets of colour coded fiber-glass poles, and each is designed to slot into sleeves built into the inner shell, and mount on captive pegs attached to split rings, attached to the base, in the corners of the main room. These also have clip-on stays to keep the inner walls taut. The off-rooms each have a similar system, forming an arch over the external doorway. Plenty of peg-loops around the edges provides for a well pegged-down base. 

Each room features clips in the corners to suspend a light or string a clothes line to air out what have you. The main room has two "window" panels in the roof and the fly has two clear PVC panels corresponding for light and ventilation. The windows throughout make for a very well lit and comfortable home away from home. 

The main room has two zippered ports in the bathtub floor wall to feed power or other cables in without exposing yourself to too many bugs and critters. Perfect if you have a powered site, a generator or the like. You might even feed an LPG hose to a cooker if in-tent cooking was your thing, though I wouldn't recommend it myself. There are also two sets of four mesh pocket sewn into the main room walls for all manner of small items; phones, sunglasses, tissues, spare socks, gloves, caps. This little touch helps organize personal effects that might otherwise vanish until pack-up time. (I once "lost" a wallet, went as far as cancelling all my cards only to find it under the tent when we packed up). The fly is silvered on the inside which adds significant protection from the sun, and radiant heat, and as previously mentioned has clear PVC panels matching the windows on the sides and top of the inner layer. 

The zippers are set under a lip for rain shedding and have a reflective cord loop for easy pulling at night. Numerous guy-lines are built in to strategic locations and the ground- reaching corners feature a heavy-duty shock-cord loops for pegging it down. The "front door" has a door-matt built in, perfect for keeping muddy feet out of your nice clean tent. The fly features a pop-out pavilion with two poles to form an annex that is billed as being able to join up with the back-cabin of a truck or van, for even more enclosed space, though i haven't had the ability to try that out. I have managed to set the whole thing up on my own, under good conditions, but it's easier with help. I have set the fly up the wrong way around several times, prompting me to write on the corners of the fly and tent ("tab A, slot B" type notes for next time I set it up. The tent nominally fits in a light nylon carry bag, with carry and drag straps, and a wheeled base, but I have had great trouble re-packing it every time. 

After use, I like to lay the fly out to dry, ( and the inner, too,inverted if possible) if space and time allows to have it dry for pack-down. In summary this is a great tent, spacious, roomy and airy, but its very large and heavy. With all the pegs in place, and well guy-lined down, the chain-of-domes structure is very stable in even quite high winds, and in the light rains I've had it up in we've had no leakage or seepage problems. Given its capacity, it could even do as a short to medium term bug-out home, once a suitable location has been scouted, whilst more permanent habitations are established. This was a second hand gift from a festival going friend of ours, and i probably wouldn't have bought one as large on my own. Looks like its no longer on the market, but if you have the need for a big tent, something like this would suit you well.

Review: ChinLin spade trowel

NOTE: rebranded but looks the same here: https://www.aussiestormshop.com.au/clearance-mini-hand-shovel-trowel-with-7-functions

Whether it's putting in crops, digging up a secret-squirrel cache, taking care of some business in a back-woods latrine or just some old fashioned fox-hole digging, having  a good digging tool comes in very handy and saves the old fingernails. I have a couple of folding entrenching tools in my camping/bug out kits, but even compact as they are, they can add a bit of bulk and weight. Sometimes they're even a bit too much tool for the job. A full-sized e-tool will make a big Dakota-fire hole, where a trowel sized tool would be more economical. I love multi-function tools, especially when they don't add function at the expense of the primary function. 

This little beauty is the ChinLin HW-901 spade and I originally picked a couple up on Wish.com but it looks like they are no longer sold there. I did find them on this Indonesian clone ( buyer beware). What it is is a 26.3cm ( 10 1/3") trowel with a para-cord wrapped box handle. Made from a  single piece of 420 Stainless steel, the handle has been welded along the middle of the upper face, obscured by the cord wrap. The trowel has a sharpened edge around 3/4 of its edge, with the final quarter being a serrated saw-edge. The spoon face of the tool has a nail puller cut in as well as a set of four hex-head wrench cut-outs. 

