Review: Altama Tan Desert MilSpec boot

 

Pristine boot pic, lifted form Altama's website. Mine are LONG since wrecked :)

I thought I should give my trusty boots a fitting send off. I've worn Altama Desert Boots for a number of years, my current pair having been with me since at least 2005, when I was taken out bunny-hunting and have stains from that event that I never buffed-out.

I've worn these extensively during the hot half of the year here in Melbourne (I wear boots all day, every day, unless I am barefoot) and have never had a complaint with the fit or function.

From the ground up, the Panama pattern Mil Spec Vulcanized Rubber has been grippy on road and rough terrain, I really like the Panama patter, it sheds mud, gives purchase when clambering and wears well.

Over the sole, is a heat-barrier, to keep the burning-hot sand, rock and road from radiating up into delicate feet, and is topped by a removable cushioned polyurethane innersole. I had to replace mine a few times, just because of the amount of wear they got. Inside the boot is lined with Coolmax® aiding in wicking and keeping my feet dry and comfortable. The outers are a combination of tan suede and Cordura material, and the boots top off with a padded collar, maxing out at 9" high.

The boots have a nylon coated brass "Speedhook/Eyelet" lacing system, which really performs well, reducing snags and aiding in speedy lacing, even when I put these paratrooper/ ladder laces on them. These were the boots I wore whenever going camping, doing Stargate Lasertag LRP, training for and running the Tough Mudder, and recently, the Stampede. Even prior to the Tough Mudder, they developed a tear down one side, which I attempted to patch, but alas, the conditions of the events and the amount of pounding they got have finally spelled the end for this beloved set.

Compare the "as new" pictures with the tread pattern wear, and you'll get an idea of how much use these boots saw.

These were great boots, but now they are destined for the Happy Hunting Grounds, and I will be on the hunt for a new set of boots. Any suggestions for summer-boots? Or should I stick with tried and true?

Events: Stampede Run

I've talked quite a bit about my training and get-up for Tough Mudder that I ran in May 2012, and I think I got the bug. I also challenged myself to the Stampede.

The course was divided into a 5km run, and a 10km version (splitting off at the 5km mark, and rejoining for the final few obstacles.

The Melbourne 2012 run was held at the the Glenbrae Equestrian Centre in Wandin, and made good use of the site and facilities.


Under and Overs - log crawl and climb
Rope Tango - mud crawl whilst pinned down by a cargo net
Human Window - climb though odd shaped holes
Wrecking Yard - crawl through, over and on top of wrecked cars
Ice Bath - wade through and dunk in an ice filled pool
Bus Stop - climb over cargo netting up and over a bus
King King - big pile of tyres
Spiders Web - climb through a stand of trees wired with bungy-cord
Giant Slip and Slide - a long, long water slide into a pond
Trauma Tunnels - Crawl through piping and squirm through flat plastic sheeting
Sand Blast - do a circuit with a sandbag
Quick Step - run through flat tyres
Hay Stack - climb over giant rolled hay bales
Devils Cave - a darkened shed with falling water, and hay bales
Cable Chaos - climb over a series of stacked cable spools
Gladiators - run past a gauntlet of pugil-stick and boxing pad armed opponents
Tunnel Under - climb through tunnels
Dumpster Jump - climb in and out of a set of dumpsters (one with apples)
Half-Pipe - Scale a high sloped ramp
Sunday Roast - run over fire
Mud Buffet - crawl under barbed wire through mud
Bug Zapper - dangly cable filled hall some of which running with 10,000V!
As well as these, there were numerous stretches of thick, gluggy mud. and wading through murky ponds, and the occasional equestrian hurdle.

copyright to Supersport Images Pty Ltd  

This is my taking a leap over the bonnet of the last car of the Wrecking Yard. It was obstacles like this, and the crawling ones, that made me choose to wear my BlackHawk! Advanced Tactical Knee Pads v2.0 I've had these for a while, and they have done good service, although I have skinny legs, and found that they did slide a little being on bare skin, when I was crawling through mud-filled tunnels. I wouldn't have wanted to go without them though. Wearing suggestions anyone?

