Review: Hazard4 Labs: LaunchPad iPad sleeve

I've been keeping an eye on the upcoming products from Hazard4 Labs, who made the replacement to my old harness, the  RG harness that I keep the majority of my EDC in.  

They have finally released their Poncho (review coming soon!)
and I got one of these very cool cases thrown in for good measure, along with another item, which I have not yest started testing.

This is the LaunchPad iPad sleeve.

Made to fit the iPad 1 and iPad 2, with an internal capacity 28.5cm x 21 cm (11.1" x 8.2"), the sleeve is constructed from an Invista® 1000D Cordura, giving it a very rugged and scuff resistant exterior. The interior is lined with a faux-suede material which has been quilted over an internal padding material.

This gives a really nice body to the sleeve, and not only provided non-slip carriage for my iPad, but also proffered a not inconsiderable level of bump, drop and scratch protection to it. 

Two grometted (and screened) air-vents prevents that puffiness that padding can get from time to time.

 I'm not overly precious with my technology, as my collection of screen-guards and cases will attest. I've found that my iPad screen has taken several rough trips when I've over-packed my Bullock Echo daypack, with my iPad sitting loose in it's helmet carrier section. 

Exactly the kind of abuse the LaunchPad will protect it from.

The internal closure is from two patches of hook-and-loop, which features cleverly recessed hook-fields, really improving the sleek lines of the sleeve. The main closure is provided by a shock-cord loop, with a sewn-webbing pull tab, that is fed through an eyelet in the lid, and hooks around a plastic tri-glide buckle.
 
The back side of the sleeve brings its own set of goodies. Four rows of six channel PALS/MOLLE line the back, with the top three rows sporting loop-fields between them, for ID patches (or in this case my ITS Tactical membership tab). The idea being that you can attach accessory pouches to the sleeve (for chargers and cables, or whatnot) or mount the whole sleeve to something with PALS/MOLLE strips like the MOLLE Stix, Blackhawk S.T.R.K.E. speed clips or the like. I could see this on a pack, or the back of a plate carrier. 

At the bottom left of the back of the sleeve is the final feature, the steel "carbine type" triangular gear loop for attachment of a carabiner, keychain, or wristloop. I haven't yet hooked anything to it, still looking for the right combination, but it's a really thoughtful addition to an elegantly constructed and designed tablet storage sleeve. 

The sleeve isn't water or dust proof, but it does offer almost total coverage, and the Cordrura is water resistant, at least. Consider it a 3-season tent for your tech.

Review: Platatac - Leg Rig

I was looking over my collection of gear and realised there were a couple of items that have quietly gone un-reported, little pieces that seemed to take a back seat over their flashier cousins, and I wanted to give them some web-space too


I've shown this piece, in use, a couple of times, in my "No, Really" post, and coupled with its usual attachment, the Young Guns belt. However, it deserves it's own review. This is the 3/4 Leg Rig by Platatac.


I've covered a drop-leg holster in the past, and I have to be honest, they bring out the Han Solo in me ...

This was an early model of their now more mature Leg Rig but it serves me just fine. The three main features of the rig are: a  3 channel by 3 row PALS/MOLLE field, which is built on top of a 1000d Cordura with a stiff plastic reinforced backing platform.

Twin straps wrap around the thigh, and are half elasticized and half webbing backed with hook and loop. This gives you two different ways that you can adjust the fit, as well as it having sufficient flex to accommodate the changing dimensions of the thigh whilst running, climbing or scrambling. Anyone who has worn a non-elastic cuff whilst doing any of that kind of thing will tell you, its no fun. Two bands divides the load, and gives you a better fit to the shape of the thigh.

The "inside" of the rig shows us the way the mounting strap attaches, with a hook backed strap and a loop-faced side on the inside, to avoid abrasion. This gives you a really wide latitude for adjustment up and down, to ensure the best fit for your rig.

This was really good for me, as I have really long skinny legs, getting a thigh rig to sit right can be a real pain for me.  The thigh straps are free-sliding, and run through the middle of the rig, meaning you can customize the buckles and which thigh you wear it on to suit your need.

