Review: Campmaster single burner stove

Carrying on in the series of camp cooking posts, let me bring to your attention the utilitarian Campmaster Single Butane Stove. This simple and straightforward single burner stove only weighs 1700g (3 3/4 lbs), without a fuel canister, and  folds down into a very portable 343mm(13 1/2") x 280mm(11") x 118mm (4 2/3"). I've seen similar burners set up in Korean BBQ joints for at-the-table cooking. I've often used it for exactly that purpose, inside at the dining table and on innumerate picnic tables. The blue enameled steel frame is both sturdy and easy to clean. 

The stove takes standardized 220g Campmaster CRV Butane Gas Cartridges 4 Pack (Countersink release vent) safety cans which are explosion proof and they fit into a compartment on the side of the strove. The cartridge locks into place with a latch in the lip of the bottle and a lever beside the adjustable flame control needs to be engaged in order to connect the cartridge to the stove. The compartment closes when the stove is in operation to protect it and the user. it is well vented in case of leakages. 

The stove has a peizo-electric sparker, triggered by the Flame control dial which is handy. The stove has strong heating power: (Gas Consumption: 160g/h (7.9Mj/hr)) at maximum setting, which is plenty for a number of serves of a meal, or several rounds of quick cooking meals. 

The hob itself is cast aluminium, and the stove-top comes out and when flipped provides a trivet for resting pots and pans on, small enough to hold up an enamel mug for singular brews, perfect for cold mornings in a tent vestibule. The hob head is recessed in the stove-top to shield it from winds Though it should be noted there is a manufactures not not for use below 0oC freezing, presumably because the butane freezes up in the canister or in the tubes.

The stove is lightweight enough that its easily hikeable, especially important if you're going to a fire-free area and want to cook, without hauling a whole BBQ and gas bottle. I have to admit I stocked up on the canisters during the Covid lockdowns, in case there were mains-gas shortages or disruptions as part of my  bug-in / bug-out preparations, thankfully un-necessary. We did have several pleasant summer night al-fresco dinner cookouts, and I've even used it for at-the-table teppanyaki  and hibachi type meals. ( Be sure to ensure it is used in well ventilated spaces and that the stove is set up on a heat-proof location as radiant heat can scorch surfaces. ) The canisters are self-sealing and can be stored for lengthy periods between uses.

Review: Snugpak Stratosphere bivvy

I typically prefer off-ground camping in hammocks or on cots, but there is  a time and place for a low-profile, low laying tent, and sometimes even the ubiquitous dome tent is too much. Whether it be due to weather (high winds are not attractive to hammock users), location ( no trees or structures to sling between) or for a more clandestine profile, sometimes a bivvy is the way to go. I've used improvised bivvies before, with a tarp, poncho or just a poncho liner, but I saw this and wanted to add it to my collection, so as a birthday treat to myself I bought it as part of the Platatac End of Financial year sales.

This is the Snugpak® Stratosphere and it is the picture of functional, elegant simplicity. That's saying a lot, right off the bat, but it really impressed me. It is, essentially a waterproof over-bag for a sleeping bag, with a supported canopy to provide space around your head and shoulders.

The whole package is enclosed in a roll-and clip-top dry-bag type stuff-sack, with two additional webbing straps and buckles to cinch it in tight, it packs down to a mere 31cm x 14cm  (12" x 6") and all told weighs only 1.13kg  (2.49lbs).

The bundle contains two drawstring bags, one for the 7 aluminium alloy Y-stakes, and one for the two collapsible 8.5mm aluminium poles. as well as the uni-body bivvy itself. 

The bivvy upper is constructed of a 50D 190T 100% nylon ripstop cordura with (5000mm HH) waterproof polyurethane coating. All seams being fully waterproofed and taped, the upper meets the bathtub style  210T 100% Cordura nylon with (8000mm HH) waterproof polyurethane coating. This combination makes for a very dry sleep, even in very exposed locations.

Two sleeves at the head-end take the curved poles to pop out the hood section, seating in eyelets in tabs in the base to stretch out the head and shoulders area nicely. A flap at the back edge can be staked out to to pull it extra taut and increase the internal cavity even further.

Pegging the bivvy out at each toe end corner, shoulder and head end flaps, as well as the back flap makes for a very secure and stable structure. It sits very low to the ground, offering a very slight weather silhouette. 

When fully staked out the bivvy has a footprint of 220cm (87") length x shoulder width of 70cm (28") x feet-end width of 60cm (24") x and is 48cm (19") tall at the hood.

The bivvy has  a 3/4 length zipper, which extends all the way up and over the lip of the hood to seal the whole unit off from weather or bugs. As well as the storm flapped zipper, it also has 5 hook and loop strips for rapid egress in case of emergency or contact. You obviously compromise the water-proofing of the bivvy by not zipping it up but it's a trade-off you can choose to make. 

The hood canopy is stand alone stable and provides a shady nook to rest ones eyes in without the need to zip up at all. The fabric of the bivvy is soft and not very crinkly, making it comfortable to lay in without a lot of distracting noise. The back side of the hood features a No-See-Um Mesh Mosquito Net window, under the flap, which provides sheltered venting to reduce breath condensation from building up. In good weather the flap can be rolled up and stowed with toggle loops. 

The front of the hood can be zipped up all the way to the left corner for complete enclosure or left open to the elements. If left zipped up there is a hidden feature, a backwards zippable mesh face window, for added ventilation or visibility without creeping intruders. It rolls up out of the way when not in use. 

face window opened

rear window open, flap rolled up

Inside the hood there is a surprising amount of room, plenty enough to sit up on your elbows to read or even wrestle yourself in and out of sleeping bag or change clothes. The roof of the hood has a mesh pocket built into it, plenty big enough to slip a tablet, phone glasses or even a small light. 

Getting in and out of the bivvy is easy, once you get past the hood lip zipper, which can be a little awkward to get around the corner. It is super quick to put up, pegging the feet out, feeding the poles and pegging out the back takes just minutes. The end result is a sleep system that is elegant, robust and reliable. 

After a couple of trial set-ups, Tactical-Baby said they wanted to try it out overnight, so with just a yoga mat ,a sleeping bag and a couple of fleece blankies. Despite an overnight of 15C (60F) and spotty raining throughout the night (enough to leave pools on the upper surface they were remarkably comfortable and slept well past dawn. 

Given its small packed-size and light weight I wouldn't hesitate in either recommending it or strapping it to my own pack if there was even the possibility of needing to overnight trail-side. With its low profile and unobtrusive olive drab I bet you could pitch it in trailside bracken and smell passing hiker without being seen.