copyright to Supersport Images Pty Ltd   

This is me wading through the barrel filled dam, I wanted to give some of my other kit a good solid workout, and opted to go with my First Spear OAGRE vest, that I got from the folks at LEGear. As well as being well fitting, and totally as rugged as I have previously reported, I found that the belt-ties ensured that I didn't have to worry about my shorts coming off, and gave me some significant rash-protection when rolling over and crawling through obstacles. I also ran with some patches: A TAD logo Ranger-eye, I also wore my Stargate LRP nametape, to see how that held up and my ITS "Crew Leader" Tab. I pinned the Stampede ID number to the MOLLE, rather than using the sticky label, knowing the challenges it would be facing. On the back of the OAGRE I laced my "Zombie Control Officer" laminate, for a bit of fun, which got a lot of cheers as I passed folks, and the Tough Mudder patch on the back, under the drag handle. The 3L Source bladder that came with my Platatac Bravo pack fitted pretty well inside the OAGRE.

I also changed what I wore on my hips. Lesson learned from Tough Mudder earlier in the year. As awesome as my Survival Utilikilt is, it is not optimal attire for an endurance obstacle course like this, which is why I was so pleased with the new addition to my clothes-pile, in the TAD Gear Amphibious Cargo Shorts. As they were new, I didn't want to risk running-rash, and wore some boxers under them. Useless, they waterlogged and sagged. I would have been better off going my usual commando. Great shorts, fast drying and mud-shedding, comfortable and good for adventure!

copyright to Supersport Images Pty Ltd 

I opted for a hat over sunscreen, which gave me somewhere to mount my Contour GPS, in its waterproof casing, as well as keeping my hair out of the way. I wore my Platatac Tactical cap, which also somewhere to out my MSM "Zombie Hunter" patch. The Contour in its case assed quite a bit of asymmetric weight to one side of my head, I think mounting to a chin-strapped bump-helmet will be my next option. I also wore my Headsox scarf-tube, which helped keep the sun off my neck, keep the vest from chafing and also as a smoke filter.

I wore my Platatac Punisher-Skull logo CUS shirt which was a dramatic improvement in comfort over the Jackeroo safari shirt I wore for Tough Mudder. It dried, it breathed, it wicked, and was pretty bad-assed to boot!

I kept my delicate hands safe from harm with my trusty Ironclad Landscaper gloves.

So here I am at the end of the race, having crawled under barbed wire covered mud and been shocked by electricity over and over. I wore my much abused Altama Tan Desert Mil Spec boots, veterans of years of summertime wear, Stargate LRP and the Tough Mudder. This may have been their swan-song.

I did the 10km course in just under 2 hours, keeping a pretty constant pace. I'm not fond of running, it hurts, but I managed to jog pretty much the entire course, giving aid to people who needed it, and taking my time. I loved the obstacles, was happy with my effort, and the little preparation I did to be ready for it. Since May, I've gone for perhaps 4, 8km runs at lunchtimes at work. I feel that I am able to get from A to B in good time, regardless of the obstacles in my path.

Review: EcoFuture - BioDefence Athletic Foot Shield

So a while back I showed you the alcohol free HandSan spray that I was sent samples of, and from the same folks at EcoFuture, here is an equally useful product, which may touch the heartstrings of some of you. This is the BioDefence Athletic Foot Shield, which is a food-grade organic-compound based, alcohol-free prophylactic spray for feet. As someone who wears boots all day, pretty much every day (I don't actually have any shoes that aren't boots anymore, apart from my sandals) I occasionally suffer from athletes foot which is itchy, annoying and unsightly. In its extreme stages it is debilitating.

