Ask me anything!

 As I find myself a little shy of new
gear to review currently, I thought I might put the question out to you my readers to see if there was a topic you'd like my thoughts on? is there a type of gear you'd like me to try out? Is there a situation you'd like my contingencies for? Is there a skill or set of skills you'd like to hear more about and test me on? Piece of kit you'd like me to do a YouTube on?

Lay it on me in the comments or DM's and i'll do my best to answer in upcoming posts!

Review: EDC Monster Titanium Multi-function Pry Bar

Time for another pry bar! Having just covered the small titanium pry bar I wear in a belt pouch you might be asking why i have yet another one. (on top of the WTF prybar I wear around my neck as EDC). The short answer is Two is one, One is none, and I have two hands and hate being kept out of places. 

This is the EDC Monster Pry-Bar, which was launched via a Kickstarter project. As their sixth successful project ( they make a lot of folding pen-knifes and the like). The thing that caught my eye about this tool however was  its multi-function design. It's packed full of options whilst retaining rugged construction.

Milled from a block of corrosion resistant Gr5 Titanium, the tool features a number of useful features the designers workshopped from common EDC tools.  

First and foremost the pry-bar end of the tool is dual-beveled on the top face and has a bevel on the under side too, finishing up as a 1-2mm flat edge 15mm long rather than a sharp chisel edge. Not sharp by any stretch but plenty pointy enough to cut taped boxes and packages open. 

A good sized bottle opener sits at the belly of the pry end, in front of a finger notch. The double sided beveling allows the tool to be worked-into a gap easier than if it were flat on the underside, which is handy.

 The back spine side of the tool features a swiveling, magnetised cover that turns to reveal two hex bits, a S2 Alloy Steel  Phillip's head and a flat head driver, both held in place with magnets, but easily popped out. both drivers fit the ratcheting driver ring seated in the butt-end of the tool, it ratchets in one direction only, so you flip the tool to change direction of driving.

It's worth noting that the driver bits don't lock into the ratchet driver, and need to be held in place by the user, (placing a thumb on it seemed to work fine, but worth noting) . You could swap out the drivers with others as long as they fit in the recess.

Recessed on the underside of the tool is a magnetically affixed, titanium bodied "everlasting graphite" nibbed pencil. More than just a gimmick, these pencils are very useful for always to hand writing implements, though I have found the nibs to be fragile on occasion, they do write really well and are super handy. Astute readers may have noticed one lanyareded to my other EDC pry-bar

The pencil is short (1.65")  but not unworkable so its a very useful addition and is securely held in its recess, protecting the sometimes brittle nib, when not in use. 

The very butt-end of the tool features a tungsten carbide spike to allow glass breaking and inscribing into hard surfaces. It also features a lanyard hole for fitting you favourite beads or "don't-loose-me" cords. 

As well as the well placed groves milled in for grip, there are four recessed slots (2 on front, and 2 on the back) for fitting tritium vials. But due to shipping restrictions, they were not able to provide the tritium vial, but they did will provide luminous rods as add-on options. I have yet to install these but should be a matter of applyng a dry-clear epoxy glue. The tool has a removable belt clip, but also comes with a snug kydex sheath with a belt clip. All told the tool including its bits and pencil weighs only 85g (3oz) and measures 14.2cm (5.6") x 2cm (0.82") broad. Its a nice compact tool packing a lot of utility into its small frame.

Home Front: Battle belt

There is a lot to be said for having a go-bag, get-home-bag or bug-out bag ready and kitted out for those dire-circumstances where you need bare-necessities to make it to a secondary location.  But sometimes, requirement for action is a little less dire, demanding light-weight gear in limited capacity, but needs to be ready to go.  

One such method is to have a battle-belt. In my case I have set out to build a camping/hiking belt that has all the things I might find needful whilst out on the trail or if I needed to blaze one of my own. 

I've been modifying its setup for some time adding things, moving things and testing it on every hike we go on. The current setup has been pretty stable, both physically but also dynamically. 

I've included, hydration, first aid, navigation, fire-lighting and shelter options as well as storage space for other pieces of kit.

