Review: Strike Industries - Simple Plate Carrier

This is a really interesting piece of multifunction kit. Strike Industries, in conjunction with J Tech Gear have come up with a multifunction plate carrier, that doubles as a carry case for a laptop. They did my Sling Catch, and Picatinny vertical sling mount
so I've been keeping an eye on their new developments, and was only too pleased to see this cool piece become available, and to receive one! 

This might seem like an unusual combination, but considering the kinds of products on the market now in the US to attempt to protect kids from the alarmingly frequent mass-shootings at schools, the idea of having every-day items with the potential for containing armour is not new. In Australia, we are lucky to have pretty low rates of weapon related violence, but, being prepared for disaster, even the personal and human initiated kind, is what this blog is about. This is the Simple Plate Carrier, and it is anything but merely "simple"...

I've talked about what I use as a plate-substitute before, when reviewing my Platatac MAC rig, and whilst not ballistic protection,  I have again included Polyethylene cutting boards, shaped to the right size.

These not only give me the rigidity and bulk of plates, but I figure that they would also afford me some stabbing, cutting and blunt force trauma protection. Perhaps not as cool looking as a set of Mad Max tire armour, but far more modular, lighter and functional. I have a 34cm x 24cm (13 1/2" x 9 1/2") board in the front internal pocket here, which closely mirrors the SI Plate that Strike industries offers

The back compartment houses both my 15" MacBook Pro, a spare battery, and my iPad.

The rugged cordura-type nylon material of the case is very well stitched, with reinforced seams and bartacking on all the attachment and stress points, without being heavy, stiff or bulky. The wide webbing of the strapping is fixed at the upper edge with vertical fastex type buckles, and at the bottom edge with horizontal buckles of the same type and more importantly, size. Lastly, and this was a big point of interest for me, the back of the carrier features a sewn in handle, laying flush with the back, to turn the whole thing into a modern buckler if needed ....


I found that the laptop charger didn't fit very neatly in the case (it formed a bulge where the plug sat) but because the front of the carrier has three rows of PALS/MOLLE, including two side-by-side and covered in loop-pile, for patches, ID tabs and the like, I was able to affix one of the black Platatac FUP pouches I have, and give myself some extra storage capacity, with out bulking the carrier up too much, or making it too obviously a piece of MIL-SPEC type kit. There is a second panel on the lid flap for a flag-size patch. Depending on how big and full your carrier gets, there may be a third loop-filed exposed, for even more patch-goodness, here's my AFT's Jungle Recon extolling the love of his job...


And here is how the shield handle works, from behind. The main strap is wide enough to give a good bunched grip, knuckles flat against the back of the pad. Because of my very long forearms, by elbow poked out a little of the back when I stand "en guard", so I gave an alternative hold a shot, with my hanad gripping one shoulder strap, arm looped through the hand-hold and the other strap over my elbow.

Both seemed to feel pretty good, and with advantages and disadvantages according to the style of defense used.

When carrying the unit around, I tended to sling the the shoulder strap such that the entire carrier sat under my arm, rather than behind me.

This meant that I could bring the other strap up and over my opposing shoulder, to drop the carrier into the classic "front pack" configuration.

"Nice Target" you might say, about the patch, well, as Batman and the Punisher have said in their respective comics, "I cant armor my face" (although, these days this isn't as true. )


So here I am striking a pose, Simple Plate Carrier as a shield, with my trusty S&W Tactical Pen as my on-hand "please don't make my use this" incentive.

You can see that my elbow hangs out, but when taking a better "buckler and dagger stance" this would be less of an issue. with a combination of the polyethylene cutting board, the laptop and the material of the carrier itself, this was a substantial and solid barrier to put between my vitals and someone without my best interests at heart. All in a package I can happily carry about day to day.

One of the great things about this carrier's design is that the shoulder straps, being all of the same design, can be swapped from position to position. Instead of a "backpacks/frontpack" style carry, simply by changing the straps from top-to-bottom, to top-to-top and bottom-to-bottom, giving you an "around the neck, around the waist" configuration.

All the straps feature a slide adjustment and an elasticised loop to secure loose ends.

This is the classical "Plate Carrier look" and it's a little more conspicuous, but certainly more secure. Wearing the carrier in "frontpack" style, when leaning forwards, it was occasionally tricky keeping the carrier in place, unless I had another pack on my back pinning the straps in place. Good for backpacking and travel in unusual and possibly insecure places, but not full-time.

For the best performance and security, over-the-neck is the way to go.

