Review: Mystery Ranch - Removable Stick-it

I got in touch with my mate Tay Choon Mong at Hornest Singapore, my favourite stockist of the hardy and heavy-duty Mystery Ranch packs and products, after I saw that they had some accessories I had been hanging out for come in. You may recall I have one of the rare Mystery ranch "Asia Pacific only" 1 Day Assault Pack bags, which is a cross between the more mature 3 Day Assault Pack and the more recently released ASAP Pack.

I also have one of the Cinch straps, for comfortable wear and quick release of a pack whilst wearing a loaded plate carrier.

Great kit. The particular accessory that had come to my attention was the Removable Stick-It flap, seen here in Coyote, mounted to my black 1DAP. The Stick-It is a detachable beaver-tail that mounts to the bottom of a compatible pack to offer external storage when you've either gotten too much stuff, or just something too big for your pack to carry.

Built with 500D Cordura for long-haul durability, which I've come to expect from pack-makers, and fitted with mil-spec 1" webbing straps, Mystery Ranch have gone all out on the both the construction and the hardware. The buckles have a clip-in end, for fixing to MOLLE loops or other webbing on your pack, as well as a spring loaded friction lock for the working end of the buckle.

This kind of attention to detail as well as using better-than-standard fittings is something I love about Mystery Ranch. You pay for it, but it's worth it. The Stick-It attaches to its host pack with four press-stud closing loops of webbing, which feed back into the accessory by extra loops of MOLLE style webbing sewn into the Stick-It's interior. Those press-stud loops allow you to attach it to the bottom of any pack with MOLLE on its base.

I've put it on my Platatac Light Field Pack in place of its "Office" Admin Pack, or in fact as well as it. It also fits the Propper UC Pack, and the old standby the classic Platatac Bullock Echo, though the Echo already has a beaver-tail attachment built in.

The Stick-It has a couple of other interesting features. It is constructed to have expanding baffles in its Center line, in case of very bulky loads, with plastic inserts to stiffen the sides and carry the weight more evenly. You can really fit quite a lot into this, and is is the smaller of the two sizes offered. It also had a set of drainage grommets in its base, for those times you've taken a dip or been caught in a monsoon.

Another very forward thinking feature is the sheer length of the webbing for the attachment straps. This both lets you place the buckles anywhere from right at the back of the pack, to all the way at the front for quick release options of your over-load without shucking the pack propper. They also come with hook-and-loop keeper loops, to bundle the excess webbing up tight and out of the way for snag free utility.

The small Stick-It is perfect for stowing bulky times, like an Ops-Core bump helmet, a bundled jacket like the  Platatac Harry 1.2 Softshell or the like. It can easily cope with even larger items, as long as you're comfortable with the, sitting out over the top of its top lip. The construction is hefty, and I suspect the weakest point would be the clip on the buckle. I've never had any trouble carrying my every-day items, let me know if any of you try lugging a ammo-can with yours.

The Stick-It isn't usually available as a stand alone item, but can be found in the Mystery Ranch Gunfighter pack, or through Hornest.

Review: Dual double mag pouch

Here's another item from my bulk load of pouches and packs like the S10 Haversack that I have been slowly rolling out. I had a windfall of a truckload of army surplus gear ages ago, which have been sitting in the bunker, being musty, but there are some real gems in there. These may not be the cutting edge of high-speed, low-drag gear, but have been mil-spec at some stage, so they're damn tough, if nothing else.

This particular pouch came from a box full of here, and I just reached in and grabbed one at random. You can see it's already had a rough life, but has held together.

This double, dual-magazine carrying set of pouches is made of a high Denier (800-1000 I'd guess, by the feel) and are built into a single backing. From the frayed stitching marks, I'd guess that they originally came with some sort of Fastex style clips to act as the primary closure points for the box-like pouches, but was probably removed to speed things up in the field.

A broad loop-field panel on the front of the outside of the pouch acts as the primary closure as a result, with a corresponding hook-field inside the box-top lid. A tongue of webbing with a hook-field can be pulled out from inside the pouch to mate with the loop-field on the front to neutralize the hook-and-loop closure entirely, which was probably useful when the original Fastex loops were still in place.

Internally, the pouches have been given a polyurethane coating for additional waterproofing, and are double stitched throughout. Drainage grommets with a wire mesh grit filter are found in the bottom of each, this would act to keep the grit and sand out of your magazines, and was a nice little feature.

