Review: Platatac - 200rnd Pouch

Here's a pouch I picked up recently, second hand. It's a Platatac 200rnd pouch, designated as a 2009 design, but is no longer in current stock.

I was looking for a larger pouch, to carry bigger incidentals that I might have on the outsides of a pouch, and need rapid access to.

As with all Platatac pouches, this is ruggedly made, to withstand the rough treatment of ADF troopers in the field, and doubly so as this is made to carry 200 rounds.

Double stitched along all seams, and using as few seams as needed, its construction is from the hardy 1000d Cordura nylon, and features a box-sided lid, to give both adequate retention and cover from environmental, like dirt, sand and water getting in and fouling your linked ammo, magazines, or other gear stowed.

Featuring fully four sets of three-row reinforced PALS/MOLLE tabs on the back, as well as a pair of webbing brackets, it again tells of this pouch's designers wanting it to hold up to heavy loads.

Two channels of three side-by-side PALS/MOLLE webbing on each side offers additional attachment points for accessory pouches as an added bonus.
The Fastex fixed tuck-buckle ensures that the pouch stays closed when needed, with a fairly quiet action, although I usually prefer an adjustable closure action.

I found that the pouch will nicely hold bulky items such as this old style plastic canteen, as well as over five STANAG magazine sized MS Clean kits.
 It would also suit a set of binoculars, meal kits, or items such as a raincoat, poncho or other auxiliary kit. I have been considering how much 7mm dynamic rope I can jam into these, so stay tuned on that.

All in all, this is a great pouch, on the larger side of things, and I presume that like this one, there are still plenty kicking around, even though Platatac don't have it on their regular retail site any longer.

They DO however still have the 200's smaller cousin, the 100rnd pouch, which is essentially a cut down version.

Review: SORD - StormTrooper hand warmer

I got in touch with the good folks over at SORD Australia who had previously fixed me up with the long 870 scabbard pouch and a very clever covert-use hoodie. I had seen they had put out a couple of new items, and managed to secure some, just in time to take out camping and adventuring st s Post-Apocalyptic simulation weekend I was attending.

The first item I want to cover was their very fancy StormTrooper Hand Warmer. Available following a three year development development cycle in which it was put through high altitude parachute descents from around 7600m (25,000ft), and resisting wind speeds in excess of 250kph (135knots/155mph) as well as extended periods in mountain / cold weather environments in multiple countries. That was sales pitch enough for me. I've lived in Calgary, and a couple of other places which have snow, I've even taken a few pieces of kit to the limited snow we get here in Melbourne to trail. I hate the snow, generally, and being cold. Sometimes "hands-in-pockets" is not an option and I like to have options.

Check out that spacious muff!

This is where the StormTrooper comes in. Made from an outer shell fabric of Duro Industries LiteLok  (with a 500D Cordura option in Kryptek Yeti also available), the StormTrooper is filled with 40gsm Prima Loft fill (in double/triple layers), and is lined with the same lightweight lining as used in SORD's jackets.

It attaches in a variety of ways;  with three ITW Web Dominators on shock-cord loops, for attachment to a PLAS/MOLLE platform like a plate carrier or chest rig. There is also a broad hook-and-loop sandwich panel for attachment to platforms with a corresponding hook-and-loop bottom, like the Platatac MAC, I already have as it happens (loop-field faces forward).

Rear view showing belt loops, D-rings and storage cords

The back face is fitted with three belt loops wide enough to take 50mm belts (and feed over riggers belt buckles and Cobra buckles alike). It is also fitted with two D-rings for fitting a neck-strap to sling it around your shoulders.

Zippered blow-out section on the belly of the StormTrooper

The StormTrooper is fitted with 2 separate internal pockets with weather resistant zips for heater packs, or small items, one larger external front zippered pocket for small easily accessible items, like a compass, a light or other small tools and a lower zippered blow out section that increases internal capacity for large hands, especially useful if you have bulky gloves, a mounted GPS or altimeter or a map pouch on your wrist.