On top of the mounting strap, connected to a slider ring, is the belt clip. With both a hook and look backing, and two press studs, the belt clip not only bites down hard, and is adjustable for different bet sizes, it can also be woven into the middle of a riggers belt such as the 215Gear Ultimate for an extra secure and non-slip fit.

You can add any PALS/MOLLE capable item to the rig, I usually wear mine with my Drop Gas Mask bag as a dump-pouch, but could just as easily fit it with any 1, 2 or 3 channel PALS/MOLLE kit I wanted. The newer Platatac leg rigs are 4x4, giving the wearer a little more real-estate to mount on, but i have skinny thighs, and plenty of pockets already. I've been considering getting another, in the "more subdued" black to wear out and about, I've had similar rigs in past, but my colour pallet has lightened over the years...

Review: Platatac - SGL 5.56 stacker pouch

I haven't done one of these for a while, and have been feeling remiss, but here is another pouch, my not-so-secret guilty pleasure.

I've been trolling their eBay listings, and found this great item from Platatac. It's well worth your while to have a look at these "factory clearance" listings for a chance to sweep up some unusual, trial or end-of-stock items. This pouch for example, is their SGL 5.56 Stacker, not listed on the new updated website. Collectable, even!

It is clear that the SGL stacker shares lineage with the much loved FUP and Mk1 60rnd pouch. I also noticed that there were, as I've come to expect, some very interesting design features and little extras tucked away.

Made of the rough and tough 1000d Cordura I've come to expect of Platatac accessories, the pouch consists of a long tongue of webbing, sewn into the base of the front of the pouch, which then feeds into itself, over the top of a stiff webbing loop that acts as a base-stop. The tongue travels up into the pouch, over the top, and fixes with a broad band of 4 loop-field strips.

Running from one side to the other, in the middle of the pouch, is a 2" band of elastic, which acts as a built in compression strap, locking contents into the pouch. The band is sewn into the backing panel, and runs freely under the middle two bands of loop tape that make up the closure system on the front of the pouch. This makes the pouch extremely low profile when empty, as the elastic binds it right down.

I was interested to see how the bottom loop of webbing acted to hold contents in, but when combined with the long, wide webbing tongue, it locked in nicely, and didn't give me any worries about storing my iPhone, a notoriously droppable commodity.

Here's one of those little additional features I was talking about. When I first got the pouch, i just dropped the tongue through and flipped it over the top. It worked, both closing out the bottom against the webbing loop, and made a positive lid closure over the top and front.

What I didn't initially notice, till I looked properly, was there was a big wide band of loop-field running about mid-way through the pouch, that allowed you to feed the tongue under it, giving a much more secure connection, ensure that you don't accidentally feed a magazine "behind" the tongue to drop the bottom inconveniently, but also with its loop-field fronting, allows you to back-feed the hook-ended tongue in to make a more "high-speed/low-drag" option for those of you who like that sort of thing, without needing to cut away the webbing.

The backing is standard for a Platatac pouch, with twin sets of PALS/MOLLE loops and press-stud closure tabs, but its also worth noting the built in loop, for extra attachment options.

I was uncertain how this pouch would stack up (so to speak) but was pleasantly surprised. Obviously, its primary purpose is to house 5.56 magazines, and certainly has the length to accommodate quite long options, without the bulk of a full-cupped bottom like the FUP. This does however mean that it is somewhat unsuitable as an accessory pouch, as small items will be at risk of falling out.

 This is a really interesting piece, and it was also very interesting to see how the range has developed.

Stay tuned for more as they come up!

Review: TruSpec Combat Shirt

 I snapped up this shirt from eBay, and have gotten a lot of utility from it. Not surprising considering its design origins.

This is the TruSpec Combat Shirt from Atlanco.

The key thing about this kind of shirt, and the reason I wanted one, was that it combines a 60/40 cotton/nylon blend t-shirt material body with a rugged 65/35 polyester/cotton ripstop blend arms and shoulders. Cool and comfortable torso, tough and rugged arms and shoulders for hard wear and outdoorsy adventure.

