Review: AquaYak - Aqua II tandem kayak

A little while ago, I showed you all the AquaYak Snapper-Pro, that was loaned to me by the good folks at AquaYak Kayaks. A couple of months ago, I saw that there was a sale going on at AquaYak, and we took the plunge (so to speak) and went out to check out the showroom. It was the tandem's that had caught my eye, both for load-hauling, but also for family-moving purposes. We settled on a Aqua II tandem, in their Granite Spa colour, with a full load of accessories.

Tactical Baby promptly claimed is as "MY BOAT"

The kayak is a direct extension from the Snapper Pro, just bigger.

It features the same scupper hole and circular storage hatch system as the Snapper Pro, giving self-draining capacity to each of the two, deeply molded seats which as well as adding stability, and having their own mounting points for the padded fabric comfort seats, also feature the molded foot rests, drink holding wells (between the thighs) and anchor point for lashing dummy-cords (between the calves).

The central storage hatches had bags fitted, so your personal items don't get lost in the hull-void.

Fore and aft hatches, are the main structural difference between the Snapper Pro and the Aqua II. These hatches are held in place with a clever shock-cord mechanism, and can be unstrapped and opened with minimal effort, without being a loose or an accidental release risk. These open directly into the hull-space, and afford a very spacious cargo storage area, if you first consider the width of the openings. Stuffable packs and items will work well, but larger items might need to ride on top.

I found that I made use of the Grab Lines, which are mounted by brackets running all around the hull, for both maneuvering the kayak about on the land, as well as for giving Tactical Baby and Triceratops Girl places to hold onto when they were riding with us. As part of our deal, we bought a family's worth of life-vests including a red and black and  coyote/OD Stormrider YAK PFD for the adults as well as lurid red and yellow kid and toddler sized ones (which I will cover later). I also got several 10L dry-bags to go in the hull, and scupper plugs, to reduce incidental water splashes. 

You can get an idea of the depth and size of the two fore and aft hatches with this shot of my arm, along with the padded seal that makes up the inside of those hatches.

The same propriety 'alkatuff polyethylene' material, which holds a UV certification for maritime plastics, is used to make up all the AquaYak hulls, and whilst I have noted that my dragging, and beaching has scored the keel and sides of the hull, its all cosmetic, and a very tough, resilient material. 



At 3.8m (12.5") long and 0.9m (just under 3") wide at the beam, and weighing in at 30kg, it is quite a bit larger than the Snapper Pro, and harder to man-handle when out of the water.

At 30kg it is not all that to lift, but the size of it makes it awkward. The two sizable heavy-duty handles at the bow and stern make for easy lifting and hauling, even when fully laden with safety gear, seats, paddles and even the occasional squealing child. I've dragged it up a grassy hill by looping some webbing through the front handle. Wheels might well be in order (and AquaYak offer them)

In the water, It handles really well, thanks in part to having two sets of paddlers but is very operable with only one, even being quite maneuverable when solo.

We've it out on The Bay a number of times, and whilst its bulk means loading it onto and off my vehicle can be a pain, once its in the water , it is a lot of fun.

With a stated carrying capacity of 200kg, even with two adults, and two kids riding, unencumbered by gear, we've ridden very high in the water, and have had little trouble staying course, and upright, even on our first trips, are probably largely due tot he great design, including this tri-keel, which helps with tracking and stability, even in the moderate swells we've encountered.

I feel that if we needed to get off-shore, as simply as possible, this is a real option for us, both is speed, and limited cost. Get it on the vehicle, get to the beach, onto the water, and away ... Load it up with MALICE 2 pack, a Platatac Light Field Pack, and supplies in Dead People Jars, we could have quite the getaway. 


We put the kids in their Mudlarks All-In-One suits, to keep them warm and dry, with the PVD vests over the top, and went for a paddle one sunny spring afternoon, having been visiting with friends.