Second internal hand-warmer pocket, under recess to stow hook-and-loop flap

Elasticized, adjustable wrist cuffs, let you hunker the muff section down to fir your hands, without leading to a snag-risk in case you need to respond quickly. I found that the muff was perfectly shaped to hold my hands, and let me drop my shoulders, giving me a really relaxed posture, without having my hands stuck in pants-pockets, especially useful when my top was covered in a vest, or obscured by pack-straps.

The internal pockets gave a a couple of places to stash more needfuls, and certainly fit the hand-warmers I have. I also found that the Web Dominators allowed be to quickly roll it up, and stow it away, rolling down to almost nothing thanks to the LiteLok fabric and light down used, and its built in stash sack packs the muff down to almost nothing.

The internally secured storage baggie

Thankfully it's not yet been could enough to -need- the StormTrooper here yet, although it did rain rather miserably on the first night of my last camping trip, and the long walks around the site make for a good chance to stow my hands away. I also found it was a pretty good place to stash some small, light and often used items.

The multiple attachment options, multiple pockets as well as the spacious and comfortable muff section make this an excellent addition to anyone's kit, especially if you are going to find yourself in a cold and miserable place or two. It stayed out of the way when I wasn't using it, and even acted as a quick dump-pouch when I had to stow a long item and keep my hands free.

Post-Apocalyptic Roleplay, with the SORD Stormtrooper at my belly band

You might find that all the accessory shock-cord gets in the way, but they're all removable, and you can set it up as low-drag as you need it.

Next winter, I have a feeling I will be keeping this in my pack, to whip out  when the weather does a Melbourne on us. I look forwards to again being the guy people look at thinking "why didn't I think of that?"

Review: Platatac WUP

I've been collecting pouches for quite some time now, because I've found that there is always room for more pockets.

I've covered all manner of pouches in the past, from the very large, almost a bag in itself, to a variety of smaller utility pouches, down to the very small indeed. There are times though when a pouch needs to be a bit bigger, for large or bulky items, without wanting to add a whole other bag to your loadout, or better yet, having that item out of your existing pack. Thats where something like the Platatac Water Utility Pack, their WUP, comes into its own.

Large enough to fit a Platatac 1 litre Flask or a 1L Hydrapak Bladder,

or in my case, a 1L Nalgene bottle. The WUP fills a niche not unlike that of the Tactical Tailor Hydration Joey pouch, but in keeping with the Platatac range it is fitted out like a bigger version of one of their smaller pouches.


With both a chunky Fastex clip and a broad swathe of hook-and-loop the WUP doesn't lack for closure options, and security. Inside there is an internal loop with elastic shock-cord, to cinch in the lip of the pouch, giving even better retention.

I really liked that the Fastex clip strapping loops back through a loop on the lid of the pouch in a solid V shape, not only does this support the lid, but keeps the straps from flopping about and getting in the way.

A drainage grommet in the bottom of the pouch is a really good addition, something that you really appreciate if you've ever taken a dunk with a bunch of kit on. Especially if you then need to haul yourself up and out, and keep on running.

This is a pretty big pouch, with at least a 1L capacity, and it is held secure to you and your gear with a 2 channel, 3 row set of PALS/MOLLE on the back, ant its set up to be able to attach using 5 rows on the host side, giving a really secure fit for those heavy loads.

There are also three rows of two-channel loops on each side of the pouch, for attaching accessories to your accessories.

I took a couple of these on an adventuring weekend recently, one with an old style canteen on a Platatac Bongo battle belt, and the other on the side of a plate carrier covered in other pouches. Neither were ungainly, overly bulky and anything other than functional. Offered in both Multicam and traditional khaki, the two I picked up are in MC, see how I venture into the modern era!