I've been looking for a means to carry a laptop about. My CSI folder is awesome, and it carries my iPad about in safety, either inside, or slipped beside it in my Bullock Echo daypack, but the Simple Plate Carrier offers the modularity of a inconspicuous armor carrier for a little urban insurance, as well as a means to carry a laptop, and an iPad around safely and securely.

I felt there wasn't much padding for the bottom edge and sides of the laptop compartment, but that was easily solved after-market with a sheet of closed cell-foam. I really liked the lines, and as always, the multifunctionality of the carrier really appealed to me.

Just be sure to remember that neither the iPad or MacBook's are bulletproof .... not to mention cutting boards .... be safe, be equipped and know the limitations of your gear...

Review: Triple Aught Design - Amphibious Cargo Shorts

As it heats up, I wanted to get some shorts that would both fit (yes, I have apparently grown as I have matured and done more running) and would be able to take with me whilst camping or adventuring. One such adventure was the Stampede Mud-Run, which I will discuss in a post soon. I had been in touch with Mr Tay Choon Mong of HorNest, and he put aside a pair of the Triple Aught Design Amphibious Cargo Shorts for me.

I'd been a fan of the TAD Gear for a while, and when I saw their line of Amphibian Cargo Pants get some screen-time in the blogosphere, I kept my eyes out for what else would come from these guys. I already have a couple of little things of theirs: patches and Ranger-eyes so I was looking forwards to more. There were no exception.

Made from an "Amphibious Cloth" which is to say 100% Nylon (3.4 oz) with a DWR Finish (Durable Water Repellent), the material is silky to the touch and light. You can see a 1" loop field poking over my right thigh, with a TAD logo Ranger Eye glow in the dark patch fitted to boot (Thanks Hornest!)

Made for movement with a gusseted crotch, and clean seams, they provide unrestricted movement running or clambering, whilst still being comfortable when I am chair-bound. More importantly, they are "Engineered for Abuse" with triple needle stitching on the in- and out-seams, and the pockets and seat are also reinforced to enhance ruggedness.

What about pockets? Well let me get you going here: These shorts are constructed with five sets of pockets! From the front you can see Two Front Welt Pockets, which each having a D-ring hanging from below the belt loop, these were both deep and broad enough to take my iPhone 4s in its Opt Silicone Armor iPhone case, and the carabiner on the bottom of it clips nicely onto those D-rings. They also make good attachment points for my paracord lanyard.



Two hand pockets, come in where you might normally expect them, and also feature a deep (two knuckle) coin pocket, which is probably sufficient to hold a pistol magazine, if that's your thing.

The thigh cargo flap pockets sitting mid-thigh passed my favourite test, they fit my iPad1, but more importantly, feature with hidden dual-button closure, with drain hole grommets. I put these to a good solid test at The Stampede and can report not only did I NOT scoop up pocketfuls of mud, but the water that I took on rapidly drained away. and Thru Slot. You can see the length of fabric ending with a D-loop poking over the top of the iPad here. This sits inside the cargo pocket, letting you secure items, but it doesn't stop there. On the seam-edge of the cargo lid flap, is a cutaway gap, allowing you to feed items into, or have them slung out of the pocket! Cables, cord and tubes, oh my! I thought I had torn the stitching, and was thrilled to see it was a feature. Awesome!


On the backside, the two rear flap pockets feature the same hidden dual button closures as the thigh Cargo pockets, which not only means your gear stays in, but the wilderness stays out! I don't often use my seat-pockets, having a bony ass, so being able to button-up and forget is a great option for me.

One really exciting feature that I only noticed after washing them inside out was the two hidden passport pockets on the rear inside, hanging off the back of the flap pockets, to hold your personal documents discretely: passports, tickets, visas, whatever. They aren't waterproof , so be advised you'd need to wrap whatever you stuff in there, but a great option to have when traveling in unpleasant places.

All the buttons are affixed with nylon webbing with bartack stitching for greater staying power and quick repair out and about, rather than being sewn directly to the pants. The fittings are all plastic, making these, when combined with a nylon belt buckle seen on the 5.11 TDU belt, make these an airport safe pair of pants! I "go commando" and they are very nice to wear, the gusseted crotch, and clean seams really coming to the fore there.

Probably the best thing I can say about these shorts are how well they fared in some pretty rough conditions. The Stampede mud-run may have only lasted two hours, but I was climbing over logs, crawling through mud and rocks, running through ponds and mud-pits, and they just shook it all off.

Have a look at the picture and tell me what you think. If I hadn't wanted to wear them to work, I think I could have just hit them with a stick a few times and knocked the dust off. They dried off SO quickly, that the only reason I was damp was what I was wearing under them.



