Thursday, February 8, 2024

Prepping shed

As the final part of our move from the original home of Apocalypse Equipped Actual, we installed a garden shed in order to store my copious accumulated camping and prepping gear. No room in the new house or garage. My parents were kind enough to gift us this flat-pack, DIY ABSCO 3x3 shed. We built it over a couple of weekends, in a quiet corner beside the house, which was a nice project for me and my good-father. The shed consits of a frame to which pannels are afixed. Assembly is made easier with the help of pre-drilled holes and Absco’s patented SNAPTiTE technology that allows panels to lock into channels without the need for screws. (note, it came with screws and is screwed together, but self-tappers all the way.)

We found there was some manufacturing variance on the pre-drilled holes that needed occasional modification to set things secure and square. The shed is designed to be bolted onto a pre-poured concrete slab, but rental property constraints meant that we instead used a treated pine sleeper frame we anchor-plated together and bolted down to star-picket anchors we pounded into the soft ground. The bare grass we built over was covered in places by salvaged pallets or timber sleepers to set things upon. I put a long table in, along the back wall and a couple of ‘duckboards’ to avoid any seepage that might occur. 

I loaded my collected camping gear ( tents, sleeping systems, cookware and other needfuls, into some old ikea shelves on the table, and many, many stacked Tactical Milk Crates full of my other preps (canned goods, MRE's, and the like) that i'd collected before and during the Covid years. I also have spare tools, crockery and other super-numerate supplies. I also had a number as as-yet unpacked boxes of stuff from the previous house. Initially I just tetras-packed it all in, floor to ceiling in order to get it all in so I could free up other spaces and make them functional. This didn't lead to a very accessible and orderly storage system. 

A process of consolidation and rediscovery over a couple of sunny weekends enabled me to make a little more sense out of my collection, both for ease of access but also to make room to store more stuff and even use the space for additional supplies and furniture, like this cupboard unit, which makes for good assorted pack and kit storage (I have sleeping bags, hydration systems and some tools). 

I also managed to collect all our only occasionally used cold weather snow gear, as well as my various cammo outfits. Under the big table, I've been able to stack my foldable tactical crates. which makes good use of that space whilst having these easily available in the event of a bug-out or camping trip.

 The placement of the shed puts it in the shadow of our side fence and beside some trees and the back corner of our house. It's in the full daylight ark, but has some wind shelter. We placed it on a flat spot but the area is in a slight depression so the duckboards and pallets  keep all the stuff off damp ground. (I open the doors of windy/ sunny days to ensure it doesn't get too humid in there).

I'd noticed condensation on the roof and walls, so I made sure to space my stacks so there was some clearance on all sides (which also improves ventilation)and even though I have  a mix  of storage containers ( crates, chests and bags) I've managed to make an orderly store for my preps, in a safeish, dryish, dark place. I haven't yet put a thermometer in there. but I expect it gets pretty warm in there  (which will obviously affect shelf life of my food preps) but that's a next stage concern. 

How do you store and organise your preps?





 

Tuesday, January 9, 2024

Review: Rose Kuli hammer multitool

Multitools have a special place in the heart of all preppers. They make for a resource rich bundle that can provide a lot pf utility in a small package. whilst the ubiquitous Swiss Army Knife is probably the first multi-tool for many ( it certainly was for me), the Leatherman or Gerber belt tool has taken the place in the eyes and EDC of many and whilst these paragons of utility assuredly have their place, they don't do everything. That's were something like  the Rose Kuli hammer tool comes in. 

Prominently featuring a split hatchet head and a hammer head, the jaws opening up to expose pliers and cutters, with a spring assist for the plier arm. The Rose Kuli tool features red wood scaled handles, screws recessed in at the high end and riveted at the bottom end, the plyer-arm retaining loop seats into a notch in the bottom of the plyer arm, preventing the plyer head from opening up unexpectedly. 