The edges aren't super-sharp but they're sturdy enough to chop with, which will be good for clearing brush, weeds or stubborn roots whilst digging. Weighing in at only 80g (2.8oz) it's not going to cut it as an axe, but it makes for a lively and light digging tool. The sharp edges and serrations do make digging through turf easy, and the tool-cut-outs don't effect digging and scooping output significantly.

There is a 7cm ruler printed on the inside of the spoon which is  a nice addition. The pressed steel has a spine ridge pressed in for stability and the tool is very stiff, which makes it very good when sawing or prying (splitting cracked wood or perhaps stone), especially handy when pulling nails with the nail puller or applying torque with the hex wrench holes. 

The cord-wrap is made of 290cm (9'6") of paracord, secured to the handle through four sets of holes drilled into the sides of the handle, and terminating in a lanyard loop at the bottom end. The handle has a slight taper which keeps the cord from sliding off either ends. 

Those side lashing holes and the hole in the spine of the spoon near the handle of the tool can also act as attachment points to fix a pole fitted into the hollow handle, either acting as a extension to the handle, or to turn the tool into a spear. 

The tool comes in a hand if pretty flimsy nylon pouch with a belt loop. I've found it very useful to have on hand when picnicking or hiking. The pouch keeps the sharp edges secure. 

I bought one for myself as a tactical hand shovel, and another for my veggie-garden planting partner. We've both put it to  good use and they've never failed us. 

Panjang Handle: 10.4 cm

Review: Stilletto titanium nail puller

I do love a  good salvage. Whether it be road-side junk-swap, flea market bargain or dump-harvest the idea of junk salvage strikes a deep chord in me from both a 

post-apocalypse survivor point of view  and 80's kids sci-fi. That said, sometimes having the right tool for the job, especially if you're working with aged or non standard materials. I do like to recycle timber, for garden-beds and storage shelf construction, and getting the nails out can sometimes be a real pain, especially in well seasoned hardwood pallets.  

Previously I have made do with my pair of  demolition hammers (the Dead-On Annihilator and the Stanley Fat-MAX FUBAR) which are brute force tools, even when paired with pry tools such as Jimmy and the ever rugged Breacher bar. I've had a lot of success with this combination of tools but they're inelegant. I'm also a sucker for titanium. I know its not a miracle metal, neither mithril nor vibranium/ adamantium but its pretty rad.

Now on to the tool!

This is the original Stiletto Titanium framing nail puller with the Patented nail removal feature! In essence it is a 30.48cm ( 11.5") pry bar, made of one piece of titanium. It has an open-truss design to cut weight but retain rigidity, weighing in at 300g (8.5 Oz)

One end features a standard cloven hoof pry edge, which is quite pointy, for aggressive purchase finding, and the other end its a cat's paw, 90 degree pry bar, with a similarly pointy tined  cloven end, and a smooth, rounded fulcrum for mark-free nail-pulling. The key feature of the cats-paw end is the perpendicular dimpler. This open-ended conical protrusion is used to punch a circular indentation into the wood,below the level of the head of the nail, in order to allow either of the pry ends to find purchase and pull them out. This is achieved by centering the open end of the dimpler around the had of the nail and striking the back face with a hammer, hard enough to drive a dimple into the wood around the nail-head. 

The dimpler has an internal diameter of 1cm (0.4") which should be plenty big enough for common nails found in timber. Stiletto specifically state it be used for "common nails" only

 

The divot allows the tines of the nail pullers to be worked under the nail-head without gouging the wood too much ( divot aside). I found that for especially stubborn or embedded nails ( or punched down, or otherwise deep) that the tines can be driven in by hammering in the tool from the other end. It should be worth noting that Stilleto claim the titanium strike faces outlast steel bars 3X longer - doesn't spall, crack & mushroom like steel bars. I also use the back face of the cats-paw to drive some nails, and though it took some transfer marks, the satin matte finish was un-marred. It's a bit light to act as a hammer effectively but in a pinch, just fine. 

The open truss body is clean edged and smooth to the hand, allowing a strong grip be taken without roughing up your hand.