Review: Voodoo Tactical - Open Top Single Magazine Pouch

When I backed the MS Clean Kickstarter project, which I covered recently, they also threw in, as a bonus stretch item,a PALS/MOLLE pouch to house the system in. Originally suggested to be one of the HSG Tactical Taco pouches, to keep costs down they settled on the simpler Voodoo Tactical Open Top pouches which are no slouch either.

I've covered a couple of open-top shingle style pouches before; the ones built into the Platatac SCAR mini-chest rig and also the Platatac Modular Radio Pouch. Generally, I prefer my pouches ti have a lid, or cover of some kind, because I am generally not using them as originally intended. So, that in mind, here's what I can tell you about the Voodoo Tactical open top shingles.

These single-magazine pouches have a good solid finish, with 1000d Cordura as the base material, shock-cord and webbing loops, throughout. They feature a press-stud closing pair of PALS/MOLLE tabs in the lack to feed and mount on whatever platform you choose, and the tabs are reinforced with plastic internally to add some stiffness, aiding in both feeding, and sturdy attachment. The shock-cord is fitted with a looped webbing pull-tab, and it comes adjusted to fit nicely over the MS Clean case, so presumably they fit over a 30 round STANAG or MagPul P-Mag magazine as well.

The fact that it is a single case might seem a bit limiting when it comes to loadout, given that pouches like the Platatac FUP but because it is fitted out with PALS/MOLLE loops on the front (and side) it is possible to stack them quite easily. This may well add more bulk and weight to a double stacked set than would a dedicated double mag-pouch, but each pouch independently carries the magazine, so no worry of them rattling about. Again, remember, I'm not a shooter, get proper training and advice of experts, but it makes sense to me.

They are also a slimmer option for those who aren't planning to be as heavily equipped. Especially useful in those times where every gram makes a difference. These are a good basic pouch, and I could find no fault with them, they certainly are a good match for the MS Clean kits, and work as advertised.

Review: MS Clean kit

This is one of those items that I really picked up for the show-factor alone, rather than for any real practical need. I saw it come up on my Kickstarter feed, as well as on Soldier Systems, where I find a number of cool pieces of tech and tools. So, first up, my admissions: I don't own any fire-arms, but I do a variety of costume and Live-action roleplay events, which is where my "for show only" interest lies.

This is the MS Clean kit.

Whilst I don't own or operate any myself, I appreciate the need to maintain and clean both firearms, and all the tools of the trade, so to speak. I also have a LOT of pouches, and have on occasion had small needfuls drop out and get lost as a result of being adventurous with them in a pouch designed to hold magazines.

I've regularly used my Platatac FUP and other mag pouches to carry my gear, and I saw the utility of a case that married with my existing pouches. The guys from MS Clean offer the cleaning kit to fill the gap they felt existed with the current issued cleaning kits in the US military, and wanted to take advantage of the prevalence of magazine pouches.

The case is curved like a 30 round STANAG or MagPul P-Mag and initial designs looked a little like the P-Mag, with surface ribbing for grip and structure. Made of an injection molded polymer, crush-proof cases prevents spillage of lubricant and bending of rods that they say current issued kits don't. The cases are long enough to old 3x sectioned steel rods, required to remove barrel obstructions like mud, stuck cases or squib rounds. They also include a couple of brush heads, and eyelet head, and a T- handle to drive the lot of it.

The production models include bore brushes for 5.56 as well as 7.62 and 9mm, as well as a dental pick, for all that carbon scoring. The polymer is chemical resistant so the case can be used as a miniature solvent tank, as well as acting as a container to place small parts of a firearm while cleaning.

They also offer them in a couple of different colours, black, tan, green and red. The internal dimensions are 1.8cm (0.72") x 5.3cm  (2.10") x 19.3cm (7.62") and externally 2.4cm (0.95") x
6.7cm (2.65")x  20.3cm (8").