This is NOT something you want in a survival situation, especially if you have been spending a lot of time in your boots, trudging through mud and wading through dirty water. My last big bout was following the Tough Mudder, and this product really sped up my recovery, I feel. The active ingredients are a mixture of organically derived materials including: flavonoids such as the Vitamins A, B3, C, D, D3, and K2 and Ubiquinol . More details can be found on their product data sheet including bactericidal and fungicidal testing  performed.

They key thing however, is that it a topical spray, applied before booting-up, that acts to give your beleaguered skin a fighting chance.

Review: Hill People Gear - Runner Bag

So, once in a while, I manage to make one of my "wish-lusts" come true. Such was the case with the Hill People Gear Runner pack.


I got in touch with Evan Hill, of Hill People Gear, because after my Wish-Lust review, I saw that they had a single photo of a bag in khaki, my preferred colour, where as the rest of their range seemed to be "coyote", "foliage", "Ranger Green" and MultiCam. Evan let me know that the khaki one was a prototype, and that apparently khaki gets a bum-rap at the moment, but that he would cut me a deal. A deal I jumped at, and a couple of weeks later.... my very own Runner Pack arrived in the mail!


I've been wanting to give it a thorough try-out, but have been struck with a nasty respiratory infection of late, and combined with my previously damaged ankle, has not given me much incentive to go running. What to do? I took it to Comic Con Oz, of course!

Without wanting to re-hash the content of my previous post about what its made of (500d Cordura) or how its all put together (well) I thought I'd just run you through my load-out, and how it handled.


Firstly, it was really comfortable to wear! I swapped out of my EDC holster harness some bare essentials: my wallet, my iPhone, my keys, and threw in a couple of extras, like my birthday Tactical Pen and my favourite personal grooming tool Because one never knows, Stan Lee might have wanted to look good for our signing and photo-op!


This left a little room for Tactical Baby snacks, and maps, tickets for the event, whilst not bulking up too much on my chest. I was curious to see if there was that feeling of compression that chest-rigs can give when laden, but I found no such dramas. 


With some quick on the spot adjustments I was able to go from riding high and tight, to dropping it to mid-thorax which gave really different access and feel to wearing the rig. OK for walking, but running I'd still wear it up high. One thing to note, I felt quite conspicuous wearing it. It really does look like a chest-rig of some kind. If I were adventuring, hiking, or running, I'd not have given it a second thought, but I couldn't help but feel slightly "half-dressed" in the cos-play crowd. Later that afternoon, I wore it slung sideways (pouch under my left arm), which looked a lot less "chest-rig" and a lot more "man-bag". Again, no real issue, and it felt great, but something to be aware of in polite company perhaps.

As I've said though, it wears like a dream. The mesh-back is soft, and breathes wonderfully. The padded back of the pouch was both soft and breathable as well. The zipper-pulls worked perfectly, although I think I need to practice the "quick-draw" of the back compartment, if I want to be able to get my comb out in a hurry... The front pockets held my wallet and phone snug and easily accessible, yet securely. The back compartment -almost- fits my iPad. I think i could probably jam it in there and man-handle the zippers closed, but not without risking popping stitches. A pity, but I doubt that Evan was thinking of how to carry his iPad around when he designed the pouch, he strikes me as more a M1911 kind of guy ... The shock-cord retention strap is brilliant, really held the bottom of the pack stable, without constricting my chest at all. A real bonus.

The only gripe I had at all was the edges of the very clever double sided Quick Clip the stabiliser shock-cord was mounted to the pack with (pictured here) were quite sharp, and jabbed me all day. A quick lick of a lighter to heat the thermo-plastic and a thumb pressed to the edges rounded off these offending edges to protect my delicate flower-like body. The Fastex clips, large and small were perfectly placed for ease of use and wear.

This is a really versatile pack, and I can see myself getting a lot of use out of it when I get ready for next years Tough Mudder, or when I go adventuring, either on its current harness, or taking advantage of the forward-thinking modularity that Hill People Gear built in, and mounting it via those GrimLock clips, as there are loops top and bottom of the pack to accomodate those.