The hammer-head sits directly in line behind the hatchet head to maximize impact efficiency for both tools. I found that the small hatchet head being only 4cm (1 1/4") broad but was plenty enough tool to carve a notch in some logs i have seasoning at the back door. You wont be felling any mast logs with it, but it'll work nicely delimbing small logs, and even baton splitting, the hammer head providing a good strike face. I worried that the hatchet head appeared riveted in place and would come loose but it turns out that top rivet only holds the sides in place and the hammer/hatchet pieces were secured by the pivot rivet and marry up tightly when the plyer arm is closed. 

The plyer jaws have both a fine toothed and a broad toothed section, for both fine and coarse tasks as well as a 1cm (2/5") cutting jaw, for wire or nail cuttings. 

The hammer itself drives nails quite well, for such a light tool at 400g (14oz), and I could tap one into my new treated-pine fence-posts with ease. The wood scales and plyer arm make for a comfortable grip on the palm and fingers. the hammer-side handle-face holds a surprise in the form of a selection of folded tools.There are 5 fold-out "blades" to further supplement the tools over-all utility.  From left to right there is a simple leaf-point single edge blade, a Phillips head screw-driver, a wood-saw with fish-hook disgorger tip, a 4-size hex nut wrench (5,6,7,10mm) with bottle-opener and pry head, and a serrated blade  with a file and flat-head driver tip. I would have liked a can-opener, and none of the tools lock, but each are functional.

As Corb Lund would sing "Well it's a vise grips for pliers, and pliers for a wrench
A wrench for a hammer, hammers everything else
"

It came in a flimsy nylon sheath with a hook and loop flap that barely covers the heads, leaving the edge of the hatchet somewhat exposed. 


For a light-weight tool, it certainly bridges the gap between belt-multitool and camp-hatchet.




 

Thursday, January 4, 2024

Review: Campmaster single burner stove

Carrying on in the series of camp cooking posts, let me bring to your attention the utilitarian Campmaster Single Butane Stove. This simple and straightforward single burner stove only weighs 1700g (3 3/4 lbs), without a fuel canister, and  folds down into a very portable 343mm(13 1/2") x 280mm(11") x 118mm (4 2/3"). I've seen similar burners set up in Korean BBQ joints for at-the-table cooking. I've often used it for exactly that purpose, inside at the dining table and on innumerate picnic tables. The blue enameled steel frame is both sturdy and easy to clean. 

The stove takes standardized 220g Campmaster CRV Butane Gas Cartridges 4 Pack (Countersink release vent) safety cans which are explosion proof and they fit into a compartment on the side of the strove. The cartridge locks into place with a latch in the lip of the bottle and a lever beside the adjustable flame control needs to be engaged in order to connect the cartridge to the stove. The compartment closes when the stove is in operation to protect it and the user. it is well vented in case of leakages. 



The stove has a peizo-electric sparker, triggered by the Flame control dial which is handy. The stove has strong heating power: (Gas Consumption: 160g/h (7.9Mj/hr)) at maximum setting, which is plenty for a number of serves of a meal, or several rounds of quick cooking meals. 

The hob itself is cast aluminium, and the stove-top comes out and when flipped provides a trivet for resting pots and pans on, small enough to hold up an enamel mug for singular brews, perfect for cold mornings in a tent vestibule. The hob head is recessed in the stove-top to shield it from winds Though it should be noted there is a manufactures not not for use below 0oC freezing, presumably because the butane freezes up in the canister or in the tubes.

The stove is lightweight enough that its easily hikeable, especially important if you're going to a fire-free area and want to cook, without hauling a whole BBQ and gas bottle. I have to admit I stocked up on the canisters during the Covid lockdowns, in case there were mains-gas shortages or disruptions as part of my  bug-in / bug-out preparations, thankfully un-necessary. We did have several pleasant summer night al-fresco dinner cookouts, and I've even used it for at-the-table teppanyaki  and hibachi type meals. ( Be sure to ensure it is used in well ventilated spaces and that the stove is set up on a heat-proof location as radiant heat can scorch surfaces. ) The canisters are self-sealing and can be stored for lengthy periods between uses.