You can see that there is quite a bit of room the in the kayak, and we have found that the kids can site between our knees as we paddle, but that space could just as easily be full of packs and supplies. This is the saem beach as I reviewed the Snapper Pro, with a high grassy hill from the carpark to the beach. The weight of the fully laden kayak, over grass, down a hill was no issue at all. It even maneuvered well.

Once down at the waters edge, it was a simple matter to alight and shove off.

You can see here how high on the water we were, and whilst heading right into waves gave us some spray, we were a long way off ever taking water over the side and into the cockpit. I think we could have laden the hull with a lot more kit, and still have been positively buoyant and dry.

All in all, I am really pleased with this acquisition, and plan to spend a bunch of time on The Bay over the summer, as well as trips to local lakes and rivers.

I heard recently that AquaYak are going to stock a Windpaddle sail for their kayaks, and that is a great idea...

Review: Fenix - TK-51 light

I had the good fortune to be introduced to Braent Hong,
Asia Pacific Sales Manager for Fenixlight Limited at the SSAA SHOT Expo by my friends at LEGear Australia and made an impression about my love of all things lighting.

He recommended I contact their marketing department, and sign up to be a beta-tester, and after many month of negotiations, I received this pre-release TK-51 model light. This is a BIG light, and it certainly performs.Here it is stacked against the HexBright crowd-funded light, I have covered previously.

Let me tell you about the TK-51 ....
At 18.8cm (7.4") long and having a grip diameter of 4.8 cm (1.9"), and weighing 430g without the batteries, this is quite a serious hand held light. At the buisness end, it features two  Cree XM-L 2 (U2) LED's, in a tear-drop configuration of reflectors.

The body of the light is made of machined aircraft alumiunium, Type III hard-anodized and features a toughened and anti-reflective coated glass facing. The two Cree LED's sit in differing reflectors, one large and deep, the other quite shallow. Both reflectors were mirror finished. The glass was in-set from a smooth lip.

The tail-cap was crenelated, and two of the opposing crenelations feature a strap hole for securing a lanyard. The tail cap unscrews to expose the battery holder, which is well labeled to ensure that not only the battery holder, but the batteries themselves are properly loaded, avoiding any misloads.

Speaking of batteries, it is designed to take three 3.7V Li-ion 18650 batteries, which for those who don't know are the big-brother of the CR-123A batteries becoming so prevalent in the resilient gear market. It will also take six of the CR123A's in place of the 18650's, and even the 3.2V 16340. In the absence of a full load, it will even operate with one or two batteries alone, but at much reduced performance.


the TK-51 has some interesting controls, with individual controls for the spot and flood LED's, which ramp up from Low, to Medium, Medium-high and High modes, each accessible by a tap of the appropriate control. It also features a memory, such that the on/off button will recall the previous settings for both LED's. Momentary Strobe can be produced at any time by holding either LED controller, and cycles between two distinct flash frequencies. Momentary "TURBO" mode is achieved by depressing the on/off button, and gives full power to both LED's. Which is a LOT.

Each LED has a Lumen output of 10, 150, 400 and 900. This effectively ramps up with a button press for each LED control, offering considerable control of light output for the user, given their need. with a Single LED runtime, running from 420h at Low for a single LED, to 1h 45min for both LED on high, there is also considerable operational variety. I found that the buttons were perhaps -too- easy to press, being raised from the surface, and had a very light pressure needed to activate.

Fenix state the beam distance is effective to 425m, with a peak beam intensity of 45200 cd. Put simply, it packs a whole lot of light, and can throw it a long way.

This shot is of the TK-51 with both LED's at high, in TURBO mode, putting out 1800 lumen, and lighting up my whole street. I angled the spot down, so as not to side-blind passing cars at the end of the road.

Low Flood

Low Spot

The low flood and spot were hard to catch on my iPhone 5s, but the reflective paint of my old car glinted well enough, remember, this is 10 lumen

Medium Flood

Medium Spot

The medium options, at 150 lumen match most over the counter service station and supermarket lights that I've had. My trusty "household blackout light", the 5.11 ATAC-A1 is only 103 lumen (but off a single AA) .

