Review: SORD - StormTrooper hand warmer

I got in touch with the good folks over at SORD Australia who had previously fixed me up with the long 870 scabbard pouch and a very clever covert-use hoodie. I had seen they had put out a couple of new items, and managed to secure some, just in time to take out camping and adventuring st s Post-Apocalyptic simulation weekend I was attending.

The first item I want to cover was their very fancy StormTrooper Hand Warmer. Available following a three year development development cycle in which it was put through high altitude parachute descents from around 7600m (25,000ft), and resisting wind speeds in excess of 250kph (135knots/155mph) as well as extended periods in mountain / cold weather environments in multiple countries. That was sales pitch enough for me. I've lived in Calgary, and a couple of other places which have snow, I've even taken a few pieces of kit to the limited snow we get here in Melbourne to trail. I hate the snow, generally, and being cold. Sometimes "hands-in-pockets" is not an option and I like to have options.

Check out that spacious muff!

This is where the StormTrooper comes in. Made from an outer shell fabric of Duro Industries LiteLok  (with a 500D Cordura option in Kryptek Yeti also available), the StormTrooper is filled with 40gsm Prima Loft fill (in double/triple layers), and is lined with the same lightweight lining as used in SORD's jackets.

It attaches in a variety of ways;  with three ITW Web Dominators on shock-cord loops, for attachment to a PLAS/MOLLE platform like a plate carrier or chest rig. There is also a broad hook-and-loop sandwich panel for attachment to platforms with a corresponding hook-and-loop bottom, like the Platatac MAC, I already have as it happens (loop-field faces forward).

Rear view showing belt loops, D-rings and storage cords

The back face is fitted with three belt loops wide enough to take 50mm belts (and feed over riggers belt buckles and Cobra buckles alike). It is also fitted with two D-rings for fitting a neck-strap to sling it around your shoulders.

Zippered blow-out section on the belly of the StormTrooper

The StormTrooper is fitted with 2 separate internal pockets with weather resistant zips for heater packs, or small items, one larger external front zippered pocket for small easily accessible items, like a compass, a light or other small tools and a lower zippered blow out section that increases internal capacity for large hands, especially useful if you have bulky gloves, a mounted GPS or altimeter or a map pouch on your wrist.

Second internal hand-warmer pocket, under recess to stow hook-and-loop flap

Elasticized, adjustable wrist cuffs, let you hunker the muff section down to fir your hands, without leading to a snag-risk in case you need to respond quickly. I found that the muff was perfectly shaped to hold my hands, and let me drop my shoulders, giving me a really relaxed posture, without having my hands stuck in pants-pockets, especially useful when my top was covered in a vest, or obscured by pack-straps.

The internal pockets gave a a couple of places to stash more needfuls, and certainly fit the hand-warmers I have. I also found that the Web Dominators allowed be to quickly roll it up, and stow it away, rolling down to almost nothing thanks to the LiteLok fabric and light down used, and its built in stash sack packs the muff down to almost nothing.

The internally secured storage baggie

Thankfully it's not yet been could enough to -need- the StormTrooper here yet, although it did rain rather miserably on the first night of my last camping trip, and the long walks around the site make for a good chance to stow my hands away. I also found it was a pretty good place to stash some small, light and often used items.

The multiple attachment options, multiple pockets as well as the spacious and comfortable muff section make this an excellent addition to anyone's kit, especially if you are going to find yourself in a cold and miserable place or two. It stayed out of the way when I wasn't using it, and even acted as a quick dump-pouch when I had to stow a long item and keep my hands free.

Post-Apocalyptic Roleplay, with the SORD Stormtrooper at my belly band

You might find that all the accessory shock-cord gets in the way, but they're all removable, and you can set it up as low-drag as you need it.

Next winter, I have a feeling I will be keeping this in my pack, to whip out  when the weather does a Melbourne on us. I look forwards to again being the guy people look at thinking "why didn't I think of that?"

Review: Mystery Ranch - 1Day Assault Pack

I put in just one request this Giftmas past, I saw on a Facebook group I am on (hey all you Secret Ranch folks!) one of the very limited, Singapore only release of a day pack from the inestimable Mystery Ranch. The good folks at Mystery Ranch, who have been putting together packs for Military, Fire and Rescue, Backpack Hunting and Mountaineering for 30 years, and I've been lusting after them.