I will be setting mine up as snack and tool carriers, perhaps using the red one as a dedicated boo-boo set, with alcohol wipes and small dressings, maybe even one of the Z-Medica quick clots. I can't comment on the quality of the cleaning tools myself, but I asked out one of my trooper friends to trial it out for me.

"The cleaning kit was a great bit of gear. First i would like to say that the case it comes in is a fantastic piece of gear. It fits in a spare mag pouch nicely and is easily accessible. The frogman lube is a great and does a good job. I found the wire brushes a bit too harsh though and the pull through rods rusted up very quickly. I was impressed with the extra brushes it came with. Its definitely a cleaning kit I carry in my webbing now." - K Taylor WA


The folks at MS Clean copped a lot of flack over the shape and design of the cases, being so close to "real" magazines. Here's what they had to say:

MS CLEAN may be mistaken for an actual magazine 
MS Clean is designed to utilize standard magazine pouches; however, these pouches are modular in nature and as such, the pouch selected to store MS Clean should be mounted in an area where it is not easily confused with an actual magazine.

What happens if I am in the dark and I go to change my magazine and try to put my cleaning kit in my rifle and get myself killed?
You won’t. You are a professional soldier or law enforcement officer, you have undergone months, if not years of training and you would never be so daft as to put your cleaning kit among your actual magazines. You would put it in somewhere else on your gear that wasn't on the front of your vest.

They are pretty prefect for my applications, and I look forward to kitting out my adventure gear (not to mention my kooky-costuming) with them.


To add to the mix, they now have a second Kickstarter underway for the DOUBLE sized kits. Twice the storage, twice the options, including a dedicated medic options, a trauma kit and super-deluxe cleaning options.

Review: Platatac - LD Dump Pouch

Having added a new black pack to my repertoire of cargo-carriers, in the MR 1DAP so I've been looking into matching accessory pouches. (Pouches, pouches, POUCHES). I have a pretty vast collection of khaki and Multicam pouches already, and I'm not just going to cover new colours of systems I've already reviewed but I also picked up some new ones.  One of these that I immediatly attached to my new pack was the Platatac LD pouch.

The LD Pouch or Little Dump was developed for high-speed, low-drag Special Operations and Dismounted Infantry end users, but it also fits my need profile nicely. I needed the ability to occasionally load up on extra loot, without wanting to carry a big empty bag, or pockets full of plastic shopping bags.



The LD Pouch, when folded up, is barely bigger than its 2 x 2 PALS/MOLLE attachment panels at its back. It only weighs 120g (a bit over 4oz), thanks to its lightweight mess material construction, with 500d Cordura only on its lid and backing. It's a snap to deploy it, even one handed.

When expanded by pulling up the hook-and-loop closure, the pouch opens up to give you a spacious bag for your goodies, be they tools empty magazines, evidence snatched on a raid, snacks for the movies or contraband at the end of a long night. Cordlocks snared in a webbing loop, and feeding out an eyelet give you cinching control, to close the pouch off, and the hook-and-loop lid can either be used to close the pouch, or mated to a corresponding loop field inside the pouch to stow it out of the way.

The pouch itself, being mesh, is quick draining, and breathable, perfect if you have damp gym clothes or a high-profile head you need to get back home. As long as it's a smallish head, I suppose. This isn't meant as a full-sized dump pouch, it's specifically fo small-jobs. The pouch is spacious enough to easily stow 6 or more 5.56 sized magazines (MS Clean gun cleaning kits seen here) to give you an idea.

With three separate mounting options; the 2x2 PALS/MOLLE, a webbing linked tri-glide buckle and broad belt loop wide enough to take any of my duty or rigger belts, the LD is good and modular, as you'd expect from Platatac. This small, utilitarian pouch sits innocuously on the side of my pack, but would equally disappear on my hip, along side my Mark IV pouch and multitool pouches.

I'm all for keeping my hands clear, and as much as I like cargo-pockets on both my pants and kilts, there are definitely times when stuffing some loot in a bag on a pack is superior to shoving them in a thigh pocket.