The shaft of the tool is slim enough to be threaded through PALS/MOLLE channels, for belt, pack or carrier  carry, but I wnt through my leather scraps bag and whipped up a quick holster with a belt loop for my use. I look forward to easy break-down of pallets and furniture for firewood or lumber needs.

Its a great tool, multi-functional, rugged and fit for purpose. 

Review: Gobi Gear - SegSac Stuff Sack

 

Sometimes you just need to keep your gear in good order so you can ensure all the pieces you need make it from base camp to your destination and set up with  everything you need (or might need). Sometimes just jamming everything into a  bag will do but other times, some segregation really comes in handy. Initially backed on Kickstarter. but now in full production!

The innovators of Gobi Gear have come up with a solution to this need in the SegSac.Constructed of the super light, yet durable, water-resistant, rip-stop woven, 30D Cordura fabric.   Four internal compartments, sewn into the main tube, in the form of  an X shaped addition, sewn into the outside and all the way to the bottom. 

This keeps gear internally separated, yet still in one place for easy and quick access to what you need. Being sewn to the bottom means that items will not slide around and jump compartments.

The upper edge of the outer-tube body is laced with a draw-string with a cord-lock, which not only acts to secure contents but when fully open, also acts to stabilize the opening to prevent it collapsing under its own weight.

The SegSac is fitted with four compression straps to cinch it down to optimal packing size but it also provides carry handles and lashing points. The straps are fitted with clips  for ease of opening when under tension.  The base of the SegSac also features a sew in loop of nylon fabric to act as a carry handle. 

The compression straps terminate on a cap of the same nylon the SegSac body is made of and features a neck to cover the sides when compressed, adding to the security and protection of the water-resistant material. The SegSac is available in two sizes: 15 liter capacity and 20 liter capacity.

 used the SegSac in two ways: Firstly to pack clothes, and a towel ( using the segments to pack dirty/damp clothes away as they accumulate). I can fit 4 pair of socks, 4 t-shirts, a pair of pants and a mid-sized towel in it. The second thing I use it for is to stow hammock slinging straps and accessories, with 4 x 5m lengths of heavy webbing, 2x anti-theft laptop security cables (which when knotted  make very strong and abrasion resistant straps to hang from) and assorted other straps. 

NOTE: Water resistant only:  This SegSac is NOT a dry bag, but water will conveniently bead off it should it get sprayed or drizzled on.. Nor is it a heavy duty item, though it is well put together. Its most suitable for storing things inside your main pack, for ease of packing and organisation. Keep your socks and jocks clean and dry till you need them.

 

 

 

 

Review : Aerial A1 suspended tent

Its no secret that I'm a fan of hammocks and if I had my way I'd never sleep on the ground, but the inevitable sag can lead to a banana shaped sleep which some can't abide.
 Options like the fabulous and fun Tensile tents provide a flat space but need three anchor points, and more traditional hammock systems like the Sierra Madre Nube are comfortable but don't resolve the sag issue. A very exciting and innovative option is the Aerial A1 by Opeongo which I backed on Kickstarter. After the usual development and manufacturing delays, I was delighted by the end product. 

The principle of  the A1 is to form a semi-rigid cot, by stretching the four corners taut via a pair of webbing loops that are strung around appropriate supports, tree trunks or beams. This forms the base ontop of which the tent component is built. Each short end is held rigid with the inclusion of a spreader bar.
A single 7000 series aluminium pole with spreader-bar held in place with clever clasps suspend the internal mesh body and give it near vertical side-walls. The base features a bath-tub bottom and is made of 210 Denier, ripstop nylon (PU 4000) and the mesh walls features full size zippered openings on both sides.

The main feature that allows the A1 to achieve its exceptional comfort and stability is the unique, slackline inspired, suspension system. By wrapping high tensile webbing straps around a tree and pulling them back from both sides of the trunk the A1 is able to achieve a four point connection system. Using this four point system, along with tension and two spreader bars at the head and feet of the base it is able to create a sturdy, flat platform that feels similar to a high quality cot. The webbing suspension (PES (Polyester) rated to  14kN /1450 kg (3200Lbs)) also provides spring like a mattress that helps absorb movement without being tippy or bouncy. 