I'm really pleased with this addition to my collection, and look forwards to going running or rollerblading with my man-bag, now in khaki!

Review: Under Armor shirts

I came away from Tough Mudder, with a congratulatory head-band, and a celebratory t-shirt, from their sponsors, Under Armor . As I staggered around after completing it, trying to find my team, I wandered past the merchandise tent and had a look at what they had going, and saw another design that caught my interest. As it turns out it was another Under Armor shirt as well, so I came away from the event with two. Since then I've worn both, a couple of times and have been very impressed, so thought I might share my findings with you all. First of all, I should mention the fit. The general philosophy beneath Under Armor seems to be that they make close fitting garments in order to keep maximum contact between the wearers skin and the garment. This makes sense when you consider the material used is pitched as having their "Signature Moisture Transport System" which wicks sweat away from the body, keeping you cooler and drier. I did a little searching to find out what material they actually use in the shirts.

The best guess  I could find was "63% Nylon, 23% Polyester, 14% Elastane" blend, which would account for the "ultra-durable 4-way stretch woven fabric" that is reported by the manufacturer. Both the stretch and wicking are dead on the money, and whilst I happen to choose a looser fit, mostly to give me torso a bit more "body", I have really appreciated the "give" that the elastic fabric has. It is very comfortable to wear, and certainly gives the impression of being hard wearing and functional. One of my two shirts is in their "Loose" fit, the other "Regular" rather than either "Fitted" or "Compression"but both shirts are from the "HeatGear" range, which are stated as suited to temperatures between 75-100oF (which is 23-38oC). As well as being wicking, the shirts are light, and breathable, which no doubt is part of the design of this range, but is also reported to be 30+ UPF (blocking 96.0 - 97.4 of UV light), impressive for such a light, and light-permeable fabric. Being both an anti-pick and anti-pill material, I expect these to be very hard wearing shirts.

UA's website purports "anti-odor technology" which prevents the growth of odor causing microbes, keeping your gear fresher for longer. I havent yet worn one of these shirts for long enough for that to have been something I can test, yet, but I think that I'll be wearing them a lot in future adventurous endeavors, both as a base-layer, a solo-layer and I also intend to wear them as named, under armour! My regular readers can expect to see me doing my best "Operator" impersonation in upcoming costume events, and I've worn these out clubbing, where I don't mind showing off perching, striding about or dancing my tail off. They certainly saw me clear camping over Easter; cooking, chopping and tenting...

One caveat to this is a message that UA themselves put out there: "WARNING! This product will melt when exposed to extreme heat or open flames, posing a risk of serious injury where melted product comes into contact with skin!"

So, not to wear fire-twirling, volcano spelunking or dragon slaying; CHECK.

Review: Jackeroo Shirt

My recent foray into Tough Mudder gave me a reason to break out my safari shirt: Our Team, the Funk-A-Mentals had a 70's theme, and my best offering to this was this khaki safari-shirt, by Jackeroo, the same people who brought you the Hooded Vest I reviewed previouslyy. This was also a Giftmas present, same year, same batch. Made from a fast-drying nylon outer and polyester liner as the vest, and hardy stitching throughout, this is a durable shirt, that just happens to look like it fell out of Jurassic Park. I don't mind that at all, and happily wore it to work on a number of occasions.

One of the great features was the pectoral pockets which fasten with hook-and-loop and have an internal pocket on the left side as well. This was sufficiently well closed to withstand the Tough Mudder mud, water and crawling around, and not loose my spare Contour GPS battery. It also features a extendable fold-up collar, for those times when getting a sunburnt neck doesn't appeal. Another interesting and well placed feature is the mesh lining around the shoulders, and vents under the arms. I found that in an urban setting, the material actually made me a bit sweaty, whilst out and about in the wind this wasn't nearly as much of a problem. Somewhere along the line the shirt picked up a weird blue stippled stain over one shoulder, which reduced its work-wear potential, and I popped a button adventuring. These things made it an ideal piece of clothing to put through Tough Mudder. I can tell you, that is a pretty harsh test for clothing's durability.