The inside of the box-lid has a little pocked sewn in, big enough for a MRE packet of waterproof matches, a P-38 can opener or maybe a button compass, I found a couple of match-packets and even a couple of water purification tablets when I went through the pouches.

The back panel of the pouches have several different ways to mount, and also shows the vintage of the pouches. ALICE style brass-wire belt hooks, and no PALS-MOLLE to be seen. A pair of steel rings allows extra strapping to be attached to sling the pouches, though the angle of the two ring mountings being different suggests there is a "right way" to do this. A question for the veterans out there. What gives?

The pouches have been stamped with a NSN, but they are all so aged that I couldn't make out the cage numbers. I'd say these pouches would work well doing double duty in much the same way as any of the Platatac FUP or bigger pouches I've grown to love, but with a far older look.

 

Review: S10 Respirator Haversack

I wanted to go a little old-school for a bit, and cover some canvas era type pouches.


A while ago I covered an Australian issue butt-pack, that I had picked up a number of years ago, and this is along those lines. I managed to score a bulk load of retired stock in the way of pouches and bags, and these respirator haversacks were one of these.

These are British Respirator Haversacks which is NSN listed as 4240 99 800 9601.  They are designed to carry the S10 respirator. I don't have a S10, but do have a full-face 3M 6000 series mask that fits nicely. Whilst I say canvas-era, these are actually a Codrura type nylon, for all the hard-wearing, non mildew and water-shedding goodness modern materials offer.

The bag measures 29 x 26 x11 cms (11" x 10" x 4.5" ) and weighs 475grams. Lacking more modern PALS/MOLLE fittings, the haversack has a couple of different attachment and carry options. A twin-stud openable belt-loop, which also features a wire hanger, from the old ALICE style fittings.

A long nylon strap with a Fastex style buckle allows for a quick waist or shoulder slung carry as well, and there is even a secondary shoestring type cold to further secure the pouch around the waist if shoulder-carried, or around the thigh id hip-carried. The cold can be secured out of the way if not in use, or removed entirely.

One side of the pouch features a hook-and-look pocket, a good size for a survival tin, a GPS unit or other small items you might need in a hurry.

The inside of the haversack is quite spacious, fitting one each of the 1L and 2L Pathopak containers with plenty of room to move. The internal dimension really give you a lot of carry capacity, and the haversack itself it very sturdily put together.

Inside the haversack, as well as the main spacious compartment are several other interesting features.

One hook-and-loop closing front pocket, and two webbing and hook-and-loop holders. These just took the 1L Pathopak's and I expect they are designed to fit additional filter canisters for the S10 respirator.

They would certainly work to fasten and store a number of smallish items, and when not in use, being made up a webbing, will simple squash out 0f the way.

The front pocket has a small hook-and-loop fixture, and features broad pockets sewn in, to fit  NBC combo-pens, morphine syrettes, first aid kit, gloves and the like. They are made of the same material as the rest of the haversack, and whilst if they had been elasticized it would have been good, they probably work just fine in conjunction with the flap.


Even the top of the haversack's lid has some features, as well as the press-stud and hook-and-loop lined lip, there are twin bands of elasticized webbing, to allow you to affix a number of small items like more gloves, a first aid kit or the like.

These may not be flashy and new like a lot of other high-speed gear thats coming put, but they are rough, rugged, dependable and spacious.

If you have some bulky gear you want to have at hand, and in your ruck is just too far away, or perhaps you want to be able sling it to a buddy, stash it under a fuel depot or just need to fit your respirator ... the S10 haversack might well suit your needs.

I've got quite a few of them, and will be listing them on www.tacticalcoyote.com soon.

Review: Go! Outfitters Hammock

I had one of my awaited Kickstarter projects come in not too long ago and I have had some fun setting up up, and working out the configurations of.

This is the Go! Outfitters Hammock, which I had Wish-Lust'ed and even followed up, when the stretch goals were released.

I love hammocks, and get into them as often a I can manage. I have quite the collection these days, with the Sierra-Madre Pares hammock, and its Nube tent system. I even have a, Hummingbird mega-hammock
and a backpacking EaglesNest Outfitters hammock.