Medium High Flood

Medium High Spot

At Medium High, the TK-51 is putting out 400 lumen from each LED, doubling that of my CR123A powered Surefire 6pX.

High Flood

High Spot

At High, the LED's are outputting 900 lumen, which even outstrips my HexBright FLEX, and is just shy of my new car headlights. On top of that, the built in circuitry has both output lock-out, meaning that it will produce the same light output for as long as the charge allows, then drop to the next level, and so on, rather than dimming gradually. At the lowest power levels, the light will blink its LED's three times as a last-ditch indicator of power loss. There is also overheat protection, which down-shifts the output until the light cools. During my use if the light, the finely machined texture on the grip was good in the hand, and the light had surprisingly good balance. I hate to think what it would feel like wielded in anger.

Combined with the mass of the light, its 1m shock resistance, and IPX-8 (2m) water resistance, this is a serious light, for serious use. I bought rechargeable batteries for it, and a charger, which comes wit ha car-adapter, which I think will greatly expand the use I get from this light. Now to find a pouch for it!

Review: GoSt Paleo Barefoots - Anterra

I've been running "barefoot" for quite some time now, as part of my ongoing fitness regime. I received a set of the GoSt Paleo Barefoots PRONATIV shoes early in the year to review, and have never looked back. In my discussions with Jörg of GoSt Barefoots, he suggested that for the colder months, wearing the liners they have would make the cold more bearable. They run on ice and snow in Germany, so I thought "what the hell, why not?". He also suggested I could try out their new liner, the Paleos^®-Lining-Socks, and recommended that I try some Paleo's with regular socks as well. To do that, however, he suggested I try a size up in the Barefoots, and that he would send me the ANTERRA's in a size larger than my PRONATIV's.

The PRONATIV is on the left foot here, the ANTERRA on the right.

Made of the same "4 in 1" welded 0.55 mm gauge "1.4404" stainless steel  with a 4mm external diameter chain and an internal diameter of 2.9 mm as the PRONATIV's, the ANTERRA's have a slightly different lacing and tongue pattern.

These use three metal brackets to act as tensioners, linked directly to the mesh, with the shock cord running through them and bunching to give a secure fit. They also feature a higher tongue, with extra mesh running up the forefoot.

The larger size is still very wearable, and more comfortable over a more heavily padded foot, it did tend to fold over itself as I ran though, leading to an added "lumpiness" to my cross-country runs. When I wore the socks, this was far less an issue. 

I was training for my third Tough Mudder, which I had previously run in boots. The Paleos didn't let me down and I completed the course in my best time, with fewest falls and certainly my best recovery time.

Lining Socks

 There are my favorite of the foot-savers, well suited to my long feet, and keep them clean, without sacrificing tactile ability.












Neoprene Running Kit socks

These are fun and light, but as with all neoprene, they are sweaty, but certainly protect the upper surface of my forefoot and ankle from any chafing.

Ankle Wraps

These were the hardest to get right, but also the most minimal of the foot-savers. Almost Olympic in their design, this modern take on the Phaecasium certinly have their place, but were not for me.









Basic Sock

I didn't really like the fit of the Basic Sock, but the certainly did protect my forefoot and ankle from any chafing and some grime that accumulates from urban and suburban wear of the Barefoots.










This is my feet (and Tactical Baby's) following a day of running about, climbing boulders and wandering in the city, without any of the socks. Left foot is the PRONATIV, right foot is the ANTERRA. You can see the different patterns of city-grime that have appeared; the baggier-fit of the larger sized ANTERRA's left my right foot a touch cleaner, but with a more uniform ring around the ankle.

This neatly indicated the coverage provided by the two different styles. I think because of the fit, I prefer the PRONATIV's, but the ANTERRA styling is a bit more fancy, with the metal buckles giving a more intricate look.

