Review: portable Campmaster dual-range stove

 Having a campfire cookout is a glorious thing: open flames, glowing coals, smokey flavors, but some times you want the surety and stability of a gas range, especially if feeding a family or in adverse conditions, something like this can really make a potentially miserable situation cheery again. 

The Campmaster Double Burner range is a collapsible unit that folds up into a 11cm (4 1/3" H) x 26cm (10 1/4" W) x 21cm (8 1/4"D) box weighing 3.1kg ( 4lbs 10 oz).It unfolds, with silver retention band folding underneath it to form legs. The adjustment knobs sit outside the frame, so you'll need to be careful of that when packing and transporting. 

When unfolded, the "lid" forms the splash-back and two wings fold up and "tab A into slot B" to secure the lid and form a windshield. The unit comes equipped with a detachable hose with a recessed port on the right hand side. the cylinder end of the hose fits 3/8" LHT gas cylinders, without requiring a regulator.

Unfolded and hooked up to a gas cylinder, the range has two burners each with independent control knobs, which throttle the fire from roaring fast-boil to gentle simmering. The burners are guarded by stainless steel wire grills much like  the retention bands/ legs. The base of the unit has a cut-out which serves as a drain spot for spills when in use, or as a handle to carry it when folded up. These are hefty enough to bear up under my biggest cast iron pots, though the wings and splash-back need to be folded back to make room, but certainly enough room for a good size skillet and a pot for full meal cooking.

 The unit can be used with Universal LPG from cylinders complying with AS2030.1 (or equivalent), which means it is compatible with Swap and Go cylinders

The stove doesn't feature a pizo-electric starter, so to ignite it you'd need a match, lighter or ferro-rod type system, that's not an issue for me as I carry multiple fire-starting options as part of my EDC. 

The wings and back form an effective wind-shield keeping the burners from blowing out and heat staying where you need, the blue enamel finish makes wiping down any cooking splatters or trail dust an easy task. Needing an LPG tank for fuel sort of restricts it to back-yard or tail-gate type events, unless you fancy hauling a cylinder about, but its reliable, powerful and super simple to use.

My parents gifted me this one, as they used it to cook on whilst having their kitchen renovated and are not big campers.

One final thing, the standard BBQ cylinders available to me don't have a 3/8ths" fitting,  so an after market adapter is required but these are easy to come by. 

I keep mine on the top shelf of my tucker-box /  chuck box which we built around this unit, where it not only stows nicely but can cook on, right in place. 
 

Review: Scotch eyed auger

 

I started seeing ads for these a while ago and got one a couple of years ago for bushcrafting adventure and general utility. Having manual tools on hand is good, both for emergency power-down use but also off-grid crafting. Hand saws, hammers and hand-drills are all reliable, if sometimes arduous tools to make use of.

A scotch eyed auger bit is a type of tool you can use to create holes either dry or wet woodworking applications. The “scotch eye” is the hole at the end of the auger and its purpose is to enable easy handling and additional leverage. 

This particular one has a 20mm auger bit (8/10th") with a single flute that runs for 9cm (3.5") for  a total shaft length of 15 cm (6") and terminating at a round pipe eye of 18mm (7/10th"). It appears to have been made from a 20mm hex ended drill bit welded onto the eye segment. 

The cutting tip of the tool starts of with a self-tapping screw-head that ensures good purchase and correct placement of the auger for optimum boring. 

The cutting face of the auger is set back from the leading edge of the flute, which has the effect of being a scoring/ cutting edge, around the circumference of the bore being cut, this ensures a clean cut and smooth finish.

The eye is set perpendicular to the auger shaft, such that a branch can be fitted through it  in order to make a handle to easily turn the auger and bore into even hard, seasoned timber. Once the tip has bitten, and the cutting face engages, the long flutes will guide the auger on a straight path through the wood, so be sure to get the initial line straight. 

The eye is also a means for producing peg ends that will fit into the hole bored by the auger. These can be  whittled manually and test-fitted in the eye or hammered through the eye to shave/ scrape the pegs down to size. The remaining hex of the original drill  haft is lined up to nicely  be hammered upon, which was also a nice touch. 