I opted for the fully kitted out version of the Go! Hammock, which includes a built in mosquito net and optional tree straps with cinch buckles. These webbing straps have a sewn loop at one end to feed through themselves, around your anchor point, be that a tree, mounted hard point or girder.

The cinch buckle itself is fitted with a loop of high performance cord, which is Amsteel. Che cinch works really well, and makes adjusting the hammock a breeze. It's just a matter of strapping and cinching.



The second optional feature is the Ridgeline cord, This is a lighter cord, also Amsteel in 7/64", has larks heads knot which can be looped through either the included steel carabner or through the heavy duty cords that feed through the hammock to hook it up.

The Ridgeline lets you hook up the hammock at exactly the right tension every time, as it's length is pre-set to give the optimal positioning. It can feed through the eyelet at either end of the flyscreen, from inside to allow you to suspend the flyscreen over the line.

When the Ridgeline is fitted internally, there are three loops of the same flyscreen material the rest of the top cover is made from that are spread evenly to ensure the fly remains securely fitted, although this means that you cant shrug it off and over if you choose not to use the fly later on, without taking the hammock down to adjust.








It is also possible to run the Ridgeline outside the hammock, which drops it lower as it adds length to the hammock attachment points.

There are three external loops to run the Ridgeline through so it hangs lower, which is not such  a big deal, but it can give you a little more sag if thats better for you.

The hammock is fitted with twin double sided zippers so you can climb in or out, and seal yourself away from flying or crawling biters. Even if you're only four.

The zippers are probably the weakest part of the whole setup; they are a very fine toothed zip, which seems to bind up a little bit under the tension of bodies in the hammock, some adjustment is needed in order to do the zip up all the way. No big deal for me, but made it hard for Tactical baby.

The inside of the hammock is really lovely design, the asymmetrical cut of the body allows very comfortable, stable bedding. The higher sides on either edge cradle the head and feet, rather than press down on them, in the way that other more symmetrical hammocks do, when you lay cross-ways. This was again nicely demonstrated my Tactical Baby, who also loves hammocks, and hates personal boundaries.

Another really nice feature of the Go! Hammock is that it features guy line attachment points, (and includes guy lines and tent-stakes) for you to set up, to tension the flyscreen, in order to give you a nice solid setup.

There are also fly attachment points on the body of the fly as well, to give you a truly tent like experience. This was a really cool addition to my camping setup, now that I have four individual hammocks, and one really large one, I could probably host an entirely suspended camping trip.

Treetops anyone?

Review: CamelBak HAWG

With thanks to CamelBak and as first seen on BreachBang&Clear.

I caught up with the reps from CamelBak at the SSAA SHOT expo, and they were kind enough to send me one the re-released Mil-Tac H.A.W.G. packs, to demo before they hit the shelves.

I am always on the lookout for a new pack, and as ever, want to set myself up with something that does double duty. Here's a link to the now discontinued pack, which if you can find it, it seems to be well though of in the pack communities.

I was really pleased to get this, and whilst I've not been able to take the pack out and give it a thorough field test, as it needs to go back to CamelBak after I've had my paws on it. That said I have had a good look over it and this is what I can tell you about it.

Unlike the older the 4 channel, 7 row PALS/MOLLE of the Mil-Tec H.A.W.G. the carriage grid on the new H.A.W.G. appears to have been replaced by a more sleek and unobtrusive 5 channel, 10 rows of the new 6/9 style platform, or something that looks very similar to it.

There is a broad panel of loop-field on the top front of the pack, for putting ID's and morale patches. The back of the pack has three raised areas of 5mm closed cell foam, making up the Air Director back panel for optimal load distribution and breathability. It has a really good feel on the back, even when the pack is loaded up. There are kidney flaps to guide the waist straps, with D-loops built in on top of them to give a good range of motion when wearing it.

The back of the pack opens up with a long asymmetrical zipper, which allows the fitting of a 3L hydration bladder, in this case the CamelBak Mil-Spec Antidote Reservoir Long with Quick Link. I liked the looks of the bladder too, but as it's a returner, I didn't try it out. However, it features a bite valve adapter which is very cool, manually opened adapters can be a pain. The tube clicks off for faster refilling with auto shut-off, so no leaking, and the new Fillport, is reported as the industry’s largest opening with air-light ¼ turn open/close for quick, secure seal and it also can’t be over-tightened.

