Review: First Aid Kit

I'm always on the lookout for things I can add to my store of preparedness items, large and small. We have a pretty well stocked and rotated "medicine cabinet", the odd compression bandage, band-aids, disinfectants and the like, and can manage cuts, bumps and abrasions around the house with little drama, but what we certainly lacked was a single, contained go-to First Aid kit. Even with the windfall of a mostly-full, retired ADF Field Medic Kit, I wanted to have some properly put together First-Aid kits and out of the blue, a 78 Piece Emergency First Aid Kit was advertised and I snapped several up.One for home (now hanging up in our main hallway), one for my car, and one "spare". I'm fond of spares.



Each of these hand-bag sized rip-stop and bright red kits is stuffed with a collection of well laid out items in several easy access pockets. There are three main pockets to this kit, folding over into one easy to see at a glance package. In the middle of this kit are 6 rolled 5cm x 4m bandages, a elastisised compression bandage roll, medical tape, alcohol wipe sachets, a set of plastic forceps, scissors and a set of safety pins.

The inner pocket is covered over by a clear flap, which in turn carries sterilised non-woven wound pads, both in 10cm x 10cm and 5cm x 5cm. It also carries a series of non-adherent 5cm x 7.5cm seterilised pads, an eye-pad and a bundle of elastic band-aid type plasters. Sufficient to patch up all manner of domestic injuries, where more intense medical attention is either not required, or can be at least patched long enough to keep someone from leaking all over the place on the way to see a Doctor.

The final pocket contains several items that I consider important both for specific needs and generally. Befind a hook-and-loop flap are a set of sterile latex gloves provides barrier protection against any infectious agents that may be faced whilst tending someones injuries and I think are crucially important when doing so. I usually put a couple more sets of gloves in any first aid kit I have, for this reason alone. Many years in a microbiology lab have made the phrase "Gloves!" part of my unconscious battle-cry when facing body fluids. A burn dressing is likewise a vital part of any kit. Burns are especially susceptible to infection, and require special care to avoid septic shock setting in, which may occur with fibrous bandages. A triangular bandage is also a welcome addition, being useful as a sling, head bandage and for splints. The inclusion of an instant ice-pack is a great idea , especially if in a remote location, even if it is disposable. I may replace this with a catalytic renewable one at some stage. Lastly, the inclusion of a space blanket made me very happy, as they are an awesome first aid and survival tool as I've said before, when reviewing the Bear Grylls Ultimate Survival kit.

When I was on my Junior High Outdoor Education field trip, in 1991 whilst living in Canada, and up in the Canadian Rocky Mountains, my tent-mate hacking into his thumb with an axe whilst holding the log he was looking to chop. Less-than-stellar, right there. However, I had a first aid kit on hand, and quickly patched him up sufficiently that he could be driven the several hours to the nearest hospital to get the stitches he required. Now, its not like he would have lost his thumb or anything, but having a kit on-hand, and having the where-with-all to act made the rest of his treatment a lot easier. Be prepared. Be equipped. Know what you have and how to use it.

Review: Kathmandu Hip bag

Here is a piece of essential kit that I received for Giftmas a number of years ago, which I have taken with me hiking all around Australia and New Zealand. It now makes up my bug-out-bag, and lives in the wheel well of my car, under Tactical Baby's car-seat. Being a sizable pack I've been able to use it as my sole day-pack when hiking up and around a number of mountains without being encumbered and more importantly keeping my hands and shoulders free. I've chopped and changed the contents a number of times, to suit my needs of the day.  It's also where my CRKT Stiff KISS and FUBAR live. I haven't been able to find what it is called, it seems to be out of stock, but here is what I can tell you about it.