The LD dump pouch is perfect for that kind of job.

Review: Platatac - OC spray Pouch MkIV

As I mentioned in my LD-60 flashlight review, I mentioned that I lost a bunch of stuff when my car was broken into. One thing I lost was my Hexbright v1 torch too which I kept in a Platatac ASP pouch.

So, when my replacement Hexbright came in the mail, I needed a new pouch for it, and I had noted that the ASP (expandable baton) pouch didn't quite fit the light, being a little too long, allowing the light to be accidentally switched on.


I popped into the Platatac retail shop with my new Hexbright, and the guys helped me out wiuth a better fitting pouch. This is the OC spray Pouch Mk IV.

The pouch is around 15cm (6") in overall length, and 5x5cm (2"x2") at the base it fits the Hexbright really well. The pouch is fitted with a press-stud closure as well as a 50mm webbing pull tab for good grip and release. This is a lot quieter than a patch of hook and loop, and less bulky than a Fastex clip. The 500d Codrura body is taped and double stitched which gives all its high stress points extra strength.
 

The top of the pouch is open, which keeps the light (or your OC spray, if thats what you're packing) in place, but gives you access by swiveling the lid out of the way, without popping the press stud. A grommet in the bottom of the pouch give you drainage, for those quick jaunts into bodies of water that happen from time to time when you live adventurous lives.

Equipped with the standard PALS/MOLLE fittings that all of the Platatac pouches. I use this as a belt pouch by fitting the tab through the second MOLLE loop, giving you a quite wide, but very secure belt loop. It has a fair amount of travel on a regular belt, but couple it with the loops of a belt like the Platatac SICC belt and you have a rock solid platform for your light (or, you know, OC spray). I'm allergic to capsicum, so I try to avoid pepper spray. This is a solid utility pouch, and if you have an odd shaped or sized item, I recommend taking it into a shop, asking for advice.

Review: Fenix - LD60 flashlinght

I was unfortunate enough to have my RAV4 broken into out the front of my house in December, and lost a bunch of kit that I had, both in the back, in a jumbled heap, and also in and around the front seats. I had my Platatac MAC, fully laden from an event I had been at emptied, but left behind, and a variety of other things taken, It was quite unnerving, as it had happened as I slept not 10 m away.

One of the things I lost was my most excellent Fenix TK-51 light, and I reached out to the good folks at Fenix and LEGear. They put me onto the folks at G8 who listened to my sad story and helped me select a new light to replace it. I wanted to try one of their newer models but wanted to get something portable and powerful. The LD-60.

The LD-60 certainly meets my requirements. Measuring up at 15.5cm (6.1") long and 4.5cm (1.8") in diameter around the body, 6.25cm (2.5") at the head and 360g (12.8oz) (excluding batteries). Lighter and smaller, the LD-60 fits nicely in a variety of pouches, although it comes with one of its own. The all-round build is more conventional than the teardrop big-circle/little circle configuration of the TK-51, and the triplet of Cree XM-L2 (U2) LEDs (with a lifespan of 50,000 hours each) which are in turn powered by either three 18650 rechargeable Li-ion batteries or six 3V CR123ALithium batteries. Even more exciting is that the three battery wells can accommodate one, two or three batteries and still power the light.

Eco

The circuit design also includes reverse polarity protection guards against improper battery installation for those in-the-dark battery changes, as well as digitally regulated output which maintains constant brightness, regardless of battery charge levels.

The LD-60 has the same kind of stepping power settings as the TK-51, with Eco: 30 Lumens (150 hours runtime) which barely lights up an outdoor setting, but OK for indoors or right at your feet. Low: 160 Lumens (29 hours runtime) has a very gentle effect outdoors. You can see, without dazzling yourself. Mid: 500 Lumens (9 hours runtime), which is the first setting that has any use at seeing at a distance, or broad areas.