The interior of the hydration section is also padded, giving you an insulated compartment, both from your pack and your back. Cold drinks stay that little bit colder, and you don't have a cold weight pressing on your back as you hump it around. Loops in the top of the bag take the hook on top of the hydration bladder.  

The older H.A.W.G. has a total capacity of 23 L in its 48cm (17") x 26.5cm (12") x 26cm (10") and weighs a surprisingly low 1.2kg (2.75lbs) which comes from it having a 500D Cordura on the outwards facing surfaces, with the back faces being 420D nylon on the shoulder harness back side and raised pod panels. The shoulder harnesses are filled with 10mm EVA foam, and all the internal surfaces are made of lightweight 210D nylon. The mixtures make for the reduced weight of the pack.

The top of the front of the pack features a stash pocket, with a dummy-cord and clip built in. Its also worth noting that all the zippers are fitted with string pulls to silence them, which is a feature I'm liking seeing on so many packs these days.

The 6/9 webbing will take all PALS/MOLLE pouches and accessories I've tried on it, so it's simple enough to hot-swap your existing pouches onto the new format built into the H.A.W.G.


Twin ports behind the shoulder straps give access to the hydration tube, and in an interesting addition, there are two access points tucked in behind the waist straps. these allow you to rout the cables up under the arms, rather than over the shoulders, where they could perhaps snag on weapon straps or the like.

You could also feed the waist straps back into the pack, to get them out of the way if you weren't intending to use them. Very tidy design.

Inside the main pack, there are in fact two zipperable sections.

The front section, which has dual zips and opens 3/4 of the way down, is lined in lightweight 210D nylon and on the back of the panel, has a set of pockets sewn in, a triple pen slot, two note-book sized pockets, and one the width of the pack. These would be good for the administrative type gear you might have on hand, but don't need to secure in any special way.

Maps, phone charger gear, a survival tin or even a IFAK like the ITS ETA kit could sit in one of these. Drainage grommets with mesh lining are found in the bottom of the section.  The front section was quite spacious, and would certainly do to stuff with a number of items, especially if they would lay flat easily. The 6/9 webbing is sewn right into the front of this section, so there isn't any padding between your pouches and the contents of the first section, something to be aware of if you are loading up the outside of the pack.

The inner section, which sits between the front "admin" section and the distinct hydration section, is even roomier. Again, it features a dual zip 3/4 opening, and the same drainage grommets in the bottom, but has the advantage of the internal padding on the hydration side, keeping condensation from forming and spreading through to your stored items.

Again, its pretty featureless, although it does have three wide webbing loops sewn in at 3, 9 and 12 o'clock, giving you attachment points for gear, or even to run shock-cord through to for some internal spiderweb structure to pack things down. I think that would be where I'd fit the McNett Gruntline, if I were keeping the H.A.W.G.  for myself.

I like a bit more internal structure to my bags, because I often have a lot of small needfuls kicking about, but for a small daypack like this, I suppose I would make do.
It was very comfortable to wear, and easy to don and doff, with the shoulder straps sitting nicely, and adjustable, with a pretty standard sternum strap to keep it locked down for long, arduous or exciting traverses.

The bases of the shoulder straps were set securely into the bottom corner of the pack, and looked like they'd take some abuse, and whilst I didn't get a chance to test it our under heavy loads, the waist band seemed to sit nicely on my hips, and keep everything where it needed to be.

The twin top and bottom compression straps were a nice touch, with hook-and-loop webbing keepers built in, they would allow bulky but soft gear like sleeping bags, outerwear and the like to be stuffed into the pack, and then buckled down tight to reduce bulk, nicely.

Twin rows of webbing sewn onto the base of the back would allow got you to set a sleeping roll, tent sustainment kit or other bulky but smallish items to the outside of the pack, without too much hassle.

I found the way it sat to be really comfortable, both directly against my back,but also in relation to my shoulder blades, neck and hips.  I had no feeling that it would interfere with the kinds of scrambling, crawling and other misadventure that I find myself doing. It also had a nice sturdy drag handle, for those times when I might want to be pulled out of any of those situations, or just to keep my hands on it whilst waiting for a plane to or from somewhere.

All in all, the new CamelBak H.A.W.G. is a very nice pack, simple design with some sophisticated elements. certainly a new look at an existing product, which is always good to see.