I saw a lot of discarded gloves, shirts, socks and trail-packs. I wasn't planning to discard anything, though at several points as I was caked in an inch of mud over my entire body I did feel like shedding layers just to drop that mass. However, the material of this shirt sloughed off the mud fairly easily, didn't get snagged or hooked up on any of the obstacles, be it the Berlin Walls, trench crawls or cargo nets, and once I got to running, dried speedily and broke the heavy headwind nicely. The sleeves were cut such that I could do all the crawling, climbing and scrambling I needed to without hindrance.

As you can see, it got fairly cruddy, but after a couple of washes, it was as good as new. Or at least, as good as "before Tough Mudder". If K-Mart still stocks these, I'd be strongly considering picking a couple more up, in long-sleeve, to add to my adventure-wear.

Review: Contour GPS

So some of us may think that we have our priorities straight when it comes to disaster preparedness and response, we have our EDC squared away, bug-out-bags filled and stowed, pantries stacked and indexed but here's the thing. When people (and by people I mean the people I see doing this online, on the news and myself...) see something heavy going down, they often whip out a camera, take some snaps, maybe film some to go up on YouTube and then deal with the situation however they may. There are those who go out of their way to see exciting thing up close and personal, and when they do, sometimes having your hands free to deal with the situation is more important than getting it fully in frame with the right aperture settings.

For those people (myself now included) there are the helmet-cams! These little, robust cameras are designed to be strapped to ones person, their kit, or whatever, and give you an "I was there view " of the action they put themselves in the way of. Here is my review of the one I recently purchased and put through its paces. This is the Contour GPS. This little nugget of technology houses a 135o lens, and will capture video at 720p at 60 frames per second or 1080p at 30 frames per second. It will also take continuous stills and has some smarts to auto-adjust for lighting conditions. It features built in GPS and has a Bluetooth option. The Bluetooth option allows you to configure the cameras settings, and check the alignment with your iThingy acting as a viewfinder.

An omnidirectional mic allows the sounds of the action to be recorded too, and its gain is also adjustable to cut out high-speed wind noise. The body of the camera is a well machined aluminium tube, which houses all the electronics, the GPS antenna and the Bluetooth card slot. The lens is centrally located and is built into a 180o rotatable swivel, to allow you to mount the camera and adjust the angle of its capture. Twin built in laser-sights allows you to level the picture as there is no view-finder, or any display options internally. The removable battery is USB rechargeable, and the micro-SD slot takes up to a 32Gb card. There is a toggle switch to move between pre-set setting options.

The case is marketed as water-resistant but it is NOT sealed, the end cap is plastic, which slides and locks into place but it by no means watertight, or even dust-proof. That's not to say it doesn't fare any worse than other camera battery-covers, but not what i'd hoped for in an otherwise rugged camera. So, i also bought the waterproof case. which is rated for dives up to 60m deep. It latches down at the front, and has a magnetic induction slide-switch to operate the camera (only works to turn it ON, with mine though however ... very disappointing bug). The back-cap is the Achilles-heel of this device.



Both the waterproof case and the main camera share a rail-attachment system, that allows for a number of kinds of mounts to be fitted. The camera comes with an adjustable goggle-strap mount, and two adhesive "flat-surface" mounts. that slide and lock into place along either side of the camera. I've mounted this to the side of my kendo men helmet, to the shoulder of my Platatac Bravo hydration pack and so far have managed to only get a few "straight" shots. Learning is part of the fun. What ISN'T fun, is the difficulty I've had getting the camera to actually film when I want it to. There are four sets of indicator LED's on the main body; a battery indicator, a memory indicator, a "status" indicator and one for "recording". Between these, and the press-button power button, and "slide-to-record" switch, you'd think someone tech-savy would have a breeze getting it going. Not so much. The combination of "press-and-hold" and "secret extra un-labled button" make for a clumsy system that requires getting used to before you capture that big exciting event. Like several hours of laser-tag, (which I missed the exciting parts of) or some good kendo footage (also didn't record when i thought it was...)