Totally worth the investment!

Review: Maxpedition - SITKA-S Gearslinger Pack

A friend of mine recently "downsized" his regular daypack, and tells me he's very happy with the choice he made, so I wanted to have a look at the pack, and share his feelings and my own observations. This is the Maxpedition SITKA-s Gearslinger. The "S" is for "sinister", as this is the "lefthander" version of the pack. The regular version is exactly the same, just mirrored for ease of use for righties. That was a really nice touch right off the bat, and i was impressed that they offered this version as standard. It may need to be ordered in, but the fact the manufacturer offers it is a big tick in my books. The good folks at LE Gear got this one in for my friend.

The idea of this particular pack is that it will carry all your needfuls, without bulking up or weighing you down. It is jam packed with attachment points, pockets and pouches, but most importantly, it compresses and packs your gear down to reduce bulk. Very important if you have a lot of traveling to do, which is one of the reasons my friend got it, for a long trip OS.
Right from the get -go you can see that the pack has a lot of features, and I'm going to try to cover them as best I can. It is made from the same 1000d Cordura, triple polyurethane coated for water resistance that features in a lot of the gear that I have reviewed. I love this stuff, its hard wearing, and when coated with Du Pont Teflon® fabric protector, sheds rain and crud and takes a beating. Its single-sling layout puts the strap crossing your body, and it sits nicely. When tightened there was no feeling of it slipping around when walking about, but for additional security, there is a "third-leg" strap tucked away in the bottom to make an inverted "Y" of strapping should you feel the need.

The padding at the back is really nice, and the top handle is also padded.



Behind the padded backing is a pocket with ports for a 3L / 100oz hydration bladder, with all the fittings, including retention cords and loops on the main shoulder strap for the tube. There is also a 1L / 32oz Nalgene bottle pouch off to the shoulder-side edge. It looks like it would also fit my 1L SIGG bottle too. (Although the dimensions are different).

As well as the hydration bladder pocket, there are three main equipment pockets: The large compartment is 15"x 8" x 3" and features a variety of internal storage, including a Fastex stule compression strap, a zippered pouch and a wide  loop-field panel for presumably attaching a concealed-carry holster, or your collection of patches, in my case... A small laptop might fit, my iPad certainly would.

The top-front pouch is 7.5” x 4”  x 2”  and features internal organization in the form of wide elastic loops, and a pocket, as well as externally, with  a wide belt of hook-and-loop loop-field running the width of the pocket, over which is stretched a loop of shock-cord. This pocket sits up high and is good for a lot of smaller items, as you can see, my friend left his iPhone earbuds in one of the loops, to give you an idea of scale.

The "Y" shaped compression strap has its arms crossing this top pouch, with a Fastex style clip joining the leg between the two front pockets.

All the zipper pulls feature a paracord toggle, rather than a metal tab, removing  the metal-on-metal noise generation these can otherwise give, a great addition I thought.

The bottom front pouch measures 8” x 7”  x 2”  as is also jam-packed with internal organization, pockets and pouches in the lid and the body of the pocket, as well as a retention lanyard give you a wide range of locations to stash your needfuls and keep them in place for when you need them.




Another great feature of the bottom front pocket is that it has a theft-deterrent  press-stud, which holds the zipper in place to reduce the success of a "yank-and-grab" thief.

The bottom front pocket also features a four row, 2" wide tow-channel band of  PALS/MOLLE loops, as well as running the compression strap through to the base of the pack.

Ther is also a channel of the same 2" wide PALS/MOLLE loops along the "off-shoulder" side which, as well as two at the base of the shoulder strap, giving a wide variety of accessory attachment points.





One of the outstanding features of this pack though, is its ability to be accessed whilst still being worn. Being a single-shoulder pack, it can be slid around the body, much in the same was as my Crumpler Messenger bag, allowing access to all the pockets and pouches, one-handed, to get at your needfuls, (or those sneaky CCW panels) without dropping your load, or having to unsling anything you might have loaded up over your other shoulder.

My friend is really happy with his pack, and I was impressed too, it was really well put together, with all the internal finishings well-sealed and stitched, I expect it will last him a long time. Apparently it makes a good pillow too, there is something to be said for a daypack that you can rest your head on when the opportunity arises. As the man said "Somebody wake up Hicks"

Review: Going Solar!

When the going gets rough, and the lights flicker out, we will want to power and run our gadgets and drive back the night with the familiar glow of electric lights. I've been collecting solar chargers for a while now, and I thought I would give you a quick review of them.