This flat sleeping surface provides the ability to sleep in any position, back, side or even on your front.The secret to the suspension tension is the buckle system. The AustriAlpine are rated to  15kn / 1528kg (3370lbs) and are made from ultra lightweight alloy. The system works by having a simple self-locking dual-buckle at one end's corners. This lets you set up one of the webbing straps  (6m (19'8") or 8m (26'3")) straps at one end, as a static length. The dynamic end features a pair of off-set buckles. 

This enables you to take advantage of the RollerCam fitting to tension the whole system up. To do so simply feed the webbing through the first off-set buckle on the A1 and then back to the Rollercam returning back to the second off-set buckle on the A1. This simple system 3:1 purchase creates a 4:1 mechanical advantage which is more than sufficient to create a nice taut, flat surface. Each of the webbing straps has a boldly embroidered + mark in its center to assist on centering the straps which was a nice touch. 
The removable fly is lightweight, durable, made from a  premium 40 Denier nylon and has a 1500mm hydrostatic head waterproof rating. 

The fly is completely separated from the internal mesh body by the spreader bar and main ridgepole, which  prevents condensation build up, promotes good airflow and prevents contact weeping.  The base has  a footprint of 203cm x 69cm / (80” x 27”), which is plenty big enough for me to stretch out on, even when Tactical Baby joins me. It is also no coincidence that the footprint matches a large Therm-a-Rest® mattress, which would be great insulation, let alone padding, but I found the cot-like finish very comfortable on its own. The fly open on either side or can be stretched open to form 17” vestibules. guy-lines and Y-shaped stakes are included to stake out the vestibule. The clever design of the A1 also allows for it to be used as an on-ground tent, with four Shepherd Hook stakes to stake out each corner. Its peak height is 90cm (35”), which is plenty high enough to sit up in.
Inside the tent there are three well placed pockets to hold all your needfuls. Two medium size pockets on either end and one 'sky" pocket in the ceiling that is the perfect place for putting your head lamp to light up the tent at night, or an iPad to watch a movie. None of these pockets are heavy duty, and the outside attachment points work better for hanging a bottle, or your boots but for glasses, a flashlight or devices, they work perfectly. 

The system as a whole, packed down measures  67cm x 13cm (28” x 5”) in its slingable stuff case and weighs 2.70kg (5lbs 15oz) for the full system, or cut down to 2.45kg / (5lbs 6oz) for a slung trail set, or 1.86kg (4lbs 1oz) for a ground-based set up. Leaving out the stakes, straps and roller-cams cuts weight, crucial when ounces mean pounds. 
 This shelter is very easy to set up and only takes about 6 minutes. (once you get the suspension buckles sorted out. )The A1 makers state it will be stable on trees with a diameter as small as 5”, though they recommend using healthy trees with a 7” - 25” trunk. I set it up on painted 5"x5" beams with no trouble. The standard webbing provided allows the tent to be set up between two trees spaced 10’ - 25’ feet apart. For trees spaced 10’ - 16’ apart the webbing will completely encircle the tree for maximum hold. I recommend using the long webbing lengths at the Roller-cam side, for maximum cinching length. 

The A1 has a suspended capacity of 200kg (440lbs) so you probably wouldn't store your gear in there with you, but OpeonGo offer an under-slung gear hammock to keep up to 27kg (60lbs) of things off the ground, yet easy to reach (it doubles as a vestibule ground mat in the un-suspended set-up). They also recommend not setting the A1 up any higher than waist high, for ease of entry and safety. A good rule of thumb is never to sling a hammock higher than you're willing to fall. The 5" high tub walls of the base provide a good support in the event of leaning or rollovers in the night. I've found it to be very stable, even in high winds and with the fly staked/ pegged down, very rain resistant. 

The Aerial A1 can also  be pared with the A1 Underquilt to provide maximum warmth for winter camping.

This is a great system, light, comfortable and versatile. I'd highly recommend them to anyone looking for an off-ground option. Outstanding design and top notch engineering.