Thursday, September 7, 2023

Review: Snugpak Stratosphere bivvy

I typically prefer off-ground camping in hammocks or on cots, but there is  a time and place for a low-profile, low laying tent, and sometimes even the ubiquitous dome tent is too much. Whether it be due to weather (high winds are not attractive to hammock users), location ( no trees or structures to sling between) or for a more clandestine profile, sometimes a bivvy is the way to go. I've used improvised bivvies before, with a tarp, poncho or just a poncho liner, but I saw this and wanted to add it to my collection, so as a birthday treat to myself I bought it as part of the Platatac End of Financial year sales.

This is the Snugpak® Stratosphere and it is the picture of functional, elegant simplicity. That's saying a lot, right off the bat, but it really impressed me. It is, essentially a waterproof over-bag for a sleeping bag, with a supported canopy to provide space around your head and shoulders.

The whole package is enclosed in a roll-and clip-top dry-bag type stuff-sack, with two additional webbing straps and buckles to cinch it in tight, it packs down to a mere 31cm x 14cm  (12" x 6") and all told weighs only 1.13kg  (2.49lbs).


The bundle contains two drawstring bags, one for the 7 aluminium alloy Y-stakes, and one for the two collapsible 8.5mm aluminium poles. as well as the uni-body bivvy itself. 

The bivvy upper is constructed of a 50D 190T 100% nylon ripstop cordura with (5000mm HH) waterproof polyurethane coating. All seams being fully waterproofed and taped, the upper meets the bathtub style  210T 100% Cordura nylon with (8000mm HH) waterproof polyurethane coating. This combination makes for a very dry sleep, even in very exposed locations.

Two sleeves at the head-end take the curved poles to pop out the hood section, seating in eyelets in tabs in the base to stretch out the head and shoulders area nicely. A flap at the back edge can be staked out to to pull it extra taut and increase the internal cavity even further.

Pegging the bivvy out at each toe end corner, shoulder and head end flaps, as well as the back flap makes for a very secure and stable structure. It sits very low to the ground, offering a very slight weather silhouette. 

When fully staked out the bivvy has a footprint of 220cm (87") length x shoulder width of 70cm (28") x feet-end width of 60cm (24") x and is 48cm (19") tall at the hood.

The bivvy has  a 3/4 length zipper, which extends all the way up and over the lip of the hood to seal the whole unit off from weather or bugs. As well as the storm flapped zipper, it also has 5 hook and loop strips for rapid egress in case of emergency or contact. You obviously compromise the water-proofing of the bivvy by not zipping it up but it's a trade-off you can choose to make. 

The hood canopy is stand alone stable and provides a shady nook to rest ones eyes in without the need to zip up at all. The fabric of the bivvy is soft and not very crinkly, making it comfortable to lay in without a lot of distracting noise. The back side of the hood features a No-See-Um Mesh Mosquito Net window, under the flap, which provides sheltered venting to reduce breath condensation from building up. In good weather the flap can be rolled up and stowed with toggle loops. 

The front of the hood can be zipped up all the way to the left corner for complete enclosure or left open to the elements. If left zipped up there is a hidden feature, a backwards zippable mesh face window, for added ventilation or visibility without creeping intruders. It rolls up out of the way when not in use. 
face window opened
rear window open, flap rolled up

Inside the hood there is a surprising amount of room, plenty enough to sit up on your elbows to read or even wrestle yourself in and out of sleeping bag or change clothes. The roof of the hood has a mesh pocket built into it, plenty big enough to slip a tablet, phone glasses or even a small light. 