Wish Lust: Platatac - BF pack

Early last year I popped into Platatac HQ in Hallam and shot the breeze with BDC himself. He took me through the warehouse, and the factory, where all their in-house kit is constructed.

One of the things he showed me was the then as-yet unreleased BF Pack,
and I was pretty impressed. I then saw them again having been given prominent display at the SSAA SHOT Show this year, and whilst I haven;t managed to pick one up myself, I wanted to get a bit of a Wish-Lust review out there for you all, as they look like a really innovative pack.

The BF pack is designed as a short patrol pack, with key features to cover a variety of soldiering needs.

It would provides every soldier with a personal TACEVAC litter, SSE bag and room to enhance mission capability as needed, according to Platatac.

The main feature that sets this pack apart form anything I've seen previously is a lightweight TACEVAC litter, capable of carrying a soldier and his equipment, out of harms way for further treatment, built right into the pack.

Pic swiped from Platatac

The pack itself is comparable to that of other short patrol packs like the Propper UC pack I recently covered , measuring 46cm (18") x 27cm (10") x 9cm (3.5") internally but encompassing an expanding  SSE pocket allowing quick stowage of documents or extra equipment to further your load capacity. This is stored away behind zippered flaps, and cinching compression straps and topped with a hook-and-loop cover flap to keep it secure.

Pic swiped from Platatac

When those straps are unhooked, I wonder how well the fabric of the SSE pocket holds up against the load of the front of the pack, but with it, I've no doubts.

An ADDITIONAL kangaroo pouch beneath the external cover flap will take a triple shingle or insert for extra mags/medic supplies or other similarly sized kit for even more sustainment in the field.

Clever design also adds a pocket for hydration bladders to be stored behind the cord-locked SSE pocket.

Pic swiped from Platatac

The pack also features a small 3 row, 5 channel PALS-MOLLE covered external admin pouch with a two internal mesh pocket allows you to store and have easy access to essential documents, gadgets, spare batteries, cyalume or whatever kit you need to have on-hand when out and about. There is no shortage of storage in this pack, and that's even before you look at the main compartment.

Pic swiped from Platatac

Internally the main compartment is fitted with full PALS-MOLLE webbing, all of which is also loop-field for taking either permanently attached pouches, or "tear-away" ones. the "back" is fitted with 7 rows of 6 channels, and the front lip has 8 rows of 6 channels. The whole thing clam-shells for ease of access to everything stored.

I must say I really prefer this over the all-loop/no MOLLE lining of the Propper UC pack, as most of my internal carriage would be permanent pouches. There are three zippered off internal pockets, one on the back, and two on the front the back one being big enough to take a 3L hydration bladder. Two ports give hydration tube / antenna access points.

Another cool feature is the wire fed Quick Release System (QRS) built right in. Feeding the included wire through the built in loops, and the back of a plate-carrier, or a larger pack, you have the option to with a yank of the top handle, release the back and have full access to its features. 

This makes utilizing the built in and lightweight TACEVAC litter, which is designed to be capable of carrying a soldier and his kit,out of danger. I checked, and Platatac don't recommend using it as a hammock, it's not designed for that. The two sides of the litter stow away into hook-and-loop closed inset pockets, and are accessed by simply pulling away at the tabs. The pack straps can even be stowed away in the top pocket when the QRS is employed.

All in all, from the twin side carry handles, to the use of the same quality materials and hardware I've come to expect from Platatac to the level of detail given to not only carry capacity, but also clever storage options for all the loads, the BF pack would be a good step up from my old favorite the Bulloch Echo even before the addition of the litter feature.

I really hope this kind of system makes it's way into regular use, I can only imagine the benefits to those putting themselves in harms way to have a fast and effective way to deploy a TACEVAC system like this.

Review: Platatac WUP

It seems I'm running behind the times, gear-wise with some of my collection, with finances being what they are, and being the primary income earner of a large household, but I snap up bargains and good kit where ever I can. This is one of those items I found being sold second hand, having missed their retail release. It is the Platatac WUP (Water Utility Pouch). I believe it has been superseded by the Accessories Small Flask pouch,which fills a very similar role, and has very similar dimensions

Sitting at 20cm (7.8") tall, and roughly 10cm x 10cm (4"x4") around, the WUP is the perfect size to take a 1L Nalgene bottle, as well as a variety of other kit, like night-vision scopes, bundles of cord, magazines or what-have-you. Think of the WUP as an oversized FUP, and you can see where my affection comes from.