I have a piece of Mystery Ranch kit already, the very cool Cinch Strap, which enables you to fit a pack over the top of a plate carriers shoulder straps and release it quickly as needed. That's the kind of forward thinking that they put into their products.

The Asia only release of this design is available through Hornest. It is very similar in design to the newly released ASAP Pack, and the more mature 3 Day Assault Pack.  This however is the Mystery Ranch 1 Day Assault Pack.

This 18.2L (1110 cu inch) pack features the iconic Mystery Ranch 3-way Y-zip which drew me to their packs in the first place, and weighs in at roughly 1.2kg (2lb 12oz) due in no small part to the tightly woven, water resistance treated 500d Cordura that makes up its walls. The bottoms of the pack is double layered and the inner layer is reported to be cut 1/2" smaller than the outer layer, placing the bulk of the load's weight on that inner layer, leaving the outer unstressed. Brilliant design.

The 1DAP is a smaller 3-zip pack with multiple pockets internally and externally. I have previously very much enjoyed the smaller packs I've used as my daily carry, with the much beloved Platatac Bullock Echo being the logical progression from my Crumpler Messenger Bag, and the MR 1DAP is a fitting successor to both of those, and my more recent every day carry bag, the rugged Propper Gen Multipurpose satchel bag. I wanted to be able to carry a bunch of my usual preparedness kit, without wanting to draw too much attention to myself, so I jumped at the chance for a "regular guy" black option, over my more usual khaki, this time.


The 1DAP features 3 rows of 3 channel PALS/MOLLE on both of the top sides, as twin 6 loop daisy-chain strips of loops running down the front of the pack. These are perfect for attaching lights, attaching carabiners, looping cord or what have you.

All the external facing zippers are reversed, and tape covered, to resist water and dust intrusion. The long stem of the Y of the zip extends from the very base of the pack all the way into three inches into body of the pack. The two arms of the Y zip all the way to the back of the pack, and each can be opened independently, to use as a flap lid for the top, a side entrance for just a hand, or opening all three, filleting the pack, for full access.



It offers several hydration configuration options, internally, there is a loop of cord at the very top of the inside of the pack for attaching a hydration bladder like the Source Storm WXP or the Platapus PIB, but more than just an attachment point, the 1DAP zippered access ports at the top corners of the pack (with some of my safety-orange paracord threaded through, to demonstrate here). Those zippers tuck well out of the way when not in use, shielded by the same reverse-cover design as the main body zippers, keeping rain and crud out.

The pale internal sleeve is made up of a backing, sewn into the top seam of the pack, and is open on the sides, with just two webbing anchors about 3/4 of the way down. This gives the internals of the pack some freedom of movement, without sacrificing stability. This allows larger items to be slipped under the front, cables and even additional hydration bladders to be fitted.

The internal sleeve also features a deep drawstring closure pocket, which can accommodate a variety of large items, like the 2L version of the Pathopak, which are 125x170mm, with ease. This is a great place to stow a hydration bladder, keeping its potential condensation off the rest of your kit, I also use it to secure larger items I don't want bouncing about the pack, or even my lunch. You could also use it as the base-cap of a longer item held secure by the drawstring, and projecting out of the top of the pack.

There are two mesh sided utility pockets with zippers against the bottom of the drawstring pocket of the sleeve, which are very useful as the rest of the packs internals are free from attachment points. Nowhere to attach pouches, which is a drawback, but the upside is that there is a lot of room to store larger items. The fact the internal sleeve is not fully attached also means you can shove it up, and out of the way, and place broader items at the base of the pack, and adjust for weight without crowding.

The top of the pack features a very clever, reverse opening and horseshoe shapes top pocket, as well as a broad patch of loop field, to attach patches and name tapes. Inside, a spacious main area, with a mesh-lining at the bottom allows storage of a variety of items. I keep a spare cap, and goggles, and a LazerBrite light in mine. The "top" of the lid features a zippered pocket, where I keep first aid kid, some gloves, a haemostat kit and the like. You may have noticed that at the tops and bottoms of each of the zipper runs, and lines of webbing, there is a loop, primarily for assisting a grip and unzip.

This is another example of the forward thinking put into the design of these bags. Another aspect, is the Futura Yoke system of shoulder straps and attachments, which allow for some really clever adjustment options.