I did however get several hours worth of Tough Mudder footage, which although askew by about 30o due to how I mounted the camera, and required a battery change "in the field" to get a total of 5 hours of the 5 1/2 hours I was doing the challenge, and am really impressed with how both the camera and waterproof case held up.

So, clumsy user-controls, and non-water proof body aside, this is a fun toy, and I plan to film a lot of things with it.

Review: Platatac Bravo Hydration

With the upcoming Tough Mudder Australia event this weekend, I wanted to show you one piece of kit that I've been using, both for preparation for this, but also on my Stargate Lasertag LRP events, as well as a good solid piece of outdoor and adventure kit. This is the Platatac Bravo Hydration System, which is coupled with a Source WXP 3L Bladder. This was an item that I managed to put on my wish-list, and was lucky enough to receive. I've always been fond of keeping fluids on me, mostly with my combination of my SIGG bottle, which I've reported on, and carry in a FUP pouch everywhere I go. However, sometimes it's more practical to sling all of that onto a backpack, rather than hanging off a belt, especially if you're going to be away from reliable water for a while, or know you'll be doing some hot hard work. That's where a bladder reservoir comes in so handy, especially if they are well made, and carried. That's where the Bravo comes in.


As with all the Platatac range, it's made from the 1000d Cordura, and features a 4 channel, 6 row battery of PALS/MOLLE attachment points on the back, as well as 3 nylon D-clips on the sides of each ventral edge. These are great for either attaching the pack to another piece of gear, like a pack or plate-carrier, or to sling shock-cord through to attach items to the Bravo itself, like a poncho, or the like. The Bravo also comes equipped with a reinforced drag-handle, with hook-and-loop for nameplates or the like and also a hanging loop, which I've found very useful. As you can see from the side-profile, the pack itself expands quite a lot, and there is in fact room for an entire second hydration bladder, should you so desire, (remembering that 1L water = 1kg!) but it also means that there is room within the pack for other things (be sure not to pack anything pokey though!). You could also use the D-clips to use shock cord to compress the pack, keeping the load snug and secure, and adding some water-pressure, but I haven't had any concerns with this.


 The "front" of the pack looks like front side of most backpacks, with a couple of exceptions. As well as the usual Fastex clips and webbing loops, a couple of D-Clips and a sternum-strap for stability (which also includes a signalling whistle in the clip, nice one Platatac!). The backing of the Bravo is a moisture wicking-mesh, and features a drainage grommet. The zipper for access to the insides of the pack is on the "inside" and can be seen as the big curved arc at the top of the pack here. There are ports for the hydration tube at either shoulder, and large squares of hook-and-loop towards the top the shoulder-strap gives you more control over the placement and movement of the tube. The wide mouthed screw opening of the bladder fits snugly into the dorsal side of the pack, and is totally removable.

The Source bladder that came with the Bravo is all kinds of awesome as well, featuring their TASTE-FREE™/BACTERIA-FREE™/CARE-FREE™ Grunge-Guard™ System which basically equates to a easy to clean, easy to maintain, and nice to use bladder and drinking tube (which is in itself covered in a woven tube, for protection, UV resistance and insulation). The mouthpiece is angled 90o which means it is easier to use, with less cod needed to get it into your mouth, and features a really good drinking valve. Both the mouthpiece and tube detach from the bladder for ease of cleaning, with spill-free valves built in, and the bladder itself has both a wide mouthed screw opening and a fold-and-slide closure too. I had some misfortune with my first bladder, after not reading the care-manual, I rinsed it out with hot-hot water, which somewhat melted and warped the bag. DON'T DO THIS!

I'm really pleased with the Bravo, and the Source bladder Platatac paired it with. Its been out adventuring with me a couple of times, and will be getting a serious workout this Saturday at Tough Mudder. Wish me, and my gear, good luck!