 

Review: gear crates

I reorganized my camping/ bug-out gear recently, utilizing some pack-flat crates I salvaged from a big-name supermarket, dumpster, which use them for shipping fresh produce.  When expanded the crates measure 38cm x 58.5cm x 25.5cm (15" x 23" x 10"). When not in use they fold flat to the same footprint but only an inch thick. They are stack-able and light, with good drainage, in case of spills or exposure. Carry handles built into both the long and short ends for ease of transport. 

I find that the wider footprint allow for greater versatility than that offered by the humble Tactical Milk Crate. Whilst I still use Tactical Crates for a number of storage and organisational purposes, these four pre-packed crates form the core of my camping/ bug-out gear. I'll go through what i keep in them each, though many of the items I've previously covered. 

1) sleep systems

2) shelter systems

3) cooking systems

4) emergency systems

Crate One: sleep systems

Sleep systems: 

This crate starts off with a couple of hammock systems, both with ridgelines and bug nets, but without a tarp over-layer. one is the very fine 
Go!-outfitters-hammock and the second is the very capable One-Wind zippable which I've yet to review fully. 

I also have a pair of old style Aurora Wanderer sleeping bags which are rated to 0oC and zip together to form a double sleeping bag for cozy couple sleeping or extra room. 

In lieu of a pillow I have the very comfortable, snuggly wearable go! outfitters stratus hood-hammock-pillow. Also in this crate I have a folded up plasaticised fabric shower curtain to act as an impromptu rain fly or ground sheet, good for keeping kit and kith dry and warm. That red-capped bottle is a liquid fire gel that belonged in crate three.

Shelter systems:

This is a mix of tarps, straps and hammock systems.

Crate two: shelter systems

The multi-function Treelo system which can function as tarp, hammock or ground sheet. 

Another component item is the Sierra Madre Pares hammock that couples with the Nube shelter system to make a fairly complete shelter right there. In addition the Nube Winter barrier system adds a windbreak option for that system for additional warmth retention ( it's in the fourth crate).

Adding to the number of beds available Eagles Nest Outfitters hammock which makes a nice addition for very little space or weight needed.

There's also a very simple wish.com flyscreen equipped hammock, to add further bedding option. 

Crate two :shelter systems

There's also a couple of the very handy Go! Outfitters Landing pads which can act as personal rain-shelter, for you or your gear, as well as a ground-sheet under your hammock to help keep from dragging crud into your hammock.

The grey and blue sack is the Gobi Gear SegSac which is an internally segmented stuff sack, I have loaded up with webbing straps, cordage and all kinds of tarp or hammock slinging.

Included in this crate is my beloved  Boker+ Tomahook for all the right camp-making reasons, and the all important and often overlooked entrenching tool. This is an old Australian Army issued one I found in a park and restored. I especially like the pick end, for help in hard terrain. 

I could reorganize the two crates to pair up systems together but they pack nicely this way.

Cooking and fire systems

Cooking and Fire systems:

In my fire-crate are a number of items for both fire and lighting as well as some cookware. 

First up is the thermo-electric power-generating PowerPot which couples high tech power generation with cooking potential. 

Following up is the BioLite thermo-electric stove which does double duty as a fan-driven stove for good clean combustion as well as a power source for charging batteries or driving devices.

Also included are a selection of skillets and cast iron pans, and enamelware plates, bowls and mugs, for obvious reasons. There is also a nesting mess kit of mug and bowl. I have a Caribee folding butane burner and a bottle of butane for fuel. A collection of candles: pillar, tea-light and long burning votive-in-a-can. These can act as illumination, fuel or fire-lighters 

Matches, a cutting board, tongs and wooden spoon just make sense, as does another little hatchet for kindling and fire-needs.

Crate three: cooking and fire systems

As well a couple of space blankets for good measure, I have a couple of repurposed tin cans with wire loop handles for additional cooking / water boiling or candle-holders. 

Emergency Systems:

A bit of a misnomer perhaps as this is a catch-all crate, but it does contain some just-in-case items. 

First up is the Go! Outfitters Apex which is a tarp to pair with the hammock in the Sleep crate. It'd work well on its own or paired with another hammock just as well. It's design with a built in ridge-line makes it a quick-deploy shelter system that covers a wide area.

