Saturday, April 2, 2022

Horns and mugs.

 I've been really enjoying getting into Viking re-enactment these last few years. Part of this has been to get into the combat aspects, partly the crafting and the culture.  

Part of this is collecting and using period appropriate kit, part of it is becoming comfortable using anachronistic gear. Did you know its quite hard to chug a beverage from a drinking horn unless you tilt it to one side?

I now have three viking style drinking vessels. Two traditional and one more modern.

First up is the very slick and modern Goat Mug.

The Goat Mug is a 16 oz 470mL polypropylene horn shaped take on the classic keep-cup idea. Originally a Kickstarter project, now in full commercial production. It has been a mainstay of my desk since its arrival. With its silicone ring seal screw top and drip and spill proof locking clip, it's made a prominent workplace oddity. The best part is when people ask how it stands up. The molded leather hand-cuff inverts to act as a stand to support the horn with great stability, and protects the hand from hot beverage.  

The Goat Mug comes with a wrist strap and a shoulder sling for ease of carry, that clip to holes in the lid and tip respectively but I've never had much need of either.  I carry mine in my hand or table it in its holder. The seals are good enough to keep in a carbonated beverage and the horn keeps my mugs of tea hot for a lot longer than a similarly sized conventionally shaped mug would. They aren't even remotely period-appropriate but are perfect for adding flair to work or the open-pit bbq pig on spit Thing in the back-yard. The curvature of the inside presents some scrubbing challenges but I'm not phased by some tannin build-up and it's dish-washer safe.

Read the kickstarter Story here.

See their latest ideas here

buy one on Amazon here.



I also have a more traditional bulls horn drinking horn. This 8oz, 250mL capacity horn ( 9oz when filled to the brim upright) natural bull horn has a fine embellished brass rim riveted on and a brass tip fixed to the pointy end. The outer surface is well polished and the insides have been well cleaned and sealed to keep the horn structurally sound after long sessions of ale. The traditional horn has the drawback of not having a stable base to sit it down so once you get started its awkward to set it down till you've emptied your horn. 

I've knocked up a quick stand from some off-cuts for mine and you could always thrust it through your belt at the risk of spillage and wetting your britches. The brass fittings are handsome and lend themselves to adding some cordage as a sling.  It feels nice in the hand and it has a good capacity, and certainly looks the part.  

I personally like to be able to set a drinking vessel down when eating as a joint of meat on the bone can sometimes need two hands and pickled herrings are slippery.

 As i mentioned earlier, when drinking from a horn, its important you tilt the point of the horn downwards or to the side, not out in front or upwards when you drink, or you'll get an unexpected surge and slosh ypur drik all over your face, in your beard and down your chest. Amusing but wasteful and wont impress that sword maiden you've been waggling eybrows at over the fire.

 

 The final horn in my collection of drinking vessels is the "Eleet Original Viking Drinking Horn Mug"

 This elegant tankard has a 20 oz capacity and is fashioned from a worked ethically sourced ox horn in which the point of the horn has been bent back to form the handle / retention grip. The base of the is a colour-matched resin to seal off the mug and the inside is sealed with a 100% food safe non-toxic lacquer on the inside, in order to avoid the real horn odor and to avoid leakage. The exterior part is unpolished, unadorned and is kept real. The tankard feels great in the hand, it looks great and does the job. 


Being a natural product means each one has its own unique pattern and shape, but the true value is that it works. After a long day of swinging axes, hauling gear and arms and setting camp, let alone matching steel with the foeman and all the day to day challenges of the rustic Northman, having a large beverage to hand really brings home what is best in life. The "Eleet original Viking drinking horn mug" fits the bill AND I can set it down on the feasting bench to wrap an arm around someone close whilst feeding. 

 I don't think i'd want to put hot drinks in either of the horn vessels, (be it pine needle tea or the beans of Mocha for structural integrety reasons (hot water softens horn ...), but they're perfect for my home-brewed mead or cider. 
 
Its high capacity, flat base and broad handle make it the most convienient of my horns and mugs and as such keep it in highest rotation.
 

Tuesday, August 31, 2021

Review: MyMedic - MyFAK

Accidents happen. Burns, cuts, bumps and breaks can come to anyone at any time.  Having a first-aid kit to hand is a vital element to anyones preparedness loadout or lifestyle. Whether you're hiking in the bush, cutting firewood, camping, on a road trip, driving nails in the backyard or hitting pipe in the sandbox you'll want to be able to plug holes and tend to boo-boos to get on with the task at hand. I keep a generic first aid kit in the bottom of my day-bag, and have a small IFAK on my hiking belt, but there are some jobs they just aren't up to and frankly, being stuffed in the bottom of a pack does not make for rapid treatment in a critical situation.