The eye is sightly narrower than the auger bit, which means that pegs cut with it will be -slightly- loose, which can be a good thing depending on the situation, but a long as you take it into account you  would be fine. If I were making a pole and branch ladder, i'd be lashing the rungs in, regardless. The length of the tool allows for quite deep (6") cuts to be made. This is plenty deep enough to make a rocket fire from a log like a Swedish Fire torch. Deep enough that you could probably pin log cabin logs together, though that would be a lot of hand cranking. pegs used in this fashion are called treenails or trennals and have been documented back as far as 7000 years.

I've seen some Scotch eyed augers with one face of the eye being sharpened to bite into the peg-wood, whilst the rear face is hammered and mine lacks this. I'm not certain it would be necessary and have done just fine without, but if you were intending to make a lot of pegs out of cut lumber it might be advantageous. I whittled down this segment of green branch the power company lopped from one of our cub-side trees, and its made a very good handle in less than a minute. I did this when my previous branch/peg handle snapped whilst mid way through boring a hole through a particularly seasoned piece of recycled timber. A minor setback, quickly addressed with a field expedient replacement and I got the job done. 

One thing that hadn't occurred to me until I was well into my boring task was that the swerf material (wood chips) I was boring out would make excellent kindling, even in wet conditions ,the inside of most wood stays dry.  This would be even more true with more resinous woods. I've used the auger on branches and logs I've found trail-side as well as dressed timber both fresh and reclaimed. 

One word of advice, ensure your leverage stick is a good fit and smooth or you'll hurt your hand whilst boring. Wear gloves. Be sure your angle is correct when starting off and check for drift. All in all its a very simple and elegant tool and at only 175g (6.3 oz) its an easy add to your bushcrafting carry. 

I made a simple leather pouch for it with belt loops, so I can take it with me along with my belt knife and trail hatchet. I imagine myself making tripod stools and even legged benches with this tool, as well as through-holes for future furniture projects. 

Review: Go! Outfitters - Landing Pad

A well made tarp is a crucial bit of kit that every outdoors expedition could benefit from, be it rain or wind shelter, shade or just a dry and prickle free place o picnic upon. Though at times a 9  x 12 tarp may be a bit too much, especially if you're just planning for a bit of a trail hike. Then there is your gear, be it packs, cook gear, bedding or even boots at the end of a long day. If like me you prefer a slung hammock to a ground tent there is the question of what to do with your gear, if whatever fly system you have doesn't cover it. The clever people at GO! Outfitters came up with something to fit that niche, the Landing Pad.   

It’s made from durable 70D polyester, with a 1000mm waterproof polyurethane coating on the bottom and a silicone coating on the top for extra protection and easy clean up. This makes the Landing Pad extremely waterproof. 

 The Landing Pad is 137cm (54") in diameter and has eight stake loops and four sets of drawstrings with cord locks around its outer edge. It comes with a set of steel hook-style tent stakes in a draw string bag to stake it down as needed. At 137cm in diameter, the circle is big enough that 4 people could sit on it back to back or three facing inwards, if legs can be managed. Certainly big enough for a trail-side picnic or to drop bags and boots on whilst hopping into your hammock. Stake it down under your hammock for a soft place to step onto once you swing your legs over but before you put your boots on. 

The four drawstrings around the edge of the Landing Pad allow for the lips to be drawn up into a low bathtub to keep damp ground run-off out. It also allows for the whole circle be drawn up like a purse to wrap your gear in a highly water proof bag. Obviously the opening isn't covered, so don't be throwing it in a pool or leaving it under a waterfall. By pulling two opposing drawstrings the landing Pad converts into a gear hammock,  stretching 2.4m (7'10") overall with a 1m (3') hammock space. Though it can be drawn tighter doing so reduces the capacity. I would use it as an along-side sling, rather than bunk-style to keep things in reaching distance and act as a buffer.

 This drawstring rim also enables the Landing Pad to be fitted over a backpack to shelter it from the weather and could supplement a poncho to keep both you AND your gear dry.  I found it big enough to be able to wear it like a turtle-back poncho, covering my back, butt arms and back. Its even big enough that I could shelter under it like an umbrella when couched, staying totally covered. 

I found that the tan/brown material made for quite the unobtrusive "hide" when crouched down under it when just off-trail. It occurs to me that with an expanded hiking stick or appropriately padded branch you could make a small single pole shelter with the Landing  Pad, properly staked out.The Landing Pad, with stakes and stuff-sack weighs 285g (10oz) and by itself 15g (5.3oz) and packs down to a pocket sized 4cm X 13cm X 18cm (1.5" X 5" X 7").