The Nubé Floor is an accessory that provides the ability to set up the Nubé as a ground shelter, without trees, but not with the hammock, obviously. The Nubé Winter Barrier acts as a weather barrier, cutting wind, rain and snow and can be set up both at ground or suspended as part of a tarp/hammock system. 

emergency systems

Next up in the emergency crate is the Sea to Summit kitchen sink which does double duty as washing up sink and portable bucket. Coupled with this is the just jiggle it siphon hose which can be used to get water out of hard to reach places, or even fuel if needs be. 

I also have a small air mattress, a microfiber towel and another small ground mat. bundles of paracord, a spool of fishing line and more webbing, as well as a couple of hammock accessories for gear storage. I also have a space blanket emergency shelter kit which features a triangular tube of space blanket mylar and a set of ridgelines and pegs for a complete in-a-pinch shelter system.

I also have a wind-up flashlight and multi function wind-up emergency radio, which has a siren, flashing lights as well as an AM/FM radio for emergency updates. it also has a headphone jack for sound discipline or power conservation. It also has a USB input for all your podcast needs. A generic First Aid kit rounds off the crate.

Crate four: emergency systems

These crates are far from complete or final, but they act as a quick go-to system that I can grab and go with, forming a core of items needed for a camping expedition or emergency get-away.  I typically supplement it with Tactical Crates filled with canned goods and other consumables, as well as other bulkier items like tents, cots and the like. Some items also get put to use and need to be remembered. 

My entrenching tool is currently in service in our vegetable garden.

Review: Alton Goods bathtub groundsheet

 Sometimes its the little things that can turn a good experience into a great one, or an bearable one into a bearable one. Like turning cold and wet into warm and dry. One such item is the Alton Goods bathtub groundsheet. I'm normally a fan of hammock sleeping to keep me off the ground, but its not always an option or practical. Having a lightweight, waterproof groundsheet can offer you the protection from wet ground, mud and sticks, to provide a comfortable and pleasant platform to set up on. Or a dry spot to have a stretch-out on damp grass. 

I received my groundsheet as a birthday present, in winter, and took it on a number of walks, where its small packed size of  21.5x8x11cm (8.5"x 3.25"x 4") and light weight 295g (10.4 oz) made it an inconsequential daypack or cargo pocket addition.

Made from a tough Ripstop nylon construction, dual-coated with 3000mm Silicone and PU, it is fully seam-sealed with heat tape to be both 100% waterproof and puncture resistant. When staked out the Bathtub Groundsheet measures : 210x90x15cm (6'11"x2'11" x 6"), plenty big enough to fit me, and my gear, and the bathtub wall height is plenty big enough to keep my bedding in, or incidental wet out. 

The corners are heavily reinforced and tailored to stand upright without stressing the seams and feature tape reinforcement to hold upright without sagging. This is bolstered further by built-in metal posts in the corners to hold it up, as well as sewn in buttressing peg-out loops extending outwards. the top edge of the corners also feature a loop sewn in to fit fly poles if used, and sewn in snap-points allow the groundsheet to marry up with the compatible Ultralight Ground Bug Net to create a fully-enclosed sleep system by pairing with this groundsheet. Nice forethought. 

The included 4 Y cross-sectioned 7001 aluminium pegs have retention notches and a built in pull-cord for ease of removal.

When fully staked out and pulled taught, the bathtub effect is very stable, and provides a good barrier against the outside. the ripstop nylon is smooth and whilst not breathable, very comfortable to lay on directly, even after being in full sun. 

I liked that it was big enough for me to fully stretch out on, as i'm quite tall. i'd want a tarp strung up over it to sleep on, just to give some cover, and I suspect leaving the most down-hill corner flat to allow any water a drain-off spot might be prudent without one. 

I've woken up in a pool of water once whilst camping and don't recommend it. 

The whole system comes with own drawstring bag for ease of carry and is small and light enough to be stuffed in a cargo pocket. I have been keeping it in my car along with some light picnic hiking gear and have used it as a picnic blanket a number of times. I think i'll be picking up the bug net and one of the Alton goods tarps to complete the set, and will test it out for sure.