Getting in and out of the bivvy is easy, once you get past the hood lip zipper, which can be a little awkward to get around the corner. It is super quick to put up, pegging the feet out, feeding the poles and pegging out the back takes just minutes. The end result is a sleep system that is elegant, robust and reliable. 

After a couple of trial set-ups, Tactical-Baby said they wanted to try it out overnight, so with just a yoga mat ,a sleeping bag and a couple of fleece blankies. Despite an overnight of 15C (60F) and spotty raining throughout the night (enough to leave pools on the upper surface they were remarkably comfortable and slept well past dawn. 

Given its small packed-size and light weight I wouldn't hesitate in either recommending it or strapping it to my own pack if there was even the possibility of needing to overnight trail-side. With its low profile and unobtrusive olive drab I bet you could pitch it in trailside bracken and smell passing hiker without being seen.

Tuesday, August 1, 2023

Review: Titaner titanium Bento Box


It's all good and well to load up with knives, axes, shovels and all manner of gadget and do-dad, but every-body has to eat. Old tin mess-kits are all good and well, light and compact, but not known for their durability or stealth.

I am very happy with my Heavy Cover canteen and mug set both as a hydration tool but also as cook-ware, so when the opportunity came to add to my titanium cookware collection in the form of the Titaner  Bento lunchbox Kickstarter

Pressed from food grade titanium, with titanium wire fittings, the bento box has a lid fitted with a tritan gasket inset into the rim. The lid is held in place with the two clasps at each short end. Along with the gasket, the clasps hold the lid water-tight, with a capacity of  600mL (20 1/3 oz), making it ample for cooking single serve meals as a small fry-pan or shallow pot. 120mm x 165mm x 60mm (4 3/4" x 6  1/2" x 2 1/3") 227g, (8oz). The inside is plenty big enough to carry an instant noodle packet and additions sufficient to make a decent trail-side meal. With some careful packing you could probably carry a half-dozen eggs in relative safety too. I might work on some inserts to do just that .

Speaking of cooking, the long titanium wire handle, which folds over one of the short sides, which provides a comfortable and stable handle to carry and manipulate the pan-side of the box allowing the user to adjust the pan over the fire. When using it, I have tended to clip closed the clasps in order to avoid any unwanted snagging and possible spillage.

The bottom of the pan has a slight inset bulge to reduce deformation and denting, and matches a similar bulge in the lid, allowing the pot to sit on the lid as a coaster or heat-shield. The rounded internal corners make for easy clean-up and ensure nothing gets stuck or burnt in to inconvenient spots. The gasket is easily removable for easy cleaning 

No coatings, no additional material other than the tritan gasket ring and the titanium, i'm confident that this is a healthy, resilient and robust piece of cook-ware as well as an eating surface, that also doubles as storage. The fittings don't rattle and hold it securely. I haven't yet found a pouch to slot it into but it fits into a napsack easily enough.  

Perfect size for 2-minute instant noodles ( shown here with spring onion, ginger chunks, lap cheung sausage and chilli paste.  All of which fit nicely in the box for easy transport. 

 

Friday, June 9, 2023

Review: Gardening shovel

Another hand tool post. I really like hand tools, not only because of their simple utility and ease of use but also on the freedom from reliance on power, for both off-grid use and grid-gone use.

Digging holes is one of those truly universal skills that all peoples; Inuit to Bedouin, Pict to Massai participate in. There is something very primal about digging. Whether is be digging up roots and tubers, clam or crabs for food, digging a fire-pit like a Dakota fire-hole ,digging for fresh water, for shelter or to bury a cache of booty. 

This most recent tool i've added to my arsenal is this very simple gardening trowel I saw online

This tool is simplicity itself. An overall length of 32cm (12 1/2"), half of which is "blade" the other half is handle. Made from a single piece of 16Ga stainless steel 2.2cm (7/8th") tubing, the blade has been punched out and folded outwards to a nominal width of 5cm (2")) The resulting edge is unsharpened, but finishes in a respectable point. 