Basically I wanted a work shirt that would be good to wear in the long hot Australian summer, in or out of my gear. I always look first to military gear, because i know that it is often built extra hardy, and, essentially, for badassness.

The TruSpec shirts however, have added functionality that is well worth covering. As well as being a breathable, wicking and fast drying ,aterial, the "No Melt, No Drip" Cordura Baselayer fabric is reported to reduce the severity of burn injuries and helps protect against flash fires.

Considering my proclivity for being too close to fires, both controlled, wild and just being stupid, I thought this was a great additional feature that whilst I didn't intend to test to stringently, would come in handy.  As well as what it is made of, the folks at Atlanco gave some thought to those who might be wearing it, and what other utility they would look for. Both biceps house a zippered storage pocket, angled for ease of use.

They also feature loop-fields for attachment of patches, here i've got one from Strike Industries, who make the Simple Plate Carrier pack and Tactical Sling Catch i'm so fond of. 

I've also got a double sided call-sign panel from PatchPanel and one of their IR IFF squares in the built in tape-covered area. Very clever way of making this a "need-only" system of ID.

The other arm features flag, rank and nametape fields, as well as the zippered pocket.

You can also see here the padded elbow patch, with its double stitching and placement to really add to the build.

It was also great to not e that there were no shoulder seams, and all the seams were flat, which really minimizes chafing and pinch-spots, especially noticeable when carrying a pack, or doing repetitive work like chopping wood or digging in a field.

I also liked the cuffs, which also featured hook-and loop closures, to keep nature out, but also the gusseting that kept the fit true.

They offer these in several different sizes, in a variety of colour schemes. I opted for Large/Long in order to accommodate my super long arms, but could have done with a "medium" body fit, i think. The Khaki/Sand option sat nicely for me. You can see here how the tough shirt sleeves poke out of my First Spear OAGRE vest, whilst my torso has the softer wicking cotton/nylon t-shirt.

All in all a very comfortable, rugged and practical shirt, and one that I expect to get a lot of hard wear out of, no matter what I throw at it, or myself into.

Review: Hardcore Hardware Australia - LFK01

Every now and then my out-doorsy/quasi-military aesthetic meshes with that of my very stylish partner, Omega and there will be "oooh's" and "aaah's" over the same things. A good example of this would be my prototype Urban Dax pants, or the Nukotool TiGBi skull-keyring I acquired for her birthday last year.

In keeping with the close personal defense theme,  when popping in to Platatac to shoot the breeze one weekend, with Omega and Tactical Baby along for the ride, I casually pointed out the pointy-cabinet to her, and was thrilled when she singled out this beauty from Hardcore Hardware Australia, their LFK01I took note, and months later, presented this one to her.  

HHA are a local company, who state that their "primary function is to design, develop and construct mission specific tactical tools for Military, Law Enforcement, Fire, Search & Rescue personnel". 

My kind of makers!

The LFK01 is a wicked Recurve trailing point fixed blade, a format that especially appeals to Omega, and in this case, there is plenty of substance to it. Measuring 168mm in overall length, with 70mm of blade, this little piece is designed to fill the gap between a full sized fixed blade, and a folder.

Weighing in at 180g, this is a dense little knife, and a lot of that mass comes as a result of the bulk of the knife being 6mm D2 tool steel. D2 is a high chrome content steel, which HHA note is sometimes called "Semi-stainless", has excellent edge holding capabilities and extraordinary wear resistance. They heat treat the blades to bring the hardness to 56-60HRC, which is given a Teflon coating to reduce any corrosion that might occur, as well as reducing glare and the maintenance required for it. A thin coat of oil is all HHA recommend if it is stored or exposed to wet environments.

Here is a good shot of the blade, showing the thick body, with its broad, 44mm grind. This is a blade that is no nonsense, and will take all the punishment you could dish out. Its heft reminded me more of the KA-BAR Zombie Killer Tanto than any other blade in my own collection.