I started off with my Heavy Cover 
Titanium canteen and nesting cup in a GGG tactical pouch that I found in my collection. I put this central at the back of the belt for weight distribution. This gives me 37oz (1.1L) of water ready to go as well as a cook-pot and water sterilization (by boiling) method, on my person. Left of the canteen pouch is an older Platatac radio pouch that I use to house a ferrocerium rod and striker combo, a bic lighter, a set of medical sheers and a folding saw. 

So I have fire-making options and fire-crafting options. to the left of the radio/fire pouch is a three-pocket admin pouch where I keep a Sharpie, a pencil, sharpener, crayons a small note-book and space for my phone, as well as space for additional items. Right of the canteen is a Blackhawk Stealth Weapon Catch which holds a Go! outfitters Landing Pad mini-tarp for some single person shelter. To the right of that i have a tear-open GGG IFAK, that i've filled with a variety of bandages, gloves and the like, along with a CAT tourniquet  for extreme bad-times recovery and a Gerber Crisis Hook to round out the rescue/aid pouch.

To the right of the IFAK is a large Kryptek Highlander pattern pouch that contains a 100 foot spool of Go! Outfitters reflective guy-line as well as my emergency IR helmet strobe. I also have a couple of bundled hanks of paracord, one half of a set of pocket binoculars, and an Extac Australia Pocket Shot along with the arrow brush fitting and a couple of bags worth of marbles and bb's as ammunition. 

Finishing up the items carried on the belt is a collapsible mesh sided platatac ld dump-pouch, for foraged or salvaged items, and a horizontally slung ZU Bladeworx Grunt fixed blade knife that sits at belt-buckle level. A very sturdy tool for cutting, battoning and all manner of blade-craft. 

After its first big outing I realized that I needed to add shoulder straps to assist with its bulk and weight, so I rigged up some harness straps with some recycled kiddy car-seat straps.  With a little adjustment, I've managed to distribute the weight of all the items and keep it stable for those long hikes, or short dashes.

The belt that forms the basis of this set up is a Propper 360 riggers belt that has a hook and loop and locking bar fixture as well placed attachment ring for attaching safety lines or other retention systems. This belt runs through an older Platatac 3s belt pad that has PALS/MOLLE loops throughout and suspender loops as well as a breathable mesh padding. 

I think I might upgrade this ad-hoc system to something purpose made, like the Platatac bk harness perhaps, but for now, this whole rig lives in my room on the back of my desk chair, ready to throw on at a moments notice before rushing out to confront whatever adventure or misfortune may come my way.

Anything i'm missing or should add or remove? 

Review: titanium pry bar

Time to cover another piece of EDC that has slipped beneath my reporting radar for too long. Its no secret that i'm fond of titanium tools, they're strong, light and non-magnetic. I'm also very fond of pry-bars. Remember kids, your knife is not a pry-bar. Nor is your screw-driver. 

I've always been "the knife guy" in my circle of friends, because I always have at least a pocket pen-knife on my person. More and more these days, environments are less and less permissive when it comes to knives, so I've looked to alternatives. A quick self-audit showed me that I open a lot more boxes than I do cutting food,  and the leading edge of a pry-bar can do a number on most packing tape I've encountered. So I've added more pry-bars to my collection than knives of late. I also find myself making adjustments to equipment and storage units to make things fit more often that I am cutting things. In my search for a more perfect EDC pry-bar, I came across this listing right ebay link for this very functional tool. 

Machined from a solid billet of TC4 titanium alloy it lays 11cm long by 1.6cm wide and 1cm tall. It has a stiffening channel milled down it length on both sides a set of two crenellations at the tip end and three at the butt end as well as a deep scalloping for ergonomic grip. A lanyard hole at the butt end adds a good retention and draw option. The working end of the pry bar comes down to a symmetrical edge with a 2cm slope ending at a flat 1cm wide,  2mm final bevel. 

Its not a chisel, its a pry bar and that final edge is strong whilst being fine enough to slip in to most locations I've needed to pry up. That said, some jobs have required a little persuasion either lifting, wedging or just tapping the tool in to get that wedge started. Once started though, the tool performs nicely, lifting with the sturdy and ergonomic body. After a long period of it living in my pocket along with other elements of my EDC I whipped up a small leather belt pouch from some scraps, where it has been a handy tool for all my prying, tape cutting and even occasional flat-head screw driving need. All in a mere 45g item.

This is a lovely tool that I've enjoyed using and just nice in the hand as a fidget toy.