Wish-Lust: ZyntonyRa light Strips

Ok, I was contacted by the people from Zyntony, who had launched a bad-assed light Kickstarter, and not had it make its threshold,  but they are back with a brand new product, that has already surpassed it's threshold, by 287% at time of writing, but I wanted to give them some more bandwidth with the info from their press-release.

Their new offering, the Zyntony Ra is a game-changing light for outdoor adventure enthusiasts that is designed to light up the entire area around you instead of just a spot in front of you.

At full power, Ra puts out 800 lumens of warm natural light. A pair of Ra attached to the shoulder straps of a backpack boast a staggering 1,600 lumens of light creating a “zone of daylight” around the wearer. “This is brighter than ten good headlamps”, one of the founders exclaimed in their release. He continued: “We named the light Ra after the Egyptian god who carries the sun across the sky because carrying one of these lights is like carrying a piece of the sun with you.”

I've covered similar strip lighting projects before, in the PackLight but the Ra is a step beyond.

Multiple mounting options enable Ra to be attached almost anywhere. The user can fix it to any ferrous object using the built-in rare-earth magnets. Ra can be attached to nearly any article of clothing using the accompanying magnetic backer strip, just by slipping the backer-strip under the outer-layer of clothing, and the Ra snaps into place magnetically. Using the D-ring strap and simple hook and loop ties, Ra can be fastened to virtually any piece of gear.

Each of the emitters can put out well over 500 lumens each. So in theory, the light could put out over 2,500 lumens. However, they are only running them at slightly over 1/4 power. Zyntony state they do this for several reasons:

First, is that the emitters are way more efficient - (in that they have a much higher lumens-per-watt output) at lower power. This means that you get a brighter light and longer battery life compared to a light that only has one or two emitters.

Second, by running them at lower power, their life is significantly extended to the point that they will virtually last forever (immortal buyers beware...).

Third, multiple emitters allow for each one to have a separate light dispersion pattern. This allows a less complex and more cost-effective way to balance light spread vs. throw, especially good given its area-effect design principle.

And fourth, by having multiple emitters running at lower power, you can spread out your heat dissipation, also especially useful if you're wearing it.


Ra is powered via a micro-USB input. Zyntony makes four different sizes of battery packs allowing the flexibility to carry just the power you need or as much as you want.

The Ra is designed to be lightweight to facilitate attaching it wherever you want so there is no internal power. It must be powered via USB. By connecting to a power pack via the USB, Ra has the flexibility where you can select a small BatPak for just the power you need or a larger one for as much power as you want. And you can connect up to three Ra's to BatPak II, BatPak III and BatPak IV. That flexibility supports a lot of different mounting options.

Zyntony are planning to certify the Ra to IPX7 which means it is submersible to 1 meter. It will certainly withstand the rain. The USB ports are the biggest challenge they are facing in this but by planning to use rubber boots/escutcheons on both Ra and the BatPaks, it should be waterproof as long as you use the Zyntony USB cable and power pack.

I'm really looking forwards to seeing what they can do when I get a set in-hand, but for mow, their on my wish-lust list!


https://www.kickstarter.com/projects/zyntony/ra-worlds-first-strap-light/description

Review: Hardcore Hardware Australia - TWI-02

I signed up for, and was one of four winners in a Hardcore Hardware Australia Facebook competition to take home their new and improved Tactical Writing Implement, the TWI-02. His has been a nice addition to my tactical pen collection. Currently I have the Cybernetic Research labs Tactical pen in my Hazard4 harness, and the Ti2 magnetic pen as part of my daily pocket collection the HHA TWI-02 is a very substantial competitor to what goes in my EDC.

The shaft of the pen is constructed from 6000 series, non-reflective, black anodized aluminium for extreme longevity and wearability, and features a recessed crown for positive thumb control with integrated steel pocket clip. The crown recession is via a series of stepped rings, which gives a very nicely textured grip, without leaving sharp edges to catch on anything. It is 147mm (5.78") long and 14mm (0.55") at its widest, and weighs in at
51g (1.8oz).

At the opposing end of the capped pen, they have incorporated a 46-48 HRC steel ‘ball’ tip for emergency glass breaking and impact applications. 

I've pounded a few things with this, and so far it's held up very well to my tentative testing, with no damage to either the ball, or the housing on the body of the pen. The cap screws down onto the body of the pen at the writing end, giving a very secure connection for when you want to deal out some percussive or pressure point based persuasion, but HHA avoid putting machined threads on the "outside" of the pen, by having a "clip-on" connection when you use the writing end.