However, for the purposes of barefoot running, either are adequate, for sure. That I ran the Tough Mudder in mine, without becoming mired, or worse, losing my shoe, as I saw many of my fellow Mudders (even team-mates) doing, is testament to this. The protective ability of the links are amazing, and in over 130km of off-path running, I've only been stuck by a single thorn, and not deeply either.

Wish-Lust: Kickstarter Juggernaut - iPhone 5 case

I've been terribly remiss, and wanted to quickly get a post up about a Kickstarter from Juggernaut Defense which is almost at the end of its pledge pitch, and has a ways to go.

Ever since I killed my iPhone 4 SLXtreme hard-case whilst doing Tough Mudder, I've been on the lookout for upgrades.

When I saw the iPhone5 Ruggedized/Wearable case from Juggernaut on Kickstarter, I knew I had to be in on the action.




These are some of the reward options, I'm especially keen on the PALS/MOLLE mount, and the forearm mount, as well as the case itself, which will be Water proof, Dust proof, Drop Proof - (to IP-67standards), the front screen will feature hardened anti-glare glass protection (whilst still being capacitive) and the case itself will be built for quick phone insertion and removal, as well as the quick release mounting options I mentioned before.

Two styles of chest mount: PALS/MOLLE if you're using a compatible vest or plate carrier (or even something like the Hazard4 Ventrapack) or a Sternum Mount to interfacing with a backpack, hydration pack, or other shoulder straps. The wrist mount, not unlike the Platatac Recce map holder it provides a hands-free use option, which secures over a range of sizes using a "BOA mechanism", especially suited to wear over clothing.The final mount option is the vertical backpack strap mount, which places the case in portrait (vertical) position. This mount is in development and Juggernaut promise to share updates as we build prototypes during the Kickstarter project.

The case itself (prototype pictured here) has a single opening end with a sealed access door allowing fast insertion and removal of your phone. It has a large robust latch, so there is no hassle with snap on or screw together cases where sealing can be compromised.

All phone controls are accessed through sealed, nickel plated stainless steel button modules, although the Fingerprint scan is not an option.



All phone cameras and LED flashes use optically clear sealed lenses so that the camera and flash work while inside the case, that's a real boon, especially considering the fuzzy photos I took with the SLXtreme case. The data/charge connection is accessed through a sealed door on the bottom of the case and secured by a captive thumbscrew, which cant be lost or dropped, compromising the case.

All in all this is a really impressive case, and system as a whole, and I really hope that it funds, or if not, that they end up doing a production run at some stage.

Review: Hazard4 - Ventrapack

I've been really pleased with the Hazard4 LaunchPad iPad case, and the Loader RG holster harness that I have covered previously. The Loader RG harness is part of my EDC, I don't feel dressed without it. 

 When I placed my last order with Hazard4, I picked up a couple of items, and this was one of them. I have covered a couple of admin pouches before, and am a big fan of my ZuluNylonGear CAOS pouch, as well as my really good Hill People Gear Runner Bag.

This is the Hazard5 low-profile chest rig, the Ventrapack.
The first thing I found was that it was considerably bigger than I had expected, at 31 x 26.5 x 3 cm (12.2" x 10.4" x 1.2"), if I had checked their website or even counted PALS/ MOLLE strips, I would have worked this out. However, size is not a concern for me. Sure, it matters, but I like variety! 

With 6 channels and 4 rows of PALS/MOLLE, and two rows of loop-field, you get an idea of the size here. A Faastex style clip on the front gives a quick secure option, as well as the twin zipper releases around the perimeter. This then reveals the interior, which is really very cool. 

Webbing retainers hold the "front" of the platform, to make a shelf, with an included clear document/map window with a stiffened and quilted padded micro-suede backing (much like in the LaunchPad) with two little hook and loop tabs which fits and secures an iPad nicely. A cable feed port is a really nice addition.