More than compact enough to stuff in a pocket or day-pack when going for a hike to provide a clean dry spot to break on. I have two  ( one brown one charcoal grey) and they make for an easy addition to any adventure without adding excessive gear load.

Review: Great Outdoors Silver Grande 9L tent

Having an ultralight bivy tent is all good and well for a bit of  a solo over-nighter off the trail when ounces mean pounds, but there is also a time and a place for a big tent that will fit the whole family, and gear. Sometimes you need to go big, and one such biggness is the Great Outdoors Silver Grande 9L a four room, 9 person tent.We jokingly refer to this beast as the Tent Mahal. All told this huge tent weighs 29.7Kg (65.5 lbs) so its definitely more suited to back yard or drive-in camp sites, though i have carted it in to a couple of sites in a trolley and/or hand wagon. 

This rather palatial tent with measures 6.4m (21') in overall length (2.1 x 2.2 x 2.1) and 3m (10') wide in the middle, 2.15m at the end rooms. The front room adds another 2.1m to the width to a total of 4.3m (14'). The side rooms are a little bit shorter than the main central room, which tops out at a very respectable 2m15m (7') tall enough for me to stand and stretch in nay room, quite a luxury. Each room has a door out wide zippering allows for good clearance around the bathtub bottom of the tent. The three off-rooms all open onto the central room with a low-trip edge of similar width as the external doors for ease of access. 

The internal doors are made of the same lightweight and breathable fabric as the inner walls of the tent, and self-stow in fabric pockets beside each door.  Each outside door features a flyscreen outer, with the opaque option as an in-set. these all wrap up with their self-storing toggle and loop attachments. The interior is really very spacious and airy. The walls are at a high angle, so you maximize the available space, which is often lost in lower dome tents. The internal walls are all a very light, breathable material, and well fitted. 

Each of the off-rooms have window panels on the sides which can be rolled up to add airflow and views. Structure is provided by two sets of colour coded fiber-glass poles, and each is designed to slot into sleeves built into the inner shell, and mount on captive pegs attached to split rings, attached to the base, in the corners of the main room. These also have clip-on stays to keep the inner walls taut. The off-rooms each have a similar system, forming an arch over the external doorway. Plenty of peg-loops around the edges provides for a well pegged-down base. 

Each room features clips in the corners to suspend a light or string a clothes line to air out what have you. The main room has two "window" panels in the roof and the fly has two clear PVC panels corresponding for light and ventilation. The windows throughout make for a very well lit and comfortable home away from home. 

The main room has two zippered ports in the bathtub floor wall to feed power or other cables in without exposing yourself to too many bugs and critters. Perfect if you have a powered site, a generator or the like. You might even feed an LPG hose to a cooker if in-tent cooking was your thing, though I wouldn't recommend it myself. There are also two sets of four mesh pocket sewn into the main room walls for all manner of small items; phones, sunglasses, tissues, spare socks, gloves, caps. This little touch helps organize personal effects that might otherwise vanish until pack-up time. (I once "lost" a wallet, went as far as cancelling all my cards only to find it under the tent when we packed up). The fly is silvered on the inside which adds significant protection from the sun, and radiant heat, and as previously mentioned has clear PVC panels matching the windows on the sides and top of the inner layer. 

The zippers are set under a lip for rain shedding and have a reflective cord loop for easy pulling at night. Numerous guy-lines are built in to strategic locations and the ground- reaching corners feature a heavy-duty shock-cord loops for pegging it down. The "front door" has a door-matt built in, perfect for keeping muddy feet out of your nice clean tent. The fly features a pop-out pavilion with two poles to form an annex that is billed as being able to join up with the back-cabin of a truck or van, for even more enclosed space, though i haven't had the ability to try that out. I have managed to set the whole thing up on my own, under good conditions, but it's easier with help. I have set the fly up the wrong way around several times, prompting me to write on the corners of the fly and tent ("tab A, slot B" type notes for next time I set it up. The tent nominally fits in a light nylon carry bag, with carry and drag straps, and a wheeled base, but I have had great trouble re-packing it every time. 