There is an O-ring at the writing end to give a full seal making it completely waterproof when the cap is screwed down.

Knurling at key points along the pen aids a positive grip, as does the differing profile through the piece. Coupled with the recessed crown, you can get some really good gripping angles from this, whether you are writing or using the glass-breaker.

A steel clip fixed onto the side around the crown end of the pen is well sculpted and gives a really positive grip to a pocket notepad or wherever you stash your pen.

When it comes time to replace the refill the TWI-02, it will accept standard Parker and Fisher Space Pen refills, but for the life of me I haven't yet worked out how to do this. I think it must be the very tight tolerances that it is put together with, and I'll have to get in touch with the HHA guys when I run out of ink. 

Putting the TWI-02 up against a couple of my other "tactical" pens, the Cybernetic Research Labs pen
and the Ti2 Techliner pen the TWI-02 certainly comes up on top when it comes to imposing presence and size.

I had one attentive reader noted in my Sneak Peak post that the TWI-02 looks considerably like one of the Boker tactical pens and whilst they are very similar I don't think the resemblance is anything other than coincidental, the Tactical Pen world isn't very big.

I really like the feel of it as a pen, and also as an impact tool.

Review: SharpShooter

I saw a cool impact weapon in one of my feeds, and got in touch with its creator, Karate Master Robert Moran,  to see if I could try one out. Master Moran was kind enough to send me one, and I've carried it in my pocket for some time now, and can give you my thoughts. This is the SharpShooter keychain and what I can tell you about it.

The keychain consists of four distinct components. The core element is the paracord that runs through the center. This is doubled up and serves as the main conduit for the Sharp Shooter's action.

Knotted at one end, a length of steel tubing, covered in a silicone sleeve for grip is set up to run freely, apart from a silicone gasket, which pins it in place as a friction lock.

A steel o-ring is looped into the main paracord loop and is used as the retention system for the keychain, and its as easy to use as wearing a ring. Being free-floating the ring and the steel tube can slide freely. 

The last component is the keychain component, which features a steel oval screw link as you might find in climbing or in boating. It holds your keys in a nice tight bunch, ready to open your doors, or perhaps offer a face-full of "please unhand me, uncouth ruffian" as needed.

The idea of the keychain is to offer an alternate means of carrying your keys as well as offering a flexible weapon, that unobtrusively sits in your pocket or purse.

Master Moran offers an instructional DVD as well as on-site training at his Dojo. The tool works by cinching up the pipe all the way to the top of the knot, up near the screw-link, and by slipping the toggle back, you can transition from a downward strike with the pipe as a pressure point tool, but which a flick of the wrist, you can "shoot" out the keys, to form an impromptu flail or mace. 

The ring keeps it secure and locked into your grip, but subtly enough that it certainly doesn't LOOK like you have anything other than a set of keys dangling over your knuckles. 

I have tried the flick and swipe techniques, and the strikes with the pipe piece a couple of times, on a couple of different materials, and with some of the techniques I remember being shown by Sensei Guest at a Bujinkan winter camp in flexible weapons, I could see how this could give you a very game-changing strike in a last-ditch self defense situation.

I'd suggest you check your local concealed weapons laws, but if you fancy adding a little something to your EDC to give you an edge, that doesn't raise a lot of eyebrows, for the otherwise noncombative members of your family, this might well be something to look into.

Review: RaidOps - TM-Joe & MF-Delta

Check out these bad boys! I got in touch with a long time source of Wish-Lust for me from RaidOps out of Korea.

They make a wide range of titanium impact tools, knives and hard-wearing and multi-function pieces of wearable art. The two items that I got are the triangular MF-Delta and the evil platypus skull shaped TM-Joe.

Both are made of grade 5 titanium, and are double heat-treated to over 500oC to achieve HRC 50-52. They are finished in a dark-brown patina.

The TM-Joe is 84mm (3.31") x 58mm (2.2") x 5mm (0.2"), weighs in at 42g (1.5oz) and features 11mm (5/16") nut holes in the "ears" and nose" with a smaller, 9mm nut hole adjacent to the larger one in the nose. The very tip of the tool is shaped to act as a pry-bar, with nail-pull at the center. The pry-bar is not chisel edged, so there is no fear of cutting things accidentally, but will limit that "first bite" width needed to get a pry happening.

As well as the mean looking eye-holes, there is a lanyard hole in the middle of the top of the piece which mates with the RaidOps Quick Release attachment clip, a small piece of polycarbonate plastic with two rounded pinching surfaces that fill the lanyard hole, and hold with sufficient force to prevent any accidental dislodging.

A quick forceful tug and the tool comes away in the hand, ready for action. Both tools feature attachment points for the Quick Release mount, and come with a standard ball-and link chain.

The MF-Delta is made from the same Grade 5 titanium alloy with it's dark brown finish.It measures  61mm (2.4") x 70mm (2.76") x 5mm (0.2"), and weighs 31g (1.09oz), 31g (1.09oz). It features two hex driver cutouts, one of which also doubles as a bottle opener. It also features a single 7mm bolt hole, but has four lanyard holes in its middle, and another at one tip.

The MF-Delta, being shorter and more evenly dimensioned is a little less obtrusive to the eye, where as the TM-Joe is more stylized to look like a piece of art. Neither are bladed, with all the edges being rounded if not fully milled. Even compared to the NukoTool Skully or the Nuko ACDT they look more like jewelry or abstract art than an impact weapon.
When snapped off their neck-lanyards, both the MF-Delta and TM-Joe fit both snugly and safely in a palmed fist, those rounded edges don't dig, nick or snag.

The rounded "necks" of both tools quickly slip around the inter digital gaps between fingers, giving you a really secure grip, and bracing against the palm to let you drive them with considerable force into whatever you felt the need to. I put some pretty effortless divots into furniture around the house, with a very satisfying sound. I found that the grips were probably the smoothest and best fitting for my hands that I've encountered for this kind of tool. Great thickness and width of contact points and sufficient aperture to be held naturally.

Worn around the neck, or attached to a keychain, these innocuous tools are both elegant to look at, have a beautiful finish and even a "chime" when struck, I have been really pleased to add them to my collection, and will probably keep one on me whenever I travel, not to mention visit anywhere that regular defensive items might be frowned on.












Be sure to check with local regulations and legislation when it comes to this kind of item. It would be an easy enough thing to confirm, rather than falling foul of LEO's just doing their job. Being booked, fined or incarcerated won't help your ability to respond to an emergency, so be smart.


But be smart with gorgeous looking items that work well and are robust, like the RaidOps tools!

Review: Rhino Ropework - Tritium fob

I wanted to get my partner Lorin a piece of jewelry for her birthday, but didn't feel that a store-bought piece was really "me" ( as you might imagine), but I was lucky in that I'd been following the exploits of Shane Marks of Rhino Ropework who as well as some really excellent looking marlin spikes and fids for ropework, has also been turning out some really lovely fobs, and better yet, hollowing them out and fitting them with vials of tritium!

You may recall that I had a bead made, with six vials of tritium installed by H3, for my keychain,and I really liked it, though that bead had exposed vials, all but two have since been broken.


The fob I commissioned encompassed the vial, with four sets of three holes drilled, allowing the light to be exposed, but protecting the vial in its sheath of stainless steel. I was very pleased to see that its light, being a much bigger vial, was quite bright, and well exposed by the fob. It is certainly bright enough for me to pinpoint it in a darkened room, tent or in fact, deep underground whilst caving on a recent adventure.

The fob has a hole drilled through at the top, with which a necklace, be it link or a ball-chain to suit the wearer, or even feed a thin split ring through to add it to a keychain. The vial is securely seated and snug within the fob.

It's an elegant piece, rugged and functional in the same moment.
Probably the best part about it was how much Lorin enjoys wearing it, and consequently how much I enjoy seeing it being worn. Much like the SAR GlobalTool MoonGlow disk I wear, it is a great spotting device, without being obtrusive. With tritium, it's glow will last for years, no recharging needed.

Rhino Ropeworks  produces tools in copper, stainless steel, brass and even some in titanium. You should totally check out their Facebook for the most recent tools and designs, and watch this space for when my marlin spike comes in!

Review: Tribe Provisions - Go-anywhere Blanket

I managed to lay my paws on a prototype from the good people of Tribe Provisions, who have an ongoing Kickstarter for what they call their "Go-anywhere Blanket for Sports, Camping, Hanging Out" which is a very good summary of their creation, a multi-purpose outdoor blanket: comfortable, durable, machine-washable, and comes with a compact stuff sack.

It arrived in the mail just in time for our weekend away camping with friends. Perfect timing, and just what I needed. Triceratops Girl and Tactical Baby won't stay in chairs too long, so I needed options.

Its very mild camping in  Victoria at this time of year. The days get as high as the low 30's (33oC on Saturday, that's 91oF for all you Imperials)but the nights can get down to 6oC (42oF) or so, where we went, so I wanted to make sure that we had plenty of light weight blankets to add to the pile.

It a 172cm x 140cm (68" x 55") quilted nylon blanket, weighing in at 800g (1.7lbs) which comes in its own attached stuff-sack. I love stuff-sacks, and am always terribly sad when I have lost them in past. (Or rather, when I have loaded out a sleeping-bag, and it is returned bound in string, no stuff-sack to be found.) My Aurora Wanderer sleeping bag weighs 980g.
The machine washable ripstop nylon outer shell, which is overlaid above a strong, soft inner polyester shell for comfort.

Mildew-resistant hollow fiber polyester filler offers a variety of benefits; it compresses easily, retains body heat, dries quickly and as mentioned does not give organisms like mildew fungi habitat to flourish. 

With  double stitching at all the edges and seams, and a single quilt-stitched body to maintain durability and integrity, the Go-Anywhere blanket is built to last under the rough-and-tumble of outdoor use. 

My girls are not especially delicate, and romped about with it to no ill effect. The scattered bindi weed prickles at the campground we were at were no match for the Go- Anywhere, and in those rare moments I got to sit down, I found myself looking for my woobie!

My prototype model features a black and a grey facing, with the production versions being a green and tan to cream colour. 

I especially liked wrapping myself up as I lay in my hammock early in the day, before it heated up, as breakfast cooked, but also found that it was very comfortable to wear draped as a shawl, or wrapped around me as I sat on it. 

I'm a very long-limbed creature, so often have trouble staying all in a sleeping bag, so having the extra blanket option made for warmer nights too, when needed. You could even use the attached stuff-sack as a field expedient pillow, when stuffed with clothes. 

Overall I was very happy with the Go-Anywhere blanket. It has been well thought out and put together. It's simplicity, comfort and durability are its biggest assets, and it certainly performed as intended. If I had to add anything, I'd think that a set of compression straps to the stuff-sack, just to reduce its bulk. I'll probably do that to my prototype, and perhaps to my production versions too when they arrive, as needed; webbing and buckles aren't hard to come by in my house ... Check out the Kickstarter before it closes, and  the other kit that Tribe Provisions produce ...

Events: exoskeletons in the news and on screens

Ever since seeing the Power Loader in Aliens, and reading Heinlein's Starship Troopers accounts of the MI Cap Troopers powered suits, I've been fascinated by the idea of powered exo-skeletons and wondered when they would become a reality. The time is now.
I was shown this link recently, of Eythor Bender of Berkeley Bionics bringing two amazing exoskeletons onstage, the HULC and eLEGS. The HULC is a military power-loader type affair, made by Lockheed-Martin and is human wearable, assisting and enhancing a ground soldiers ability to haul gear and kit. The eLEGS from EKSO Bionics are designed to give paraplegic people assisted walking. Both suits have the same lineage and show how the technology we have currently available is moving.

Just this week the symbolic kickoff of the World Cup was performed by a paralyzed, previously wheelchair borne person wearing a similar suit. What makes this so significant is that unlike the HULC suit, and other motor-muscle actuated feedback systems, it was controlled by readings from an EEG cap that sends readable nerve of impulses to systems which then drive the hydraulics strapped to their legs. The system "reads the mind" of the wearer and allows them to, at this stage, stand from sitting, walk forwards and return to sitting.
I lost a friend to motor-neuron disease a number of years ago, and it was tragic to see this pillar of a man gradually loose every function but his wits. Something like this might well have helped him for a time. There are plenty of people with acquired paralysis, be it road-accident injury or combat related, who could benefit from this kind of suit.
We even have an example of this kind of thinking in the movies, in Elysium, where the protagonist is fitted with (albeit in a very visceral, literally bolted on medical way) an exoskeleton. Part prosthetic, part combat-accessory, the suits in Elysium offer a very realistic representation of how this kind of technology might develop, not unlike the visions offered by Cyberpunk 2.0.2.0 roleplayings Linear Frames and more recently the powered combat suits that feature in Edge of Tomorrow.

How might these fall into more common usage? Well, apart from medical recovery, and military operations, you could also expect to see this kind of technology in heavy industry, rescue and emergency services, any place that you might want either more power or stamina than a regular person might be able to muster, but less space or more maneuverable than a forklift, or with more autonomy than a wheelchair offers.

Imagine if the rescue workers at an earthquake downed building wore something like these? Firefighters at the scene of a 3-car collision? A trooper who took a piece in the back?
The real ticket will be how light they can make them, how long they will remain powered for and in the end, how much they will cost. There was a time when owning a car was outside the scope of most households, or even a wheelchair. The ReWalk is already a consumer item. Can't be long until Caterpillar bring out a bright yellow Xenomorph squisher...

We have the technology, we can improve it!