The tip is slightly canted inwards almost to the centre of the handles cross-section, for scooping and balance.

The whole tool has been dip-coated in a tough black paint, which has barely worn on the edges from my digging in sandy soil and repeated throwing into turf and fence posts. 

The butt-end of the pipe handle is filled with a hard plastic plug that I managed to pry off, drill a hole into and add a cord loop for ease of removal and grabbing.

A quick dirt test resulted in a slightly lower yield  than the ChinLin spade but what it misses in surface area it makes up for in depth and low-drag design, which results in a quick digging tool. 

Silent and efficient this tool allows you to dig deep, even through tough turf, perfect for planting bulbs or seedlings. The most exciting part of this tool is that the hollow pipe handle doubles as an eye for mounting a shaft which can either add reach for digging or weeding without tedious bending. 

It is completely and totally coincidental that fitting it to a standard broom handle converts it into a fairly serviceable spear. Much like the humble axe, a spear is a force multiplier and unmatched in melee combat, even in the hands of relatively unskilled operators. 

Weighing in at a mere 120 gm (4 1/4 oz), this tool is easy on the hand and deft in the garden. The only drawbacks are the open end on the blade/ handle interface allowing dirt to enter, but not a  significant issue, a quick shake or bang will loosen that. In a pinch you could scoop up water and carry it in the upturned handle. 

Tuesday, May 30, 2023

Review: CRKT Freyr hatchet

Its no secret that I am a fan of axes, or cutting tools in general

I never go camping without packing at least my Fiskars log splitter and even a long hike will see my Boker Tomahook in my belt because their general utility and suitability to the tasks commonly at hand  camp-side or on the trail. But a log splitter is big broad and heavy and the tomahook is light, narrow  and short. Not all tools do all jobs well, which is why when I saw the CRKT Freyr hatchet I was impressed enough to add it to my collection. 

The broad head of the Freyr is made from the robust 1055 high carbon steel, with a textured black finish all the way to the beveled edge. It features a hammer poll on the reverse face, which I prefer over a spike end for the utility of having a hammer on hand. I rarely have to puncture breastplates, oil drums or car tyres. I do, however often have to reset nails, screws, tent pegs and the occasional fence-post.

Another thing I liked was the significant beard which enabled me to fit most my fist behind the blade for good control and protection when using the blade for shaving or planing. 

This makes it very handy for camp-craft, making kindling for fire-starting and coincidentally, the top corners of the head make good striking surfaces for ferrocium rods.

The usable blade bit length is 12cm (4 3/4"), with a slight toe rising above the top edge of the hatchet, giving decent bite when embedding head-on, which i like to do when pausing in chopping or as a carry-aid when processing logs. 

The haft is stained Hickory, with a very nice grain and a smooth finish, a 42cm (16 1/2") overall length, with a slightly flared end knob for good hand indexing and retention when chopping. The head has been wedged in the eye and has two steel rings holding it all in place and stable. As the Pale Rider would say, "that's a nice piece of hickory".

Unlike the Tomahook, with its full-length tang, the Freyr maintains almost the full weight at the axe-head end, lending itself to solid chops regardless of how you hold it. The traditional bit and eye design broadens the tool for extra log splitting power, without adding significant extra mass or bulk. Topping out at 814g (1lb 12oz) its certainly a handy tool around camp on on the belt when adventuring. 

I have made a leather mask for it, to protect myself and the edge, which I secure with the leather strip when on, 



The balance point is just behind the tip of the beard, adding to its nimbleness in the hand. Overall i'm exceedingly pleased with this hatchet, it is simple, elegant and functional. It holds a good edge, the black finish keeps it rust and resin free. 

 I wouldn't say it has replaced my Fiskars logsplitter for its power and reach or the Tomahook for its versatility and tacticool appeal. 


Related Posts Plugin for WordPress, Blogger...