The spine of the blade features some subtle crenelations, giving ample purchase for a thumb-grip, without catching or digging either your hand, or on your gear, when worn.

Between these two pictures you can see the profile it gives in the hand, as well as the aggressive angle it sits in. This is a blade that will make a mark, and leave a lasting impression, without having to give itself away unnecessarily.

A Mil-C-5040H Type III paracord wrapping give very strong positive gripping, and adds shock-resistance (although with a knife this size, I cant imagine you would get much impact shock.

The cord is treated with a proprietary acrylic solution to keep it in place, tidy and clean, but apparently wont interfere with using the cord in a survival situation. Great logic guys! The pointed pommel can also be depended on to leave a lasting impression.

The very hungry edge is constrained in a two part carry system. A 100d Cordura outer which includes in the back a MOLLE attachment system, with one channel worth of press-stud fixing tab in place. The inner layer is a folded Kydex insert, and is designed to allow ambidextrous wear of the blade.

This is further facilitated by the central placement of press-stud retention webbing, which allows the blade to be seated left or right, facing up, or down. I fed some paracord through the provided eyelets, and with a cord-lock, quickly converted this into a neck-knife for Omega to wear out and about. Quite the talking point at some of the more exciting events we attend.

This is a beautiful, brutal piece, thoroughly efficient, uncompromisingly rugged, and everything I could hope for in a gift for a loved one.

Review: Platatac - FAD Carrier

FAD carrier pic from Platatac's website, FAD in place

A little while back I went in to Platatac asking about how I could mount my Fiskars log-splitter to my kit when I was camping and tramping. I tried out their exceptional (but not quite fit for my purpose) FFE Holster. One of the other suggestions was to use one of their other pieces of kit, the FAD Carrier. Designed to carry a First Aid Dressing kit, this lightweight platform was easily re-purposed to suit my need.

I love it when a plan comes together.


The key to this piece are the webbing eyelets that are found at each corner, two to each corner in fact, one "inwards" and one "outwards", mounted to a light nylon panel with two sets of PALS/MOLLE straps on the rear.

In the unadulterated original format, a length of shock cord is cris-crossed through those eyelets, with a cord-lock to cinch it tight. This enables the user to stow a FAD securely and yet readily accessible at a moments notice by simply grabbing and yanking it free. Crucial for when saving seconds mean saving lives.

You can see here the twin webbing eyelets which I have rethreaded with a length of paracord as I found for my purpose, the shock-cord was too springy, under the weight of my axe. Looped paracord, held in place by those eyelets did the job perfectly.

The whole thing doesn't measure more than 8 cm (3") to a side, and given the placement of the eyelets, can be rigged horizontally or vertically, to suit your need.




A quick look at the rear shows the PALS/MOLLE panels that are ubiquitous to all of Platatac's gear, with its 2 channel, 2 row configuration.

Whilst a little tricky to get affixed, at this short a length, once attached this is a rock-solid platform.

In fact, the carrier was so solid, that I wanted to give it a try in a slightly different configuration, as a mounting system for my much loved Zombie Tools Deuce sword.

You may recall I showed off one carry option for the Deuce in my Apocalypse Equipped; No, Really Mayan 2012 non-event post, where I had it lashed through an eyelet to my 215 Gear sling but I found that the Platatac FAD worked a treat.




 The eyelets of the carrier matched almost exactly with the eyelets in the scabbard of the Deuce, and when lashed in with the same paracord I had used to secure my axe, I found that I could create a PALS/MOLLE fixture to my scabbard in up to six points along the scabbard.

This meant that I could wear it on a belt, lash it to my rig, or a pack, or pretty much anything with 2x2 PALS/MOLLE. The same would go for any other kit y0u needed lashed.

So, from a tiny piece of kit, so many opportunities arise. I really like this, and it was such pure chance that just by talking out what I wanted to do, the idea came to use the FAD carrier.

Brilliant!

Review: Blackhawk - Removable side plate carriers

If you've been a long time reader, you'll know a few things about me: I'm in Australia, I'm not MIL or LEO, but I have a keen interest in modular, rough and tough gear that I can make use of, and am more than happy to take existing purpose-made kit and modify its usage to fit my own particular need and resources.