Low

 High: 1500 Lumens (3 hours runtime) casts a very significant light, illuminating a whole street clearly and lastly, Turbo: 2800 Lumens (1 hour, 30 min. runtime). This is like a hand-held sun. Or at least a car's headlights.

It also boasts a 460 m (1,509') beam distance which I tested by walkign to the end of a breakwater in the Port Phillip Bay, and happily illuminated the houses on the foreshore, some 400 m away, easily on Turbo mode.

Medium

The light also has an "instant-Strobe" function, activated by holding the single button for 3-4 seconds. The strobe alternates between two different frequency of flashes and is both off-putting and attention getting. They are pulsed at the 2800 lumen setting, and are not good to look at.

Not good at all.  Which is excellent.

High

The switching between the settings is achieved by first powering on the light, with a brief hold of the power button, and then single presses to stage up the light from Eco all the way to Turbo. Similarly, powering the light off is by a two second hold.

The built in circuitry also has a "memory" state, recalling the last power-setting the light was used in, to give you immediate functionality for repeat usage needs, as well as a heat-damage auto-limiter.

It does get hot. Even with its durable aircraft-grade aluminum casing, and rugged design, the triple LEDs put out a lot of heat. The case itself is 

Turbo

Premium Type III hard-anodized, which gives it a very good anti-abrasive finish and the toughened ultra-clear glass lens with anti-reflective coating is protected by being in-set behind the broadly crenelated rim. It comes with a spare o-ring for the gasket seal and with this is waterproof to IPX-8 standard. (2 m (6.5') for 30 minutes) It is also shock proofed for 1m drops. Table-height, don't get any fancy ideas!

The tail cap features two wide lanyard strap holes, and it even comes with a braided cord lanyard to go with it.

All in all, I am thrilled with the LD-60. I must say it is a step up from the TK-51, smaller, neater and less complicated. 

Re-Review: Hazard4 - Escape RG

Escape, as new

As posted in RecoilWeb ..... 

Ages ago I covered an essential piece of my EDC, my custom made EDC holster harness. This faithful piece had been with me for years, and has reached the end of its life. I found the Hazard4 Covert Escape RG combination set, and for the last 18 months, my personal carriage needs have been more than met.

Hazard4 are the "Tactical" arm of Civilian Lab makers of fine modular kit. The link I followed brought me to these, this is the Loader rig with the optional extra anatomic harness.

What it is, is two sets of the Escape Rig, one for each side. The two halves are identical, so I'll cover them as just the single unit.

Here are the two Escape halves, with the Anatomic shoulder harness, and another piece at the bottom to hold them together for stability.

Two pouches, with Anatomical Harness and kidney strap

The pouches are made of Dobby Nylon and have "PU X 2" treatment, and measure 12.5 x18 x4 cm
(~5" x7" x1.5") externally. The main panel is faced with two hook and loop closing pockets, one that fits my Surefire 6PX like a glove, and the other which his more squat.

Both of these pockets are elastic sided, and open cornered. Bear this in mind when looking to fill them. I've had smaller items slip through those gaps, and out of the top, but once I'd found the right fit, I've not had any problems.

Rotating Buckle

In this shot you can see some of the rotating buckles  that are fitted to each corner, each backed with a tab of the same padded material that backs the pouch for wearer comfort.  This is some very thoughtful and innovative design. no more buckle-pinch!

You can also see one of the tri-glide buckles that sit on the middle of each of the four sides. These are for accessory loop and strapping, and I'll get into that a bit later.

The 2013 version of this pouch has all black labeling and non-reflective zippers and fittings, for even lower profile wear.

Front pockets

The "back pocket" of the pouch is an open slot, wide enough for my receipt and card filled wallet, and is mesh-sided to cut weight and improve breathability and drainage. (Luckily Australian money is plastic, in case I ever take a dunk...) You can see another of those elastic-looped tri-glides here, to which I have dummy-corded my wallet. No more dropping it into the toilet, off piers, or leaving it on cafe counters for me!