After use, I like to lay the fly out to dry, ( and the inner, too,inverted if possible) if space and time allows to have it dry for pack-down. In summary this is a great tent, spacious, roomy and airy, but its very large and heavy. With all the pegs in place, and well guy-lined down, the chain-of-domes structure is very stable in even quite high winds, and in the light rains I've had it up in we've had no leakage or seepage problems. Given its capacity, it could even do as a short to medium term bug-out home, once a suitable location has been scouted, whilst more permanent habitations are established. This was a second hand gift from a festival going friend of ours, and i probably wouldn't have bought one as large on my own. Looks like its no longer on the market, but if you have the need for a big tent, something like this would suit you well.

Review: ChinLin spade trowel

NOTE: rebranded but looks the same here: https://www.aussiestormshop.com.au/clearance-mini-hand-shovel-trowel-with-7-functions

Whether it's putting in crops, digging up a secret-squirrel cache, taking care of some business in a back-woods latrine or just some old fashioned fox-hole digging, having  a good digging tool comes in very handy and saves the old fingernails. I have a couple of folding entrenching tools in my camping/bug out kits, but even compact as they are, they can add a bit of bulk and weight. Sometimes they're even a bit too much tool for the job. A full-sized e-tool will make a big Dakota-fire hole, where a trowel sized tool would be more economical. I love multi-function tools, especially when they don't add function at the expense of the primary function. 

This little beauty is the ChinLin HW-901 spade and I originally picked a couple up on Wish.com but it looks like they are no longer sold there. I did find them on this Indonesian clone ( buyer beware). What it is is a 26.3cm ( 10 1/3") trowel with a para-cord wrapped box handle. Made from a  single piece of 420 Stainless steel, the handle has been welded along the middle of the upper face, obscured by the cord wrap. The trowel has a sharpened edge around 3/4 of its edge, with the final quarter being a serrated saw-edge. The spoon face of the tool has a nail puller cut in as well as a set of four hex-head wrench cut-outs. 

The edges aren't super-sharp but they're sturdy enough to chop with, which will be good for clearing brush, weeds or stubborn roots whilst digging. Weighing in at only 80g (2.8oz) it's not going to cut it as an axe, but it makes for a lively and light digging tool. The sharp edges and serrations do make digging through turf easy, and the tool-cut-outs don't effect digging and scooping output significantly.

There is a 7cm ruler printed on the inside of the spoon which is  a nice addition. The pressed steel has a spine ridge pressed in for stability and the tool is very stiff, which makes it very good when sawing or prying (splitting cracked wood or perhaps stone), especially handy when pulling nails with the nail puller or applying torque with the hex wrench holes. 

The cord-wrap is made of 290cm (9'6") of paracord, secured to the handle through four sets of holes drilled into the sides of the handle, and terminating in a lanyard loop at the bottom end. The handle has a slight taper which keeps the cord from sliding off either ends. 

Those side lashing holes and the hole in the spine of the spoon near the handle of the tool can also act as attachment points to fix a pole fitted into the hollow handle, either acting as a extension to the handle, or to turn the tool into a spear. 

The tool comes in a hand if pretty flimsy nylon pouch with a belt loop. I've found it very useful to have on hand when picnicking or hiking. The pouch keeps the sharp edges secure. 

I bought one for myself as a tactical hand shovel, and another for my veggie-garden planting partner. We've both put it to  good use and they've never failed us. 

Panjang Handle: 10.4 cm

Review: Stilletto titanium nail puller

I do love a  good salvage. Whether it be road-side junk-swap, flea market bargain or dump-harvest the idea of junk salvage strikes a deep chord in me from both a 

post-apocalypse survivor point of view  and 80's kids sci-fi. That said, sometimes having the right tool for the job, especially if you're working with aged or non standard materials. I do like to recycle timber, for garden-beds and storage shelf construction, and getting the nails out can sometimes be a real pain, especially in well seasoned hardwood pallets.  

Previously I have made do with my pair of  demolition hammers (the Dead-On Annihilator and the Stanley Fat-MAX FUBAR) which are brute force tools, even when paired with pry tools such as Jimmy and the ever rugged Breacher bar. I've had a lot of success with this combination of tools but they're inelegant. I'm also a sucker for titanium. I know its not a miracle metal, neither mithril nor vibranium/ adamantium but its pretty rad.