I'm fond of armour, having been a practitioner of kendo for 16 years, and LARP type silliness, as well as a variety of adventurous pastimes that might involve a reasonable amount of blunt force other trauma. I've covered both helmets and plate carriers before (like the Platatac MAC, Strike Industries SPC and others). I've also cover lots of pouches, big and small, so when a chance to acquire some modular plate carrier pouches came up, I jumped on it.

More armour, more places, more pouches? yes please.

This is the Blackhawk Removable Side Plate Carrier It comes in pairs, and is designed to fit the Blackhawk 6” X 8” Level IV plate which is a formidable piece of armour that is outside my scope or means, but goes hand in hand with this piece.

So, what is it, and why is it so cool?

Constructed from 500D Cordura, this light but tough pouch is sewn on three sides, with a hook-and-loop mouth at the top, featuring two webbing loops at the lip, to give you purchase to open it smoothly.

On the face and back, PALS/MOLLE webbing runs in a 4x4 grid on one side, and a 3x4 grid on the other, such that the webbing on one side complements the other, rather than mirroring it.

This give you two different fits, depending on how you want to attach it to whatever you are mounting it to.

The concept of these is to give the wearer a pocket to carry a plate, on a vest or rig that otherwise doesn't have that option, wither a Front/Back configuration or a cummerbund that's just "all PALS/MOLLE and no plate pocket". The MAC cummerbund I have does have those pockets included, which as I've covered before, I have filled with polyethylene cutting boards both for space filling bulk, rigidity and also or the blunt-force trauma and stabbing and cutting protection it offers.

Sure its not ballistic protection,  but to be honest, the chances of me needing that level of protection are very slim given my situation, AND its not legal for me to acquire here anyway.

I took one of those boards out and fitted it into one of the carriers, and closed it up. Instant extra armour panel, brilliant. I fitted it first to the cummerbund, and this was where the complementarity webbing came in handy. I could choose to have it ride a little high, or a little low, just by flipping it.

Modular, light and configurable. Nice.

The "removable" part comes to bear as a result of the attachment method. The panels each came supplied with three of the Blackhawk 7 width Speed-Clips which slip in and out of the pouch to the substrate and then clip in to the top and bottom layer.

One thing I noted was that the PALS/MOLLE channels were standard 1" i n the middle two channels, but 1.5" or so at the edges, which when combined, gives you a -5- channel reach, as needed. Again, good for configuring your rig to best fit need and comfort.

Another aspect of this is that you can layer these panels over the top of regular plate carriers, and put an extra layer of armour between you and harms way, in modular fashion, without loosing PALS/MOLLE real-estate.

Here you can see I've put the pouch on the front of my MAC. No reason though that you couldn't put this on a pack, a thigh-rig or anywhere else with 3 rows of MOLLE webbing.

One of the "alternate" uses I thought of was as a admin pocket, for paperwork or other flat items, perhaps a Kindle sized tablet (it doesn't fit my iPad 1), as a thin dump-pouch, or even as a boot to catch a large slung item, like my axe or even perhaps, my Deuce.

All in all, this a pretty neat accessory, even when its primary purpose isn't applicable, having a rugged, seal-able and modular pocket is ALWAYS a good addition to your load-out.

Review: Platatac - FFE holster

I've mentioned before how good it is to be able to go to a supplier with a problem, and ask for solutions, without getting a hard sell. It's one of the reasons I am so fond of the Platatac guys, and why I point people in their direction when I get asked for equipping questions.

Here's a case in point.

When at Confest I did a bunch of wood chopping with my trusty Fiskars logsplitter and needing some way to carry it about, I slung it behind my Bravo hydration pack. Not very comfortable, but it worked. I wanted a better solution, and posed it to the guys at Platatac.

This is the Fix Freaking* Everything FFE holster. The idea was that the head of the Fiskars axe could sit in the throat of the holster, buckled down and snug under the dual press-stud and hook-and-loop safety of the fully adjustable retention straps. Alas, it was not to be, the geometry of the axe and holster just didn't match up.