That shelf also acts as a work-space, which is matched by a tool shop's worth of storage on the "back" of the platform. Three pen holders, Two multi-tool sized pockets, twin elasticised cylyme/small tool holders on top of a wide but shallow pocket make the first row of pockets, with a second layer with two PDA sized pockets, and a wide and tall, hook-and-loop closed pocket. behind all of these is a full document sized panel, with a dummy-cord'ing loop. 

I filled out my pockets with a collection of little tools; my Spyderco Harp tool, one of my WTF multi-tools, a set of lock-picks, and several practice locks. I also have my APOC Geiger counter. Because I'm awesome.

The back of the pack shows off its attachment options. Four sets of webbing, attached to each of the four corners of the pack enable the wearer to lash it to the straps and body of a backpack. Fastex buckles provide quick attachment and removal of the Ventrapack, as well as ease of fitting.

Each of the four sets of webbing are terminated with a hook-and-loop strip, which enables you to both bundle loose webbing, but also attache the strap to other straps, without the need of an additional buckle. 

There are D-loops fitted to the top two straps, as well as the front Fastex clasp, all of which can be used for additional attachment. I found that my Portuguese sinnet paracord lanyard for my multitool, which I attach to both belt and tool with a small carabiner, perfect placement for this pack, making a very effective hip-bag for hands free courier-style. 

You could just as easily throw a shoulder strap through those D-loops and wear it as a messenger-bag.

 I really like the variety that this pack offers me, especially for times where I know I will be needing to carry a bunch of hand tools, but also needing my hands free. Roof crawlspaces, zombie-choked freeway, half-way up a power-pole, having your tools to hand and your movement unrestricted is a real boon, and this is certainly one way of ensuring it. 

The Invista® 1000D Cordura makes for a rugged and sturdy pack, which is good for both your tools and your body, and I especially liked that the bottom of the pack had a toughened strip, to further guard against abrasions. 
 
The fact that the back of the pack is lined with a breath-ability enhancing mesh, forming an additional document pouch as well as having bottom pockets to stow the straps when not in use, when the pack is attached by D-loops, or carabiners off a hip, or the like.

As you can see, it does have a big foot print when worn on the chest (although I'm a skinny fella), it doesn't restrict arm movement overly, and sits very securely. All in all I am very pleased with this additional to my technical loadout. Next time I have to fix something in a hard to reach area, this is coming out to play!

Review: Nuko Tool - ACDT (in GitD)

Following up from the sneak-peak:

When I saw that Norman of Nuko Tools was dallying in glow-in-the-dark materials, I was quick to drop him a line expressing my desires. Whilst the GitD platic is too fragile to be used to mill one of his signature Single NukoTool punchrings or the classic Nuko Heads which he has been milling out of G10.  (and you may remember I got the titanium version for my lovely partner Omega)

He thought it was a great idea too, and suggested he could sandwich a slab of GitD plastic between two titanium slabs of his 2nd Gen Atomic Cranial Divot Tool, which he did, and this beauty is the result.

Seen here looped through my belt-loop, with my paracord ID lanyard hitched.


The simplicity of this deign is evident, it almost passes as a piece of modern art.

Sandwiching these three layers makes the tool considerably thicker than its design originally intended, but this isn't really a drawback, except for those looking for a slimline pocket fob. I like my metal to make its presence known, and this certainly does.

Three hex-screw rivets lay flush with the front surface, and a keyring hole drilled through the piece gives the option of attaching a split ring.

The leading edge of the ACDT features a bottle (or perhaps threat) opening scallop, the flanking edges of which protect the soft GitD middle nicely, and are not so sharp as to catch or dig into clothes or the hand whilst wearing the ACDT.

When gripped through the finger hole, the curves fit the hand nicely, even with an index finger and middle finger ring on. This leaves the "bottle opener" corner as your leading edge, with the squared faces outwards and upwards. Essentially a pistol grip, with any keys or the like, trailing from the bottom of your palm. I found that when striking a target, the slot bit into my index finger a little, but as I'm not planning to make a habit of taking to the bags (or heads) regularly with it, that's no big deal. This is primarily a fob, with a -tertiary- impact tool application for me. That said, I put some nasty dings in a HDD, timber facing, and concrete wall!