There are three external pockets, one of which is a draw-string tightening bottle pouch, and two zippered pockets, each topped with a strip of SOLAS tape. The main body of the pouch holds an expansive chamber, probably at least 5L in capacity. Both the side pockets and main chamber are zippered, with toggles fitted for ease of opening, and are covered by well fitted lips to keep rain out. The whole pack is made of a hardy Cordura nylon throughout. Two sets of Fastex buckles on webbing straps are fitted to tighten the pack down, and there are three daisy-chain loops of webbing sewn onto the middle, perfect for fitting Cyalume sticks, I have three, red, blue and white, currently. The back pad is fitted with a wide band of closed-cell foam for padding, and also has a space between the pack and padding for fitting either a belt or perhaps documents. The side straps include some padding bands, both of which include a small, zippered utility pocket and come together in a wide banded Fastex clip. Two D-rings fitted to the top of the pack allow for shoulder straps to be fitted, to assist with load-bearing, or offering  alternate attachment points. A webbing handle finishes off the carry options nicely
Here's what I currently load out with: In the main chamber I have a tightly rolled woodland-cam waterproof poncho,  a linear induction flashlight (I taped over the emitter end, to cut down on light leakage). Two rolls of tape, an enameled mug, a roll of SES tape, a tube of sweetened condensed milk, 4 metal espresso cups, a bottle of bug-spray, a long length of high strength fishing line, a propane cylinder, the Bear Grylls  Ultimate Survival kit I've reviewed previously, and 50m of 5mm dynamic, along with two 2200kg carabiners and a Figure 8 Rappel Device.

In the outside zippered pockets,  I keep a snare kit, a Caribee camp stove, matches, Milton water  purification tablets, nails. In the other pocket, a set of bandages, BandAids, a survival whistle with a flint, tea-bags and instant chocolate. A Sea-To-Summit 10L Kitchen Sink lives in the bottle-holder, and in the side-strap pockets are another box of matches and a pill-tin with fishing hooks and sinkers.


By no means an exhaustive survival kit, but I like to think that with this in the car, I am able to be a whole lot more prepared for a road-side delay if I am out adventuring, or if the need arises, and we bug-out, an advantage over the elements.

Review: Stanley FatMax FUBAR

A couple of years ago I received a catalog in the mailbox from a local hardware store, and whilst flipping through it, came across something that immediately stopped me in my tracks. I've had a few hammers over the years, from ones I inherited from my father, to the bastard leftovers of shared-house shed tool boxes but I'd never before bought my own. I've even reviewed a multi-tool hammer I bought as a gift last Giftmas, but this is something different. This is the Stanley FatMax range FUBAR and it is a real beast. At 1.13kg it's a pretty heft piece if steel to be swinging, but this is no tack-driver. This is a breaker.

Made from a single piece of forged steel, with no fitting joins to weaken the tool, just a rubberised and textured grip covering the middle of the bar, this is a piece designed for some serious durability. It's design incorporates 4 tools in one, which as I've previously mentioned is always a draw-card for me. I appreciate extra functionality that doesn't compromise the efficacy of the tool. The head-end features a large striking face, positioned and balanced fairly well for rough work; pounding big nails, and bashing things into shape. As I said, it's not a tool for delicate fittings.

The back of the head features my favorite part, the toothed jaws are designed to fit and grab common lumber sizes (2x4 and decking boards). This is great, and I've demolished a packing crate in less than a minute with this, salvaging almost every piece for handy-work, where a regular hammer would have taken a lot more effort, time and risk of injury. Right tool, right job. I've also made bricks go away with it, not only popping one brick out of a wall, but also shattering them into gravel when the need arose.

The tail end is made up an angled pry-bar, with a nice broad chisel edge for getting a good "bite" into whatever you have slated for forceful opening, without being a snapable knife-edge. It also features a nail slot, beveled into the body of the tail, so as not to reduce the structural integrity of the edge. I've also used it as a lanyard loop. As you can see, the tool is coated in a protective coating, but has flaked off revealing the tempered steel underneath on the areas of hard wear. The hardened steel has taken pretty much all the beating I have dished out with only some light scratching, and I am fully satisfied with this as a demolition tool.

There has been some debate I've read about this as a post-Apocalyptic hand-weapon, and whilst heafty, and oddly shaped, I'd suggest that with practice, it would be a valuable addition to your arsenal. By practice, I mean using it as intended without mangling yourself or those around you. Whether tearing down improvised barricades, or putting them up, I'm glad to know I have a FUBAR in my car, to FUBAR anything that blocks my path. Just like Stanley the Honey Badger would. FTW.

Video demonstration anyone?