However, I did get to play with a very cool holster, which they kindly loaned me to test out the theory.

Here's what I can tell you about it.

Constructed from the same 100d Cordura that almost all the Platatac range is built from, this multi-layered holster is stiffened throughout with extra stitching and layering. This gives it a very sturdy and form fitting shape, perfect for weapon retention.

The back side features two channels of 4 row PALS/MOLLE strapping, which gives a very solid attachment to a chest-piece, thigh rig or belt.

Opening up the outer layers, you observe the multiple sandwiching sides of hook-and-loop, giving you a wide range of customisation, both in models of handgun (like, in the extreme, my Plastation lightgun used here) and also accessories (lights, sights).

This is accomplished by having those overlapping layers of double sided hook-and-loop panels, allowing the fit to contour to the system carried. You can see here that the retention strap itself can also be adjusted, to conform to the  back geometry of the pistol retained.

Unfolding further, you can see that the inside of the holster also features a webbing loop, to form a pocket to contain the muzzle end.

From this angle you can also see the snap end of the press-stud retainer. This is also adjustable, but is very tightly fitted between two very closely sewn layers of hook-and-loop, making it a tricky operation, but a very ridged hold when in place. This retainer is further stiffened with a rigid plastic core, for added security.


 Opening the holster up flat exposes more clearly the single channel of three PALS/MOLLE loops, allowing the addition of a single pistol magazine or accessory pouch, to the leading edge of the holster.

Comparing this to the drop-leg holster I reviewed a while back seems unfair, because this is obviously the real deal.

So, an experiment that didn't work out, but a very useful one, and in the end, I -DID- come up with a solution to the "carry the axe about" problem, with the help of the guys.... to follow soon ....



* Actual wording my vary, but I adjusted for delicate USAnian readers.

Review: Tactical Tailor - MALICE 2 pack set

Here's the third installment of reviews for KitUp!'s David Reeder, and the inestimable Casey Ingles of Tactical Tailor. I've been so pleased with the other kit that they sent me, I've been somewhat hesitant to begin on this next review, given its magnitude.

However, it's just too awe-inspiring to hold it back any further, so here we go.

I've always wanted an ALICE pack. Since childhood I remember putting it on Birthday and Giftmas lists. 

The combination of metal frame and hefty pack have been of great interest to me, from my earliest camping days.

So, without further ado, let me introduce to you the MALICE 2 kit from Tactical Tailor.

This MODIFIED All-Purpose Lightweight Individual Carrying Equipment pack is jam packed with improvements over the standard "lowest-common denominator" issue pack, and I'll get to those points as we go along.

Probably the first thing that strikes me about this pack is that it is BIG. With a main compartment capacity of 53L (3276 cu") and a whopping total capacity of 75L (4556 cu") That is a whole lot of ruck!.

Here is what it looks like when I filled it up, and threw it on. See lower down for what I filled it with. Lets just say a LOT.

As you can see, this is some serious pack! The kit itself comes in four distinct parts; the main pack body which constitutes all the storage, the Super Straps which are the heavily padded shoulder straps, the Super Belt which is the padded hip/kidney belt and the frame These all come together to form the MALICE2 -kit-. Each are available to add to, upgrade or replace a standard ALICE pack component.

I'll be honest, in that I needed the provided instructions to put it together, as there's no shame in RTFM.

So here's what I can tell you about all the parts:

The frame is built from light weight metal tubing, just like a racing bike, which is reported to give a 30% reduction in weight compared to other  pack frames. This frame is welded, rather than riveted, like the older issue-frames,  while increasing strength and rigidity over the issue ALICE pack frame. Apparently one key issue with those frames, apart from being flimsy, were the popping of rivets, leaving metal ends flapping in the breeze, ore more accurately, finding nice solid fleshy places to jab. Yeah. No thanks! The welds are really solid, and there is NO flex, sway, or signs of weakness in this frame. Rock-solid quality, powder coated to a smooth finish.