I also tried a reversed grip, presenting a much more flat face, which covered more knuckle, but left me with less to grip, and put the bottle opener in my thumb/index webbing.

This wasn't quite as easy to grip, but offers the other advantages of more titanium (and glow) frontwards ..

I found that the extra-thick ACDT has been difficult to feed a split-ring through, and whilst I am still looking, I've so far been happy just to do a loop through the finger hole, the placement of the slot has been just fine for this.

Then there is the glow in the dark side of things. The running-board strip of GitD plastic catches light quite nicely, I have noticed my belt-looped ACDT picks up enough ambient light to be noticeable when I go into a darkened room, and quite positively flares up after exposure to the Australian daytime. For the purposes of this shot, I did hit it with my Jil Lite - JenyX UV torch .

I really love my UV and GitD items, as well as my titanium goodies, and even more so, my wearable impact tools ....

If you have a hankering for some cool pocket bling, be sure to check out NukoTools ...

Review: 5.11 Tactical Kilts

I love it when I get my wish-lusts fulfilled,  but I am so glad when its not just me, but the hordes of fans who get theirs too ... From what was originally a "April's Fools" joke, back in 2011,  with a VERY limited run (less than 100, if accounts are to be believed), the uproar from fans led CEO of 5.11 Tactical, Mr Tom Davin to take the cries to heart, and a full production run was initiated.

These are the 5.11 Tacical TDU Kilts  in Tan, OD, Black and Multicam and managed to secure in a pre-order, from 5.11 Tactical Australia.

I've really enjoyed adding more kilts to my collection over the last few years, along with my collection of UtiliKilts and my formal tartan kilt, as well as others, they are an important part of my identity.

The question is just how apt are they for a survival situation? It all comes down to the "form and function" ratio.  I'll go into that in a bit, first, here's what makes up the 5.11 TDU kilt.

 Firstly, they are made to mirror the TDU pants as closely as possible, with pocket placement, (including the cargo pockets) for "consistency of training". I have several sets of 5.11 pants, the Stryke and the TacLite Pro pants and I can say that I like the consistency, even between different designs and cuts. 

The TDU kilt is made of the same 65% Polyester, 35% Teflon treated ripstop cotton as the TacLite Pro pants, with four snap-closures on each side of the front panel. Double and triple stitching throughout ensures rugged and reliable wear.

Brass D-loops for sporran attachment are awesome, and I have worn my CAOS Admin pouch as one, for full Tacti-cool Effect.

Always a welcome addition to a kilt, the front slant pockets featured reinforced edges to protect against knife, pen or light clip abrasion.

The front belt loop includes additional badge holder loops, the loops themselves are wide enough to accommodate up to a 1 3/4" belt. Ive had no trouble with any of my belts; but tend to go with either the made-to-match 5.11 TDU belts, my shiny PM Leather hobble belts, or the always dependable 215 Gear Ultimate Rigger belt.

The side cargo pockets are also press-snapped on, and removable, and swappable, with hook-and-loop closures. Inside each pocket, are either two or three internal pockets, to fit two 30 round AR magazines or three pistol magazines, the pockets can be switched from one side to the other to fit your need.  A gap has been left in the lid-flap to accommodate feeling items through, in this case, I have used my Benchmade SOCP CQB dagger-trainer to demonstrate .


An internal press-snap gives an additional modesty protector, as well and ensuing you get more cover for your activities. There has been a long military history of the kilt, formally ending during WW2, and the recent revival in "tactical-wear" is only a reflection of that, however, I have worn mine in some pretty arduous conditions, and can attest that they offer considerable freedom of movement, are not all that cold in inclement weather, and cooling in hot weather.

I have climbed, run, crawled and jumped in mine, as well as wearing them to work on a regular basis. Much like my collection of "cargo pants" these offer me a means to carry my EDC, some rugged daily-wear and have some individuality to boot. Thanks Mr Davin!