The contoured padded components, with some built in webbing loops (you can see I've put a ITW GrimLOC on my left strap) and a pectoral strap, to secure the pack whilst you're on the bounce. These are nicely done, but pretty standard, there are tri-glide buckles with webbing feeding through from the back of the pack to the shoulder straps, and these play a really key role in adjusting the pack.

As well as the air-mesh backing of the pack, it has a built in semi-rigid packing behind that, which is how the pack manages its rather exciting transformation.

Fiberforge, a thermoplastics company Mystery Ranch has partnered with, builds their Framesheet Adjusters. These adjusters are a thermoplastic composite material created by fusing fiberglass with recycled softdrink bottles. The resulting material is apparently 60% lighter and 600% stiffer than steel, and 30% lighter than aluminium. This plate matches another one that sits inside the pack at the bottom, forming lizard like scales that give the pack a really good feel to wear. No jabs form hard-edged kit in the pack. It curves to match the natural inclines of the back, and sits nicely in the lumber region.

The back section of the pack can expand from around 40cm (16") to a whopping 60cm (22") because of the top of the back part of the pack is actually a loop backed insert,and a matching hook-field within the pack body itself. I had some trouble getting this quite right, as the broad sheets of hook and corresponding loop were only too happy to lock tight, but I managed to shoe-horn it into the best fit for me too.

This 40cm (16") part, which houses the Fiberforge insert, can be moved up and down, allowing the wearer to customise the placement of the pack, and by adjusting the webbing held by the tri-glide sliders on the shoulder straps, the perfect fit is easy to maintain.

This fits in with Mystery Ranch's resolve to solve the problem of packs not fitting properly over body armor because of the increase in relative torso size wearing armor creates. Being able to adjust the harnessing to account for this increase in size greatly enhances the stability and comfort of the pack when wearing armor.

Couple this with their Cinch Strap, and you have a pack system that will suit any body type, in or out of full kit.

I'm a chronic over-packer, so having a small capacity pack, with only two 3x3 PALS/MOLLE fields is part of my 12 step recovery process, but I like to think I am achieving my goals of remaining Equipped, without being someone who gets train services halted. I have put a few pouches on the outside of the pack, and I'm adjusting my load out in those, ad well as internally. One thing Ive noted is that even the "wings" where the shoulder straps meet the pack are padded, its a delight to wear as a result of these little thoughts, and whilst nothing from Mystery Ranch is cheep, they are made to be effective, and last.

I've found I really like the narrow silhouette of this design, being long and tall, it avoids the over-hang that other packs have given me, meaning I'm right and ready to duck and weave, getting in and out of where I need to go, be that in a busy laboratory, a crowded train, droid evasion in ventilation shafts or long forgotten command bunkers. 

Review: Great Outdoors - Silver Grande 9L

Having quite the expansive family these days (3-4 adults, 1-2 little kids, depending on who is around) when we go camping, (which really isn't often enough) we try to make the most of it, and be as comfortable as possible.

Once the little ones have grown up a bit, we might consider more hiking type trips, but until then, we camp where we can unload the SUV. That means we can afford to camp BIG. This means, in this case, we can take a big tent like the Great Outdoors - Silver Grande 9L.


Unfortunately it seems the "Great Outdoors" line has gone under, but similar tents like the Spinifex Franklin, or the Wild Country - Getaway II 9MR but none that I've found in my recent searches have the four-room option that the Silver Grande features.

 The Silver Grande is split into four distinct areas, each with a 360o zippered vestibule, and close-to-the-flood bulkheads. The whole of the base is bucketed to a good height, ensuring that the interior stays dry in inclement weather.

image swiped from eBay

This really is quite the palatial tent with measures 6.4m in overall length (2.1 x 2.2 x 2.1) and 3m wide in the middle, 2.15m at the end rooms. The front room adds another 2.1m to the width to a total of 4.3m. The side rooms are a little bit shorter than the main central room, which tops out at a very respectable 2m15m.