This is where something like the purpose built MyFAK from My Medic comes into its own. Jam-packed with a very comprehensive collection of needful and useful items for treating a variety of ailments and accidental injuries. It does so all encompassed in a tactically minded form-factor. 

 With contents suitable for airway, bleeding, burn, hydration, outdoor safety, sprains and fractures and specialty surgical incident as well as topical treatment, the MyFAK  has packs that caters to both Basic and Advanced First Aid needs. (Available in two different configurations to suit your ability and need).

"By ordering MyMedic First Aid Kits you warrant that you have the required training and authorization to use the medical supplies contained within. MyMedic assumes no liability for their misuse."
  

The 1000D cordura pouch measures 6.5" wide, 7.5" tall and 5" deep, its no slouch. The advanced kit weighs 1275g, the same size basic weighs a mear 975g. The front of the pouch is rigged with 6" of loop field, in 3 2" strips, with a secondary layer of 1" strips straddling these to provide 4 channels of MOLLE attachment, for those of us who like pouches on our pouches or for stowing additional accessories likepens, lights, cyalume sticks or pry-bars. A 1" wide nylon strap runs all the way around the pouch, with a fastex buckle to keep it fully secured to the backing and fully closed> This is especially important as the backing, which features not only two press-stud closure MOLLE straps but the entire back is hook and loop for tear-away capability. a 1" nylon grab handle allows for positive grip and when unbuckled the MyFAK can be torn off your pack, or load bearing gear for ease of access or to pass on to someone who needs it.

The rip-away design makes for ease of access for what is otherwise quite a bulky pouch. being able to get at it without it being strapped to yourself or a pack would greatly improve your ability to get the components you need in a timely and efficient fashion. Crucial in a medical crisis. The fastex clip is no hindrance to access and does a great job in securing the pouch, but it has two easy-grip rubber toggles with medic crosses to pull the oversized zippers open. A lightly hook-and-looped nylon tab acts as a pull tab to assist in pulling the pouch open and holding it spread. Folding down to the front loop fields to stow out of the way when not in use.

The pouches hook field backing also means once removed it can be stuck to other loop-field surfaces at your leisure.
Opening the pouch up reveals its Tri-Fold Design

MyMedic created this pouch to give you quick access to your First Aid Supplies. This tri-fold design makes it easy to see what you need, when you need it.

Working from the innermost layer forwards the front the back panel has three Elastic webbing loops to contain items, a mylar space blanket, a hank of paracord, a cyalume stick and a RATS tourniquet. Behind that are two pockets with bandages, including quick-Clot and a chest seal. The back most pocket has a hook and loop  closure tab to keep it closed until needed.
The middle panel has more elastic webbing securing more bandages, irrigation saline and suture kits. An additional pocket behind the elastic webbing holds a compressed compression bandage.

I'm really impressed with the amount of material squeezed into this kit, both by clever arrangement of pockets but also arrangement of items. I was tempted to reorganise the kit but quickly recognised I wasn't going to get it any better packed or sorted.



The third section of the internals is the zippered mesh lind pocket panel. It is filled with small items; medications, electrolyte sachets, swabs, lotions and gloves. The section is itself a tear-away as well allowing you to pass it over or just get at it without disturbing the rest of your pristine supplies.

Whilst the rest of the kit is full of bandages, burn kits, and hole closers, the medication pouch holds pain killers, anti-inflammatories, anti nausea and anti-dirorrerals and electrolytes. The mesh panel allows the plastic pouch wrapped medications to be rummaged through. Good if you find yourself off-Oregon trail and not fancying dying of dysentery.  The flip side of the medication pouch provides a smooth field for laying out items: bandages, sutures, tweezers and such as you work on your patient, or just as a cover to prevent debris falling in your kit.

So, apart from being jam-packed with all kinds of goodies and needfuls, being well put together as far as design and layout, and having an excellent quick-release and access options go, this is an excellent First Aid kit.

I find it a bit bulky and heavy to put on my person, say on a battle-belt or on a plate carrier, except maybe on the back. Personally I feel it's suitable to go on a pack, or on a dedicated medic's harness. One thing I saw on their webpage and successfully tried myself was fitting  it to the headrest of my drivers-side car seat. Putting it in easy reach for shot-gun or back seat passengers should the need for road-side assistance come up.

Secured by its Molle straps, to the headrest prongs, it can be accessed by its quick release Fastex clip and pulled free by the webbing drag handle. If needed it could then be reattached in an upright position and unfolded to access its components in a secured place for out the door or back seat triage as needed. Perfect for on-the-move treatment. 

I have a Cert 1 in first aid which is basically: bites, breaks, bleeds and burns and I feel the contents and setup of this kit is more than adequate for my needs, and beyond what I'm trained for in its Advanced format, but not beyond my ability in extremis.
Related Posts Plugin for WordPress, Blogger...