![]() |

![]() |


A place for me to review the various rugged, nifty and needful kit that I've accumulated, for every-day preparedness in the event of accident, disaster or world-shifting end-times Apocalypse, be it zombies, triffids or Mayan divide-by-zero errors.
![]() |

![]() |


The principle of the A1 is to form a semi-rigid cot, by stretching the four corners taut via a pair of webbing loops that are strung around appropriate supports, tree trunks or beams. This forms the base ontop of which the tent component is built. Each short end is held rigid with the inclusion of a spreader bar.

The base has a footprint of 203cm x 69cm / (80” x 27”), which is plenty big enough for me to stretch out on, even when Tactical Baby joins me. It is also no coincidence that the footprint matches a large Therm-a-Rest® mattress, which would be great insulation, let alone padding, but I found the cot-like finish very comfortable on its own. The fly open on either side or can be stretched open to form 17” vestibules. guy-lines and Y-shaped stakes are included to stake out the vestibule. The clever design of the A1 also allows for it to be used as an on-ground tent, with four Shepherd Hook stakes to stake out each corner. Its peak height is 90cm (35”), which is plenty high enough to sit up in.

![]() |
| Crate One: sleep systems |
![]() | |
| Crate three: cooking and fire systems |
![]() |
| Crate four: emergency systems |
I received my groundsheet as a birthday present, in winter, and took it on a number of walks, where its small packed size of 21.5x8x11cm (8.5"x 3.25"x 4") and light weight 295g (10.4 oz) made it an inconsequential daypack or cargo pocket addition.
Made from a tough Ripstop nylon construction, dual-coated with 3000mm Silicone and PU, it is fully seam-sealed with heat tape to be both 100% waterproof and puncture resistant. When staked out the Bathtub Groundsheet measures : 210x90x15cm (6'11"x2'11" x 6"), plenty big enough to fit me, and my gear, and the bathtub wall height is plenty big enough to keep my bedding in, or incidental wet out.
The corners are heavily reinforced and tailored to stand upright without stressing the seams and feature tape reinforcement to hold upright without sagging. This is bolstered further by built-in metal posts in the corners to hold it up, as well as sewn in buttressing peg-out loops extending outwards. the top edge of the corners also feature a loop sewn in to fit fly poles if used, and sewn in snap-points allow the groundsheet to marry up with the compatible Ultralight Ground Bug Net to create a fully-enclosed sleep system by pairing with this groundsheet. Nice forethought.
The included 4 Y cross-sectioned 7001 aluminium pegs have retention notches and a built in pull-cord for ease of removal.

When fully staked out and pulled taught, the bathtub effect is very stable, and provides a good barrier against the outside. the ripstop nylon is smooth and whilst not breathable, very comfortable to lay on directly, even after being in full sun.
I liked that it was big enough for me to fully stretch out on, as i'm quite tall. i'd want a tarp strung up over it to sleep on, just to give some cover, and I suspect leaving the most down-hill corner flat to allow any water a drain-off spot might be prudent without one.
I've woken up in a pool of water once whilst camping and don't recommend it.
The whole system comes with own drawstring bag for ease of carry and is small and light enough to be stuffed in a cargo pocket. I have been keeping it in my car along with some light picnic hiking gear and have used it as a picnic blanket a number of times. I think i'll be picking up the bug net and one of the Alton goods tarps to complete the set, and will test it out for sure.