With all the internal doors open, and wrapped up in their self-storing toggle and loop attachments the interior is really very spacious. The walls are at a high angle, so you maximize the available space, so often lost in lower dome tents. The internal walls are all a very light, breathable material, and well fitted. Window and main exterior doors are all fitted with a translucent insect proof mesh, with clear PVC windows and a skylight in the flysheet.

two sets of colour coded poles make up the structural supports, and each is designed to slot into sleeves built into the inner shell, and mount on captive pegs attached to split rings, attached to the base.

image swiped from eBay

The fly itself is a silvered 3000mm rated waterproofed polyester. It has hook-and-loop tabs situated at key points to anchor it to the poles for added wind resistance. The inner shell also features clasps on elastic loops, ensuring both a taught but also stable attachment. Without the fly, the tent is very light and airy, with the large swathes of mesh siding and the very light material of the walls letting light stream in. The silvered fly adds a significant level of shade, without being gloomy, and dramatically cuts the wind. It also blocks out harmful UV radiation, and keeps the tent cool in the Australian sun.

With the doors open, or at least set up in the awning-up configuration, with each of the side rooms having the option to put one up, and the main room from the back side also can be set up as an awning. One set of poles are provided to do this.

The rooms all have sets of pockets built into the walls, either in the corners, or in the under-window areas.

image swiped from eBay

There are also loop attachment points on the ceiling, and the internal door toggle and loop fittings also provide attachment points, for lights, clothes and the like. The storage setup is quite thoughtful, ans also takes advantage of the high-angled walls effectively.

The tent's "front room" doesn't have the same bucketed floor as the main body of the tent, but does feature an attached floor that is mounted to the front wall of the main room. The flysheet covers this area and provides a sheltered, but not sealed enclosure. We typically use this area for gear storage, leaving our camp-kitchen, food stores and the like in here, and as a boot-changing area.

image swiped from eBay

Not being sealed, you still need to be aware of bugs and other creatures getting in and around your gear. This can be a real concern for those of us who live in Australia. Or perhaps in North America if you have racoons and bears to worry about.

This is billed as a 9 person tent, and there is plenty of room for that many, if you make good use of the floorspace and don't need to have too much walking around room. We generally have had one of the side rooms for Tactical Baby and Triceratops Girl, with their fancy collapsible camp bunk bed, the main room and the other side room for the adults. In doing so, we can open or close the internal walls for (visual) privacy, and also use them to keep any bugs in or out, as the case may be. The walls are translucent enough that lights can be shone through them, to give a nice ambient glow and a central lantern can illuminate the entire interior sufficiently for everyone to find their beds and boots.

Being a thin walled tent, you obviously don't get much in the way of sound dampening, so be sure to pick your company and camp site well!

The flexibility of having doors for each room was a great addition, especially as we use the central room as the main bedroom, but left me with the concern that the zipper-capable little ones might wake up, and wander off into the bush at night. This was easily solved by extending the exterior door zippers all the way to the top of its arc, well out of little-hands reach. We also left the internal door unzipped at little-people height, so they could come in to us if needed, but still providing some more of the bug-limiting compartmentalization.

One feature that we've never made use of are the floor-height zippered cable and hose ports, situated just above the bucket sidings in the rooms, allowing us to feed power or plumbing into the tent. Even at powered sites, we don't tend to bring mains-charged items with us, so this hasn't been needed.

Just remember, this all comes at a cost, weight. 28kg of weight. This is a big tent, and whilst the bag is easy enough to stow in the back of the RAV4, a bit unwieldy (it's dive-bag sized) and it has wheels on the bottom corners, but it is heavy. Way to heavy to hike with. This is a drop and build base-camp item, not a roving set. That said, with instructions sewn into the bag, and colour coded poles and sleeves, (which we augmented with permanent marker, to indicate which way around the fly needs to sit) the whole thing takes about 15 minutes to put up, and 20-25 minutes to pull down and pack up. All in all this is a great family tent, and if we ever needed to abandon home for any reason, and have no fixed plan of where we might stay, I would strongly consider this as a temporary retreat.

It certainly works for short to medium term camp-outs for us.

Review: Propper - Gen Multipurpose Bag

As first seen on RecoilWeb .....

Here is another part of my Propper haul, and one that I have been getting a whole lot of utility out of.  I took it with me to Fiji for my island get-away, and it rode as my carry-on as well as emergency toddler change station. It's been my day-to-day bag since then, swapping out from my beloved Platatac Bullock Echo as I've needed a more briefcase style option rather than a backpack for my current duties.

This is the Propper Gen Multipurpose Bag and it punches well above its weight.

Filled with storage options, the bag offers a rather large carry-capacity to an otherwise standard briefcase-style design.  I can fit three 2L (2.1qt) milk jugs to the main compartment with no problem.