First up is the B-Squares Modular Solar Electronics which I backed on Kickstarter. This allows the user, in theory, to run a USB outputting rechargeable triple AAA charger, a set of LED lights, or a iPhone charger. The single solar square generates 0.325W of power, which is enough to run the LED's, charge the batteries or run the iPhone. Or at least, it's supposed to. I have had little or no luck with it, and am afraid to say I've been very disappointed with this device. 

 The second of these devices is the original Solio Universal charger which is a mains-capable charger, with a battery pack. It folds out into a tri-leaved floret  is capable of output ranges from 1.5 to 5W, the internal rechargeable battery has a capacity of of 3.7V 1000mAh. It comes with a variety of output ends for the included cables and will even charge iPhones via a USB output. One cool feature of this is that it can be orientated by feeding a pencil through the central hole, propping it up to achieve maximum solar  contact. I've been very happy with this device, and take it camping and adventuring with me frequently.

Lastly is the solar charger that came with another Kickstarter project, the Packlights which I have previously reviewed. I delightful sweetener to their deal was the inclusion of these purpose built charger and battery packs. Also mains-chargeable, these these packs generate  0.77W at a Voltage of 5.25 +- 5% and the internal battery has a capacity of 2200mA with an output of 5.6V at a maximum current of 600mA. It includes a USB output, and both a bright LED light, and a dim LED charge indicator. Another interesting feature is that they give estimated times for charging, which are: by Solar Charge:10-14 hours depending on lighting & weather conditions and by DC Charge: 2-3 hours where the charging current: 140mA (per hour). This is a really nice package, and I'm very glad i acquired two of them. They fit nicely stowed into one of the Platatac FUP pouches so I can imagine wearing them out in the field, ready to recharge my tech. 

Review: OtterBox Utility Latch

Here is a piece of kit that came to my attention following a comment by one of my readers after my review of my iPhone case . Up till then, my iPad has been naked tech, no case, cover or guard. It still lives in my CSI folder which in turn lives in my messenger bag but doesn't do anything for it when I'm -using- it. So here is what I have added to give me some more security and functionality. This is the OtterBox Utility Series Latch . The basic idea is that four elastic loops attached to a nylon webbing backing hoop over the four corners of the device. A loop of nylon tape gives an attachment point for the included S-clip.


That however is just the beginning, that nylon backing is a platform for a variety of very clever accessories. The webbing itself features a wide handstrap with removable padding that can either be gripped or slip over you knife-hand style. Because the central webbing is square, and the elastic loops are all equal, the device can be held portrait or landscape, as best suits your needs. Each corner of the webbing hosts a plastic tag with an eyelet, through which I have fed a length of shock-cord, purely as an extra place to secure any documents I get handed in meetings I don't take my CSI folder to.
Those tags are designed to take the accessory baggie that comes with the Latch, which is itself billed as a "angled stand" and performs this task well, with twin S-clips to again give portrait or landscape proppage, but I found it to be awkward to carry around with this in place, and have relegated it to my messenger bag, for when I need it. The included accessories are pretty cool in and of themselves. A rain-cover made of elastic hemmed waterproofed rip-stop. I'm not sure how useful this will be in a big wet, but for times when I am without a bag to store my device in, or when I know I will be in and out of a drizzle, or something.

The narrow shoulder strap will let me go hands free in a slinging fashion, should I desire, or offer me a platform to write on if i balance one edge of my device on my belt buckle. Seeing as I can type one handed on my iPad, and use the big S-clip to secure it to my holster-harness or riggers-belt I haven't had much use for this either. The wide elastic belt, however, I am very much looking forwards to using. It affixes through the main-body webbing, where the yellow nylon can be seen in the top picture, and becomes either a thigh-strap (for pilots, drivers, or boring meeting Angry Birds players) OR it can be fitted to the back of a car seat head-rest, for running back-seat movies and games for little people amusement. A very cool feature, with a lot of potential. The buckle end is sturdy, and the hook-and-loop fixture is long enough to fit a variety of legs I think.

Whilst I cant say this is a ruggedising or especially protective piece of kit, and I have had a couple of occasions where the elastic loops have slipped, and lost full grip on my device, which was a bit scary, I like how well it fits my grip, allowing me a much more natural tap-tap-tapping stance, without having to white-knuckle as I wander about reading my ITS Tactical App or browsing for more toys. A relaxed body responds to change much faster than a rigid one. One thing it does do to protect my device, is that the elastic loops act as spaces for me screen, padding and buffering its contact with whatever I put it down on. No more gran of sand scratches!.