The frame also has a crossbar, which in fact rather than just joining the uprights, bends away from the body, creating a  space between the pack and your body. This is ace for not only keeping an air-flow gap, but also keeping the bulk of the pack up and off. The spacing of the frame also lends itself to go around standard sized (10"x12") back hard armour plates, something that hadn't occurred to me, but a brilliant idea!

The Super Straps are reported to be twice as long as issue straps, a real bonus if you are already bulked up with a plate carrier, warm clothes, and allows the use of a cool item like the MysteryRanch Cinch Straps to fix it snugly over a plate carrier. They  are made with 3/4" thick foam padding for added comfort under heavy loads. They are also are contoured rather tan just straight, to fit your shoulders and feature an adjustable sternum strap which helps distribute weight and keep it loaded tight to your body.

The Super Belt is much the same, except it utilizes 1.5" padding to maximise a comfortable ride of the pack. It features a big dual-adjusting front fastex style buckle and side ALICE style webbing attachment points to allow additional modular gear to be attached directly to the belt. Mounting the belt to the pack was a snap with the two adjustable buckles which just cinched it on tightly, this apparently replaces the 'ratchet' style attachment system on the issue kidney pad, which sounds like a nightmare!

The main pack itself as I said, is HUGE. The whole thing is made of 1000d Cordura, and features extra reinforcements of all  the high stress areas of the pack. The seams and all the finishings are top-notch.  

The main compartment is 53cm  (21")  tall, 35cm (14") wide and 28cm (11") deep. That might be hard to picture, but see below, for a good indication. You'll know when. That single main compartment has drainage grommets in the base, but is essentially a big open sack. For more compartmentalization , look to the outside! 

The front of the pack features two 6" x 7" x 4" and one 8" x 12" by 4" zippered pockets and on each side there are additional 7" x 10" x 4" zippered pockets. That's five big pockets lining the top of the pack. Below them are three more deep clip-fastening lidded pockets. I was able to stuff a set of cargo pants into each of these side pockets, rolled up, to give you an idea of their capacity and my Platatac Harry 1.2 Softshell Jacket in the middle one. We're talking a whole lot of storage here... Below the top row of pockets are two twin ALICE webbing loops, to give you even more modular attachment options, like for a canteen or e-tool.

You really CAN fit a whole lot in this pack.

Inside the top of the main compartment, in addition to the standard draw-string closure, is the additional Storm Flap modification, which sits inside the main closure, and adds an sphincter-like extension around the inside of the top of the pack to help keep things secure and dry. This also features a draw-string closure and really improves the packing security, easy of access when needed, and keeps the elements off your kit.

This is in addition to the built in flap that covers the whole of the top of the pack, secured with two long fastex-style clips on long webbing straps. That cover itself features another pocket, a
zipper closing 8" x 12" x 4" Claymore pocket. There is also a heavy duty 2" Nylon webbing carry handle at the top of the pack

Tactical Baby says RUCK UP!

She also objected strenuously to me trying to get her back OUT of the pack, and wanted to go for more rides. Considering she spent several hours worth of walking at ConFest in my Light Field Pack, I shouldn't have been surprised.

This is a serious mountain of a pack. 

Lightweight on its own, a heavyweight when used to its full capacity. The additional padding on the shoulder and hip belts are with no doubt a stunning improvement over previous offerings and I shudder to think what those old frames must have been like. The construction of this setup is without reproach, and I can see it lasting a lifetime. It truly warrants the "M" for Modified in its name but could just as easily stood for "modern".  This is a modern pack with classic lines, with rock-solid modern materials and construction philosophy.

Review: Tactical Tailor - Concealed Carry Sling Bag

This is the second item in my series for David Reeder of KitUp! and Casey Ingels of Tactical Tailor, and I am thrilled to be getting my hands on another pre-release item, which made it's way over the Pacific to me here in Australia. Due to be released later in March, hopefully this review will stir your interests and imaginations.