Now on to the tool!

This is the original Stiletto Titanium framing nail puller with the Patented nail removal feature! In essence it is a 30.48cm ( 11.5") pry bar, made of one piece of titanium. It has an open-truss design to cut weight but retain rigidity, weighing in at 300g (8.5 Oz)

One end features a standard cloven hoof pry edge, which is quite pointy, for aggressive purchase finding, and the other end its a cat's paw, 90 degree pry bar, with a similarly pointy tined  cloven end, and a smooth, rounded fulcrum for mark-free nail-pulling. The key feature of the cats-paw end is the perpendicular dimpler. This open-ended conical protrusion is used to punch a circular indentation into the wood,below the level of the head of the nail, in order to allow either of the pry ends to find purchase and pull them out. This is achieved by centering the open end of the dimpler around the had of the nail and striking the back face with a hammer, hard enough to drive a dimple into the wood around the nail-head. 

The dimpler has an internal diameter of 1cm (0.4") which should be plenty big enough for common nails found in timber. Stiletto specifically state it be used for "common nails" only

 

The divot allows the tines of the nail pullers to be worked under the nail-head without gouging the wood too much ( divot aside). I found that for especially stubborn or embedded nails ( or punched down, or otherwise deep) that the tines can be driven in by hammering in the tool from the other end. It should be worth noting that Stilleto claim the titanium strike faces outlast steel bars 3X longer - doesn't spall, crack & mushroom like steel bars. I also use the back face of the cats-paw to drive some nails, and though it took some transfer marks, the satin matte finish was un-marred. It's a bit light to act as a hammer effectively but in a pinch, just fine. 

The open truss body is clean edged and smooth to the hand, allowing a strong grip be taken without roughing up your hand.

The shaft of the tool is slim enough to be threaded through PALS/MOLLE channels, for belt, pack or carrier  carry, but I wnt through my leather scraps bag and whipped up a quick holster with a belt loop for my use. I look forward to easy break-down of pallets and furniture for firewood or lumber needs.

Its a great tool, multi-functional, rugged and fit for purpose. 

Review: Gobi Gear - SegSac Stuff Sack

 

Sometimes you just need to keep your gear in good order so you can ensure all the pieces you need make it from base camp to your destination and set up with  everything you need (or might need). Sometimes just jamming everything into a  bag will do but other times, some segregation really comes in handy. Initially backed on Kickstarter. but now in full production!

The innovators of Gobi Gear have come up with a solution to this need in the SegSac.Constructed of the super light, yet durable, water-resistant, rip-stop woven, 30D Cordura fabric.   Four internal compartments, sewn into the main tube, in the form of  an X shaped addition, sewn into the outside and all the way to the bottom. 

This keeps gear internally separated, yet still in one place for easy and quick access to what you need. Being sewn to the bottom means that items will not slide around and jump compartments.

The upper edge of the outer-tube body is laced with a draw-string with a cord-lock, which not only acts to secure contents but when fully open, also acts to stabilize the opening to prevent it collapsing under its own weight.

The SegSac is fitted with four compression straps to cinch it down to optimal packing size but it also provides carry handles and lashing points. The straps are fitted with clips  for ease of opening when under tension.  The base of the SegSac also features a sew in loop of nylon fabric to act as a carry handle. 

The compression straps terminate on a cap of the same nylon the SegSac body is made of and features a neck to cover the sides when compressed, adding to the security and protection of the water-resistant material. The SegSac is available in two sizes: 15 liter capacity and 20 liter capacity.

 used the SegSac in two ways: Firstly to pack clothes, and a towel ( using the segments to pack dirty/damp clothes away as they accumulate). I can fit 4 pair of socks, 4 t-shirts, a pair of pants and a mid-sized towel in it. The second thing I use it for is to stow hammock slinging straps and accessories, with 4 x 5m lengths of heavy webbing, 2x anti-theft laptop security cables (which when knotted  make very strong and abrasion resistant straps to hang from) and assorted other straps. 

NOTE: Water resistant only:  This SegSac is NOT a dry bag, but water will conveniently bead off it should it get sprayed or drizzled on.. Nor is it a heavy duty item, though it is well put together. Its most suitable for storing things inside your main pack, for ease of packing and organisation. Keep your socks and jocks clean and dry till you need them.