One of the first things I noticed, and have come to love, about this bag, was the easy-access, dual zipper opening, tapered grab handles. Grab and yank, and the bag opens up. No more fiddly zipper pulls and fine motor skills needed to grab your needfulls. More on that later.

The bag has a wide webbing strap, with a very well made non-slip shoulder-pad, a real boon for a habitual over-packer like myself. The shoulder pad itself has webbing loops that allow you to fix it in place via hook-and-loop tabs, through the pad, to eliminate slippage.  The strap can be adjusted at each end with a broad tri-glide loop, and there is a big-mouth 50mm (2") Fastex buckle at each end of the strap, for quick release. One of my biggest gripes with previous satchels has been the "slung across my chest" trap.

There is also a inset pocket at each end of the bag, between the main compartment and the side-saddle pockets, that very neatly fits my Propper Liberty bottle and even takes my venerable 1L SIGG bottle. 

The "front" panel of the bag is faced with a broad loop field, for patches, and I've made great use of that. Inside that front facing panel is a very spacious document compartment, with three distinct sections, that will fit a number of CD cases, iPads and the like. A hook-and-loop tabbed strap keeps your valuable documents and devices secured, and as with all the zippers on this bag, it features rubber-moulded zipper-pulls as well as "inverted" zipper material to give maximum crud intrusion protection.  

The opposing "inside" facing panel features an even greater selection of pockets, for holding all your needful tools and tricks. 

I have mine loaded up with a variety of goodies; both eating and entry hardware, medical and electronic. Things I don't like to leave home without! 

Again, the double  rubber-molded zipper pulls give good, fast access to my kit, and the panel itself offers a flat clean workspace that is flush to the ground, thanks to the design. 

You can see the main carry handles extend all the way through the pack from the side panels,  they continue all the way under the bag as it happens. They are NOT going to tear off, no matter what you fill it with.

The main compartment has its own surprises as well. Twin storage pockets add further capacity to the narrow ends and the bottom of the compartment is lined with loop-field to facilitate the removable divider, which itself has zippered pockets for business cards, death-cards, whatever. 

It is also loop-faced and includes a 3-channel organizer for all your highlighter pens, or double stacked mags, to go along with the hook-field sided adjustable pistol sleeve that would accommodate most handguns. I don't have any justification to have that in use, but you might. 

Coupled with the grab handle opening strap and you have a quick-access concealed carry option right there.

The side pockets, two on one end, and one bigger one on the other, follow the same pattern. Taped seams, inverted zipper runs to keep crud out, and internal pockets to maximize organization. The single big side pocket also features a clear plastic external ID pocket.

One more cool feature are the twin, adjustable hook-and-loop retention straps for an umbrella or flashlight that sits over the"inside" pocket. It also happens to be a perfect fit for my DeadOn Anihilator Superhammer, because, you never know ...

All in all, this is a pretty awesome bag. It certainly does everything it sets out to do, and had weathered all I've thrown at it, from kicking around trains, planes and hospitals, to being an overnight bag and a day-to-day hauler of my ever changing loadout.

If I had to pick something to gripe about it would be the overall "width" of the bag. When I sling it either across the front of my hips like a paratroopers reserve, I've found that it is  so wide that I bump and brush people with it where normally I wouldn't have, with a backpack. Same goes when I sling it behind me. The addition of the end pockets, whilst adding valuable additional storage, also add to the bulk of the bag.

That said, I'm very pleased with it, and will keep using it until it dies or I find something better.

Review: Propper - STL II pants

As first seen on BreachBangClear ..... I really love being able to write for these guys, and upcoming articles for RecoilWeb too!


Here's another great piece from Propper's new line-up, the redoubtable  STL II pants, that came in my haul of Propper loot, along with a Liberty Bottle , the ICE polo shirt, (http://www.epropper.com/p-105-ice-mens-performance-polo-short-sleeve.aspx), their Gen Multipurpose Bag (http://www.epropper.com/p-217-gen-multipurpose-bag.aspx) and a 720 Belt (http://www.epropper.com/p-225-720-belt.aspx) all of which have reviews pending. Watch this space.