I'm always keen to include inconspicuous items to my repertoire, both in my EDC, and how I go about lugging it. Recent air flight trips reminded me that having a high density and easy to store carry-on bag is very desirable. My trial of the Zombie Outbreak Hydro Pack was a good experiment, but when it comes down to it, I want something rock solid. I am happy to say that the Concealed Carry Sling Bag by TacticalTailor is that. Made predominantly from a 500d Cordura, in blue-grey and black, this is a sporty looking pack that has a sting in its tail.



This is an ambidextrous pack, with a single central main padding shoulder strap, with twin detachable straps, with an interesting styled clip at the end of each, anchoring to a ring at the end of the shoulder strap. Each of the detachable straps features a long webbing, sufficient to create a "third leg" style wrap around connection, to keep the pack stable on your back when running, climbing and generally adventuring.

The shoulder strap is heavily padded with a breathable mesh covering, giving both really solid padding, broad coverage over the shoulder and a wide attachment to the body of the pack, giving a very stable connection. The top of the strap to pack connection also features a very sturdy carry handle. It appears to have a Helium-Whisper compatible loops down towards the strapping end, but I don't have anything compatible to test that out on.

Another nice feature is that both detachable straps have a padded "wing" for where the webbing would otherwise dig into your kidney, both of which have webbing stitched in, not quite PALS/MOLLE proportioned, but certainly compatible, if you wanted to affix an accessory. Topping it off, there is a pocket behind the wings on both sides to stow the detached strap, if not being used as a "third leg" to get rid of dangling cords for a more streamlined fit.

Inside the main compartment, which has double zipper pulls, each with a hefty cord pull-assist, which works to give out a full opening compartment, which as you can see can fit a variety of goods. When filled, this compartment nicely fits the depth of my Zombie Squad Nalgene, so that makes a good guide for how much stuff you can lug in this section.

Inside the front compartment, which is fitted with a long daisy-chain of webbing loops running vertically over it's surface, and sporting another two cord-fobbed zippers for closure, you'll find the first of two hidden surprises is pack had to offer. Fitted to the loop field that makes up the entire of the back surface, is an adjustable pistol holster. This hook-backed panel loops around on itself to give an adjustable width, and has an accessory strap to accommodate the length of your pistol. Off to the side of the panel is an elastic loop to hold a spare magazine. I've not decided what I will use this holster for, not having a pistol to carry, myself, but I'll be sure to find something to use it for. This compartment easily holds a Nalgene bottle, with some spare room at the sides.

At the very back of the pack is where the real secret lies. Behind a very inconspicuous zipper, blended right in with the seam of the grey Cordura and the meshed-foam backing is another cord-fobbed zipper, (one for each side of the bag for true ambi action) is the final compartment, held snug against your body, for the concealed carry win.

Again as with the front compartment, this has a broad loop-field panel, encompassing the entire back, and comes with a very thorough admin panel, but this can be fitted to the front compartments panel, swapping out to suit your needs. Currently I am keeping my iPad in is compartment, until I can think of a better use for it, but as it is, it's a very secure and stable storage pocket, with a billowing inside backing to accommodate your packing needs, without giving away your secrets.


Here is that admin panel, showing off its five internal elastic webbing loops, for pistol magazines, flashlights, multi tools or a variety of other chunky items. On the outside, two more wide elastic loops run lengthways, each topped out with a second, narrower elastic bang, sectioned into two, ideal for pens, glow sticks and markers. Finishing it off is a zippered pocket, giving you a very versatile and being hook-backed, modular piece of accessory to suit your needs and loadout.



Lastly, here's a shot of me having slung the bag from back to front, showing off how level it rides. From here I could quickly access all three compartments with a yank of the cord-fobs, and get at my needfuls. Ideal in a travel situation, ideal in a hazardous situation. When I'm hauling a big load on my back, but still want access to my iPad, papers, food or EDC kit, this functionality, being able to have a comfortable, slung pack at my belly comes in very handy. Whilst a bit too small for my comfort as an everyday pack, (because I haul a lot of junk around) my partner Omega was quick to snaffle this one up as an out-and-about pack, that wouldn't weigh her down, be too "hooah" looking and tough.

This sling bag is all of that. And more.