[EDIT]

I survived the Tough Mudder, as did my Bravo! I really appreciated having a source (har har) of hydration along the way, and it also gave me a good platform to run my Contour GPS off (although running makes the footage a bit jiggy).

The pack stayed snug to me as I ran, crawled, slid, swam, climbed and trudged my way through the course, was barely noticeable as far as wear and rubbing is concerned and the tube system was really convenient. The mud-cap worked really well, and hardly any muck got on the mouthpiece, even when I was caked with almost an inch of it to my whole front. I saw a lot of discarded hydration systems, mostly cheep looking ones, Camelback being the only name I recognized, but there was no way I was going to discard mine! One thing I noticed, the wide-mouth screw-cap leaked a bit. Should it have an o-ring in it? Maybe Platatac can let me know if I've lost mine, or just didn't screw iit down tight enough.

Review: Utilikilt

I've covered a pocket-covered vest before, but also wanted to give some time to one of my favorite pieces of clothing. I've worn kilts since i was about 7 and my folks had one made for me when we lived in the UK, in our family tartan. When I "came of age" and they said I should get a formal suit made up, I instead chose to get my dad's kilt, and Prince Charlie vest and tail-coat made. Years passed, and I came across the wonder of the Utilikilt, and was in love! These hardy and ready to rumble kilts are made in Seattle and what they lack in traditional styling, they make up for in spades with utility! Five or six years ago for my birthday I was gifted one of their most option-laden models, so here it is, the Survival Utilikilt .

What is consists of is a heavy duty press-stud closure kilt, made of a pretty hefty 9 oz 100% cotton twill. The press-studs affix the two ends in a very secure 'V' in the front, giving ample security to the front, and even takes into account belt loops, which are doubled at the closure point, a great feature. Twin deep internal slanting pockets give a "pants-like" place to stuff your hands and gear. A pair of elastic-gusseted side-saddle cargo pockets. There are in fact two pockets, one shallow, the other deeper, (these are also detachable, and each comes with its own closure flap and belt loops.) The back of the kilt features two standard sew-on pockets, but are just as awesome. Pockets on a kilt, brilliant! A key clasp on the front gives an attachment point for keys and lanyards, which I use to sling a lanyard from my multitool .


One feature that really stands out and puts this back in the realm of survival-wear is the addition of a "modesty" closure system. A simple toggle and loop setup affixes the two front flaps at the middle, and keeps the two fold from opening under any weather circumstance. No risk of wind lifting up one side to flash the civilians. There is even a button hole on the back side of the kilt, so that in a pinch you can bind the front and back together to give a loose-shorts effect for those times you -really- don't want your undercarriage exposed, like assaulting a barricade, climbing over burnt-out cars or vaulting fences.


Utilikilts have several other awesome models, and the orange one above is one of them, this is the Workmans Utilikilt which is made from a beefier 12 oz. 100% cotton Duck cloth. This kilt was designed with construction workers in mind and as such features places for tape-measures to clip,and two riveted-on multi-chamber saddle pockets with pouches for kids of items. “The Grip” adjustable side hammer loop, which fixes with internal press-studs and provides a really good attachment point for hammers, tools, holsters and the like. My FUBAR fits really nicely on it. Again, this kilt features twin pockets at the back and also comes with a "modesty" closure system of a couple of internal press-studs to close up the pleats and make a set of quasi-shorts when the need arises.

Both these kilts are rough and ready, rugged and hard-wearing. The black Survival has faded slightly, but gets a lot of wear. The orange Workman is quite stiff, but that comes from being such a heavy fabric. I feel I can depend on them to take whatever I dish out to them, have worn them whilst camping and adventuring, and will wear one of them to the Tough Mudder at the end of this month.

Here's one last pic of me in my -other- Utilikilt, a more refined office-wear version, the  Mocker Utilikilt in olive green,after a week in the office, going to see the Sisters of Mercy play, sporting my Zombie-Tools t-shirt.