Here is what I can tell you about the STL II pants. I've reviewed some Propper pants before and appreciated the comfort and wearability of their design, construction and durability. The STL II's are no different. Made from a 97% nylon and 3% spandex, it has a generous cut and all the hard wearing seams are reinforced, and flat-finished, giving these pants a very comfortable fit. http://www.epropper.com/p-148-stl-ii-pant.aspx

The fabric is soft, breathes nicely and light, a far cry from my old canvas type cargo pants of yesteryear. I wonder how hard-wearing they will be in the long term, and whether they need to fall in the "slacks vs overalls" category of rough-use. I have a feeling running through acacia thorns wouldn't be a lot of fun in these.

On the upside, they feature gusseted crotch allows greater range of motion as well as giving pinch free fit for those of us who go-commando or even sport some jewelry ...

An interesting feature is that the bottom of the legs have a zippered expandable opening, for fitting over boots, as well as a reinforced "kick-panel"  to take some of the brunt for those who punish their back hems a fair bit.

The front pockets feature a reinforcing strip, for belt-clips of knives or key-holders, and are both deep and well lined. No holes poking through or awkward bulges with these. The thigh-pockets are zippered and discreet, as are the rear-pockets. A pair of looped fabric bands on the front two belt-loops

You might notice that I have stuffed my iPad Air into the thigh-pocket. A tight fit, but I'd call that a success, in my "can I pocket my iPad" criteria. This also further demonstrated the clean and subtle lines of these pants. When closed off, there are no bulging baffles or overtly "cool-guy" flaps on these pants. Perfect for blending in with the regular folks out and about, in the office, or in my day-to-day case, in hospitals and giving presentations in board-rooms, without making security nervous.

As Propper themselves state, you'd have to look twice at these pants to spot their tactical features.

Speaking of which, there is even a secret 12cm x 10cm pocket, in the back waistband seam.  Its big enough for me to stash my passports, or a phone, and when coupled with a pair of belt-pouches, is pretty much invisible.

For pants as cleanly cut as these, I like that they still have the "secret-squirrel" feel of their tactical ancestry.  As previously mentioned, they feel more like slacks than combat-pants, that is a plus and a minus, depending on how you look at it.

Review: Platatac prototype hydration carrier

Here is the hydration pack that I have been using for the last few Tough Mudder events I've done. This is an old prototype from Platatac that I picked up on eBay, and combines elements of both their Bravo hydration carrier that I have, and the MEOP Medic Pack both of which I've covered in the past, and are great pieces.

I found that wearing an extra set of straps was redundant when I was wearing a vest anyway on my Tough Mudder and similar adventures, which is why I looked for an alternative to the Bravo, which has served me well in other situations, and on my first Tough Mudder. When I saw this piece come up on eBay, I was thrilled to give it a go. It follows the same kind of design philosophy I've come to expect from Platatac pieces, with a tough 1000d Cordura exterior, and ITW Nexus hardware. It if "faced" with 6 rows of 4 channel PALLS/MOLLE loops, and features a hook-and-loop secured drag handle. Running down the flanks are nylon D-rings, three to a side, allowing shock or paracord to be run through these, to provide attachment points, or compression.

The wide-mouth of the pouch perfectly fits the Source Storm 3L hydration bladders main cap.

The baffled sides of the carrier allow for quite significant volumes to be carrier, without restriction, or perhaps even storage for other items besides a hydration pack. However, this particular piece lack the zipper-access of the Bravo, which means that the only access into or out of the inside is through the main cap.

This actually posed a problem when trying to run my hydration hose through it, and I bit the bullet and melted a channel in the backside to feed it through.

I also had to melt a drainage hole in the bottom, following the previous Tough Mudder, last September.
I found that the carrier filled up with nasty pond water when I took my tumbles, which really added to the weight I was hauling. No such trouble with a small drain hole melted in this time around.

The back of the carrier offers a variety of attachment options; Zippers paired with the MEOP carrier (which allows me to sandwich these two pouches nicely). It also features female Fastex clip ends top and bottom, tri-glide loops for all your clipping and looping needs. Best yet, the back features two sets of three three channel PALS/MOLLE PLMRS (Platypus Light Modular Recovery System) strips. These gave both a rock solid attachment and also load spreading capacity. I barely felt the 3kg that the full bladder weighed,and certainly not the sloshing side-to-side I might have with a pack-type carrier.

This was just a prototype, bridging the gap between the Bravo and the MEOP, but if you want to see the new production version, check out the Platatac Utility Hydration Cover. Looks like the logical next step.