My iPhone sits in the corresponding other side.

What you cant see is the wide swathe of black loop field, for affixing a hook-backed holster, like the Stick-Up.

You can also see the double zipper here of the inner pocket. Very useful!

Inside the Shuttle

Inside that inner pocket, you see where some real thought has gone into making these pouches. As well as the tough nylon outer, they are lined with quilted micro-suede

They also feature a series of webbing and elastic channels to fit your tools and needful gear, I have my SAR Dead Ringer comb and CRKT K.I.S.S. folder in mine on this side. Passports, and paperwork on the other side.

The pocket opens all the way to the bottom, but, like a good admin pouch, it has webbing retainers, keeping it from flopping flat, but catching it at about 45o so your pens, USB sticks, or whatever don't tumble off into the wide blue yonder.

The back pocket has a press stud on webbing closure, with two sizing options, which is great. I tend to clip my wallet in with the big, and my phone in with the snugger length.



The back of the pouch features a belt loop,wide enough for all the belt I tried it on ( both my 5-11 TDU belts, the 215Gear Ultimate Riggers belt, and the PM Leather Hobble Belt.

Left and right pouches, after 18 months

It also features a press-stud flap option, for quick-release needs.

Why even have a belt loop? Modularity! One of the coolest things about this whole system is that it can be worn so many ways.

 Those corner buckles attach to the included cross-straps, which are two fully adjustable nylon webbing straps, with a press-stud in the middle, to connect the two. All of the straps will "double-back" through the buckles for a really secure fit.

Left and right pouches, after 18 months, side by side

 The tri-glide attachment points allow you to rig any number of stability or alternative attachment options. The rotating corner clasps mean that the straps stay flat no matter what configuration you wear them in, and they stay upright as you move, depending on how you wear it.


The included cross-straps are a little more versatile than the Anatomic straps, but not nearly as comfortable. The pouches can be worn under the arms, holster style, singly or in pairs, horizontally or vertically, but also on the hips on a sling, as a backpack, slung cross-ways like a bandoleer, on the thigh as a drop-leg or on the front of the chest or even as a shoulder bag.

Left and right pouches, after 18 months, trimmed and untrimmed

I used one of the cross-straps to act as a kidney-height stabiliser,  having found that on their own, the pouches slid forwards when I bent over without them.

 One last thing. Each of the pouches comes with a "Shuttle Pouch" which is made from the same Dobby Nylon, and lined again in the quilted micro-suede with mesh pockets along with nylon strapping. The Shuttle pouch is designed to fit into the "Back pocket" of the main pouch,and be clipped in. It features waterproof zippers and a set of webbing eyelets on each of the four back corners for dummy-cording (mmm, dummy-cord: looks silly, keeps your gear on you...).

Single pouch, ventral style

This was a seriously feature and function filled set of kit.

I've been wearing it now for 18 months, every day, getting the configuration and fit right and I must say, it has been one of my better EDC investments for some time. 

I don't feel "dressed" with out it, and it really is my go-to item when it's time to run out the door; be it emergency, fire, flood or groceries.

That said, 18 months worth of wear have taken their toll. The Dobby Nylon has pulled from its seams along the long edges on both sides, in once case, Ive needed to trip the front set of pockets right off, because of them flapping about. 

Side wear, no jacket

Side-draw, under jacket

Under jacket, back view

Under jacket, front view

I wear it every day, all day. I tent to wear a waistcoat when its warm, or a jacket if its cold, when I'm going to be at work, or around people I don't want to give the impression that I'm packing a pistol, because it often gets that kind of question. Depending on your situation, you might want to bear that in mind.

I've traveled internationally with it, and keep my passport safe and snug in one of the shuttle pouches, both of which I have strapped into the main holder, to keep them from falling, or being lifted out. Again, they raised some eyebrows at the security counter, but they kept all my valuables up above my bet, and against my body, so I was happy.