Fitted with a big oversized top flap, that has a long double-tailed webbing strap that comes over the top, and feeds through a webbing loop, before terminating in a big Fastex-type clip.

The twin straps do a good job in securing the cover in place, which might seem redundant, given that as well as the straps and buckle, the flap also features a broad hook and loop fixture.  Stripped from the lid flap, the straps can be used free-style over whatever you have sowed in the pouch too.


The WUP also has a shock-cord and cord-lock drawstring closure around the lip of the pouch, which allows you to cinch it in to grip the top of your bottle, or whatever else you have in the pouch. An internal loop field allows you to secure the lid flap inside the pouch, the give you a rapid access option.


The WUP features two columns of three rows of PALS/MOLLE on either side, giving ample real-estate for fitting it with other pouches, if you really need, but more useful I've found for slipping a glow-stick or a pen through.

The pouch is fitted with the usual Platatac semi-rigid and press-stud MOLLE strips, and will feed through four rows of MOLLE, offering a very solid attachment. Something to consider when attaching a liter's worth of hydration, or however much the other kit you store in it weighs.

A grommet in the bottom of the pouch stops you hauling a liter's worth of pond-water should you take a dump,  but this is where that shock-cord cinch comes in very handy for keeping a tight seal and keeping the outside, out.




I have really enjoyed having added a slightly larger pouch to my repertoire. Larger than the FUP, but not as big as either my dump pouches or the MEOP I also often wear, the WUP has given me somewhere to conveniently carry my watter bottle, but also keep a bigger range of items closer to hand than the FUP. Sometimes a bit bigger is just better.

So, if you find yourself browsing second hand pouches, and come across a serviceable WUP, I heartily recommend adding it to your collection, they work well on a Battle Belt or on the side of a pack.

Review: Condor - Gen1 Battle Belt

This is my third Condor review.  I covered their Modular Plate Carrier recently, and had some good things to say about it, with a couple of caveats. My Condor Nomex gloves are still serving me well. Condor apparently gets a lot of stick in the high-speed gear community, but as a quite removed observer (damn you, Pacific Ocean), it's been hard to get a good picture as to why. I'm going to focus on what I see and feel myself. Both my Condor pieces are second hand, from a fellow who was getting rid of his excess collection.


This is the now superseded Gen1 Condor battle belt, which is still available out in the world, but Condor are promoting their newer Gen2 belt directly.

Adding to my growing collection of MultiCam, this 1000d Cordura belt functions in the way that must battle belts do, it is a sleeve type affair, and requires an actual belt to be fed through it in order to attach and wear it. I have fed my Propper 720 Riggers Belt through it. Internally, the battle belt has a series of webbing loops to snag and hold a belt in place, and fits up to a 2" belt easily. These loops keep a belt in place both in the donning and doffing process, but also when wearing it, to keep it riding right. The two front panels have openings in the bottom side to run a drop-leg rig off the internally threaded belt.

Four D-rings are set into the top of the beltfor attaching a harness or braces to.

The inside of the belt was lined with a breathability improving mesh padding, with two bands of non-slip backing. It was very comfortable to wear when empty, sitting on top of the hips and conforming to the curves of the body nicely.

Front View

The belt is surrounded by two rows of heavy webbing, 6 channels on the two side panels and 8 channels on the back. When you load the belt up, some things happen. Even with a fairly light load of a Platatac Half-Med pack and a WUP container, the belt sags noticeably.

Side view

Back View

This sagging didn't really affect the comfort, or the fit of the belt, but does raise some questions about its stability under higher loads, when you don't want that extra weight flopping about when you are being physical.

I suspect this sag is due to the Rigger belt being suspended through the middle of the Battle Belt, rather than riding up at the top seam, but it seemed like a design flaw to me.

I wore the belt all through last Easter's Confest (2015) with the loadout as shown here, with a Nalgene bottle in the WUP, with my RhinoRopework Hornet and American Kami Super Colubris combo fed into the left-hand side belt opening. It was super effective, and I chopped wood, carrier Tactical Baby and ran around like a mad thing with no trouble keeping my wearables in place. I'd like to see how it compares to the Gen2 Battle Belt, but it stands up nicely against the Platatac Young Guns and Bongo Battle Belts.