Review: County Comm - Minnow Gripper

String, rope and string accessories. I like them. One such accessory that caught my eye was the Minnow Grippers offered by gear treasure source County Com.

What are they ? They are tarp clips. Clipping onto tarps to provide an anchor point where grommets don't exist. They can be used to hold onto and fasten plastic sheeting, drop cloths, tarps. canopies, awnings, pool covers, towels, BBQ covers, sails, cables and bags, netting and hunting blinds. All manner of covers you don't want flapping about.

 These clips clamp down on a surface  by means of  a two piece jaw which closes on the surface with friction locks on the back end of the scissor arms, much like those found on locking forceps. The jaws of the Minnow are cross-hatch grooved to provide "teeth" by which it holds fast  to many materials.

Made from molded fiberglass reinforced polypropylene, the Minnow is a dense and sturdy piece. The central pin has a over-hang lip and channel to feed through at full-open position, otherwise holding the clip together with little or no lateral movement. The jaws themselves open wide enough for clamping materials up to ¼" thick and the molded locking teeth have 6 positions to allow it to cinch down onto material in increments for a very secure bind.

At the back of the jaws, behind the "teeth" where cables can be secured without damage from  the teeth. This gap can also hold paracord to create a perpendicular attachment on a running cord.  Either in the locked teeth or in the gap behind the teeth in a sliding configuration.   The material is reported to crack resistant to 35° below zero (-37C). it is chemically stable and resistant to most solvents and marine conditions.

The tail end of the Gripper features a hefty hook on each arm for capturing cordage. the tips of the hooks are double wide, matching the maximum width of the Gripper. This means it is stable and flat on it's side. the base of the hook features a hole which is a perfect match for standard paracord, but will also accommodate thicker cords, especially if they compress a little. The hooks are 15mm deep and are angled, providing a depth of capture to reduce slippage of cord coming loose in vigorous flapping.

The twin tail hooks allow cordage to be looped over, one, the other or both hooks as the need arises or situation permits. Fixing one guy line or two or rigging  a single cord perpendicularly from the clamped material. The twin hooks also allow for some creative knot-free attachment, not unlike those possible with the Fishbone and Piranha knotless ties. Forces pulling back on the Minnow will act to tighten their grip , with an action not unlike squeezing on a pair of pliers.

The locking teeth of the Minnow Gripper first engage at around 9mm (4/10") at the tip which is about 6mm at the " back" of the jaws. That puts the maximum thickness of material they can close on, but each Minnow Gripper is purported to hold 175 lbs (80kg) whist only weighing 0.35oz (10g).

I haven't tried this for max weight, but the sail-cloth awnings I strapped down with it flapped a fair bit in the wind overnight without coming loose. That seems fit-for-purpose to me. Not a single Minnow came loose, in several configurations. I'm quite pleased with the utility, form factor and ruggedness of The Minnow

 

They come in two colour options: Tactical black and Coast Guard Orange. I opted for dont-loose-me orange for my 8. (two tarps worth) half od which I store clamped to my redoutable Mystery Ranch 1DAP  it's my regular day to day and Get Home Bag  so it seemed apt to keep some there too.

Review: Heavy Cover canteen and mug set

 As well as lights and blades I seem to collect bottles. I like to have my own reusable and reliable hydration source to hand. In my EDC bag, my desk at work, in my car and so forth. My usual go to bottles are my wide mouth Nalgene bottles and my venerable SIGG bottle.

Each have their benefits and drawbacks. Nalgene bottles are made from the sturdy Tritan plastic. Light and shatterproof, with a high capacity and easy-fill wide-mouth. They aren't fireproof so cant be used to boil water or cook in. The SIGG bottles are aluminium with an internal plastic coating and a finely threaded cap I've found to be delicate and prone to thread stripping. The Aluminium bottles are sturdy but ding and damage easily. They also do not support cooking or boiling due to the lining.


A solution I found is the Heavy Cover US GI Style Titanium Canteen Mess Kit. Over the last  hundred years or so  the US GI style canteen mess kit has served millions of military service members as well as millions of outdoor enthusiasts. Originally made from tin, aluminium or stainless steel or plastic, the Heavy Cover model replaces this with titanium. The kit is comprised of a 37oz (1.1L) canteen with Tritan Plastic and Titanium Canteen Cap options and a nested Canteen Cup 23.7 oz (0.7L) and lid, also titanium.


Combining time tested design with the high-strength to weight ratio material results in a light weight yet durable mess–kit. Perfect for those counting grams on the trail and people who break gear, like me. Both Canteen and cup can be heated and used to boil water or cook food.

Made from 0.5 mm thick titanium,  the Canteen with Tritan Cap weighs a slight 6 ounces (172 grams) and the titanium Cup Lid weighs a mere 4.8 ounces (132 grams). As well as being exceptionally  light, titanium has the advantage of being biocompatible (BPA Free, nontoxic to the human body) provides a non-porous, non-stick material for easy clean up when cooking. being thin walled and a rapid heat conductor , less gas/fuel is needed and you get a  faster boil time than with steel or other pot materials. It is anti-corrosive and will not rust. The mug has folding wire handles to assist in cooking and handling when hot.

The titanium cap of the canteen features a wide, thick thread to ensure ease of opening and removal as well as maintaining  a tight seal and resistance to incidental damage.  The lid itself features a titanium D-loop for clipping to a belt or pack, dummy-cording or perhaps even suspending over fire to boil water (beware steam and pressure build ups!) The canteen neck and mouth are quite wide which make for easy filling and drinking. The titanium cap sits quite high above the lip of the opening, I don't know why. It is hollow and floats, unlike the tritan lid which sinks like a rock. The titanium lid has a flat-folding wire lid loop for retention or for use as a float.

The canteen has a jutting rib around its mid-line which corresponds to the lip of the cup, to seat it. when nesting the cup lid is obviously left out, but I found that any pouch i could fit the canteen and cup in will also fit the lid in the bottom, ready to deploy to be a lid your cup for bean or noodle cooking. I don't know wat purpose that rib serves, except to possibly prevent rattle between mug and canteen on maneuvers.

I found the canteen had an off-flavor from manufacturing so I needed to give it a good wash and rinse out. Kraken rum worked nicely. The mug didn't have any such problem and cooked several meals without issue, and relatively non-stick and was easily cleaned.

Over-all I am really happy with this set, they're light, rugged as all get up, cook well and not bulky at all. I really like the traditional form factor and compact design for considerable volume capacity.

Find one on Amazon here: