Showing posts with label Battle Belt. Show all posts
Showing posts with label Battle Belt. Show all posts

Tuesday, May 30, 2023

Review: CRKT Freyr hatchet

Its no secret that I am a fan of axes, or cutting tools in general

I never go camping without packing at least my Fiskars log splitter and even a long hike will see my Boker Tomahook in my belt because their general utility and suitability to the tasks commonly at hand  camp-side or on the trail. But a log splitter is big broad and heavy and the tomahook is light, narrow  and short. Not all tools do all jobs well, which is why when I saw the CRKT Freyr hatchet I was impressed enough to add it to my collection. 

The broad head of the Freyr is made from the robust 1055 high carbon steel, with a textured black finish all the way to the beveled edge. It features a hammer poll on the reverse face, which I prefer over a spike end for the utility of having a hammer on hand. I rarely have to puncture breastplates, oil drums or car tyres. I do, however often have to reset nails, screws, tent pegs and the occasional fence-post.

Another thing I liked was the significant beard which enabled me to fit most my fist behind the blade for good control and protection when using the blade for shaving or planing. 

This makes it very handy for camp-craft, making kindling for fire-starting and coincidentally, the top corners of the head make good striking surfaces for ferrocium rods.

The usable blade bit length is 12cm (4 3/4"), with a slight toe rising above the top edge of the hatchet, giving decent bite when embedding head-on, which i like to do when pausing in chopping or as a carry-aid when processing logs. 

The haft is stained Hickory, with a very nice grain and a smooth finish, a 42cm (16 1/2") overall length, with a slightly flared end knob for good hand indexing and retention when chopping. The head has been wedged in the eye and has two steel rings holding it all in place and stable. As the Pale Rider would say, "that's a nice piece of hickory".

Unlike the Tomahook, with its full-length tang, the Freyr maintains almost the full weight at the axe-head end, lending itself to solid chops regardless of how you hold it. The traditional bit and eye design broadens the tool for extra log splitting power, without adding significant extra mass or bulk. Topping out at 814g (1lb 12oz) its certainly a handy tool around camp on on the belt when adventuring. 

I have made a leather mask for it, to protect myself and the edge, which I secure with the leather strip when on, 



The balance point is just behind the tip of the beard, adding to its nimbleness in the hand. Overall i'm exceedingly pleased with this hatchet, it is simple, elegant and functional. It holds a good edge, the black finish keeps it rust and resin free. 

 I wouldn't say it has replaced my Fiskars logsplitter for its power and reach or the Tomahook for its versatility and tacticool appeal. 


Thursday, June 18, 2015

Review: Condor - Gen1 Battle Belt



This is my third Condor review.  I covered their Modular Plate Carrier recently, and had some good things to say about it, with a couple of caveats. My Condor Nomex gloves are still serving me well. Condor apparently gets a lot of stick in the high-speed gear community, but as a quite removed observer (damn you, Pacific Ocean), it's been hard to get a good picture as to why. I'm going to focus on what I see and feel myself. Both my Condor pieces are second hand, from a fellow who was getting rid of his excess collection.


This is the now superseded Gen1 Condor battle belt, which is still available out in the world, but Condor are promoting their newer Gen2 belt directly.

Adding to my growing collection of MultiCam, this 1000d Cordura belt functions in the way that must battle belts do, it is a sleeve type affair, and requires an actual belt to be fed through it in order to attach and wear it. I have fed my Propper 720 Riggers Belt through it. Internally, the battle belt has a series of webbing loops to snag and hold a belt in place, and fits up to a 2" belt easily. These loops keep a belt in place both in the donning and doffing process, but also when wearing it, to keep it riding right. The two front panels have openings in the bottom side to run a drop-leg rig off the internally threaded belt.

Four D-rings are set into the top of the beltfor attaching a harness or braces to.

The inside of the belt was lined with a breathability improving mesh padding, with two bands of non-slip backing. It was very comfortable to wear when empty, sitting on top of the hips and conforming to the curves of the body nicely.
Front View











The belt is surrounded by two rows of heavy webbing, 6 channels on the two side panels and 8 channels on the back. When you load the belt up, some things happen. Even with a fairly light load of a Platatac Half-Med pack and a WUP container, the belt sags noticeably.
Side view




















Back View
This sagging didn't really affect the comfort, or the fit of the belt, but does raise some questions about its stability under higher loads, when you don't want that extra weight flopping about when you are being physical.

I suspect this sag is due to the Rigger belt being suspended through the middle of the Battle Belt, rather than riding up at the top seam, but it seemed like a design flaw to me.

I wore the belt all through last Easter's Confest (2015) with the loadout as shown here, with a Nalgene bottle in the WUP, with my RhinoRopework Hornet and American Kami Super Colubris combo fed into the left-hand side belt opening. It was super effective, and I chopped wood, carrier Tactical Baby and ran around like a mad thing with no trouble keeping my wearables in place. I'd like to see how it compares to the Gen2 Battle Belt, but it stands up nicely against the Platatac Young Guns and Bongo Battle Belts.

Wednesday, January 29, 2014

Review: Platatac Bongo modular battle belt

It's been a while since I've covered a belt, and I picked up this piece recently, and gave it a good workout over the weekend, so wanted to tell you about it.

I've covered a number of belts before, from the surreptitiously tricky PM Leather Hobble Belt, to the hardworking 215 Gear Ultimate Rigger Belt, and the airport friendly 5.11 TDU belts as well as the very capable Young Guns Battle Belt by Platatac, so I wanted to show you this platform as well. This is the Bongo Modular padded belt (Mk2)


With 22 rows of PALS/MOLLE looping, 18 of which are 3 row, with the two channels beside the buckle being only double channel sets. This gives both a lot of real-estate to work with, but also narrows the form around the front, giving the wearer unrestricted motion when sitting, squatting or kneeling.

Designed to be ALICE compatible the belt includes 8 loops for direct attachment to harness or other vest system, such as my MAC armour carrier or the First Spear OAGRE.


It also sports 4 D-ring lash loops along the bottom, which could well be used for leg-straps too, if that's the way your mind works. The principle buckle is a large ITW buckle, as features on many of Platatac's gear. Twin webbing sliders allows you to adjust the belt from either side.

For my skinny (size 32) waist, I needed to cinch it all the way in on both sides, even when wearing it over belted pants and tucked in shirt. The up side of this is that if you have layered clothes, you will have no problem fitting it as an outer-wear layer.

I wore this out to an event, where is was doing First-Aid type monitoring, so fitted it out with my Half Med pack, a set of twin 40mm grenade pouches (they work really well as disposable glove/ mask storage, for quick access). I also fitted one of my SR25 pouches to hold my wallet, a Blackhawk removable side-plate carrier as a mini-dump-pouch, FUP pouch holding my Fenix TK-51 light, and also the SORD 870 Back sleeve, which I'm sneak previewing here. I didn't run it with a sword in it for the event I was at, actually had it filled with big cable-ties, but that's how I would like to roll... A set of CountyComm Premium EMT safety shears rounded it off.


Thankfully none of this kit was needed at the event, but the belt served me really well. The padding is mesh lined, giving it great weight bearing, as well as moisture management capacity.


I wore this rig just on my hips, no strapping, or braces, for 6 hours or so, including some running up and down stairs, with zero dramas. I would wear almost all the pouches identically, other then perhaps moving the 870 pouch to sit higher, if it was bearing more load, just to take advantage of the PALS/MOLLE attachments, but all in all, I was really happy with the belt. The webbing used for the buckles is sewn right into the body of the belt, wrapping the whole way around, and sits under the top. This made feeding the attaching straps of the pouches, both the Platatac-type integrated straps, and the Blackhawk STRIKE Speed Clips I use, a little tricky, but once in, they were rock solid. The overlap of the belt webbing and the middle row of channels makes it LOOK like its a staggered set of loops, but it isn't. Still, this adds to the stability and security of the belt! I might consider swapping out the ITW buckle for a Austrail Cobra buckle at some stage for climb-rating security, but otherwise this is an awesome addition to my load-out options.



Here's some obligatory tacticool shots of my load-out.



Saturday, December 31, 2011

Review: Platatac Young Guns belt & Braces

I thought it was time to cover some of my more martial kit. I have a saying, "when the going gets tough, the tough get MilSpec". Here is a piece that I've found to be very useful. I'm sure we've all had the less than ideal experience of having a belt load of tools and gear sagging and digging into your hips whilst you're running about, being very distracting. Distractions lead to poor survival outcomes. One way to avoid this is to carry less gear, which isn't really in my first choice.
The second option is a better belt. Here is what I've come across that fills that gap. Here is the Platatac Young Gun Belt.

This belt is filled with stiff foam padding and lined on the inside with a breathable mesh, reducing sweating and sticking. The outer is the standard Codura 1000d, which I chose in khaki, as usual. There are three bands of MOLLE running on the left, back and right giving ample attachment options, and I was especially interested to see that the back panel is made up of the loop side of hook-and-loop, for fitting to the internals of a pack, to act as a waist band. This kind of modularity really scores points for me and it is something I've come to expect from this brand. I used it as a place to put my Stargate LRP name-strip, and morale patches. The MOLLE on the left and right flanks also features an extra-wide attachment point,which is the perfect place for a drop-leg sling, or a holster, whichever is most appropriate.
The belt itself curves, tailored in a wide C shape, rather than being straight, adding to the ergonomics of the unit when worn under load, but something important to note is that this is an outer belt fitting, and doesn't actually include a belt to fasten it. However, any belt up to 50mm wide can be fitted through its middle and I used my old trusty webbing belt to secure it, with a piece of scrap paracord weaving as a fob (because I like having busy hands and don't like throwing away scraps.) I tend to use this belt as my "first layer" of kit carriage, with an entrenching tool (not pictured) at my back left, my drop-leg dump pouch from front left, and utility pouches and canteen on the right hand side.

One more excellent feature of this belt are the four D-rings that enable the fitting of the belt to either a vest or armour carrier, or to a set of braces such as the Platatac Combat braces. I was fortunate to get a set bundled in with my belt, after talking to the guys in the shop, and after some time spent fitting and adjusting (as I have a skinny torso, and the braces would easily suit a large manly man) I got a setting that was comfortable enough to wear long term, even with quite a load on the belt.

This is really touch and well put together piece of kit. I'm really satisfied with this set as a load bearer, and good for keeping my "first layer" gear together and on hand, be it for LRP, wilderness adventure or responding to a disaster!



Related Posts Plugin for WordPress, Blogger...