Wish-lust: BioLite CampStove

In the lead up to the Hurricane Sandy landfall that hit the US East coast hard over Halloween 2012, I saw a great looking multi-function stove come past my friends feed, and it immediately took my interest. This is the BioLite Camp Stove and here's why I want one.

 The photo below shows a bunch of power-deprived NYC folks charging their phones at a  street-side kiosk running several of these stoves.

http://biolitestove.com/campstove/camp-stories/camp-stories-all/biolite-team-on-the-ground-after-hurricane-sandy.html

The stove itself is pretty simple.  With a packed height of 21cm (8.25") and 12cm (5") wide, weighing 935g  (2 lbs 1 oz) It is built to burn sticks, pine cones, pellets, wood chips, or other lightweight, small fuels and the frame will support a bot of up to 3.6kg  (8 lbs) or 3.6L (1 gallon) of liquid.
The real magic however, is that the orange module on the side is a thermoelectric generator.

As well as being fast to boil (a reported 4.5 minutes to boil 1 liter of water) the fire has a calculated 3.4 kw (lo) 5.5 kw (hi) peak output, which the thermoelectric generator can output via USB as Max continuous: 2W @5V, Peak: 4W @5V which apparently is sufficient power to charge and run most USB-chargeable devices including smartphones, GPS units, flashlights and the like.


Some reviewers have noted that these aren't especially efficient and I am looking forwards towards my first venture in this regard, with my tPOD1 Kickstarter on its way soon ... but the large scale BioLite, combining both power generation and cooking facility in one, sparks a distinct interest in my multifunction wish-lusting!

Review: Triple Aught Design - Amphibious Cargo Shorts

As it heats up, I wanted to get some shorts that would both fit (yes, I have apparently grown as I have matured and done more running) and would be able to take with me whilst camping or adventuring. One such adventure was the Stampede Mud-Run, which I will discuss in a post soon. I had been in touch with Mr Tay Choon Mong of HorNest, and he put aside a pair of the Triple Aught Design Amphibious Cargo Shorts for me.

I'd been a fan of the TAD Gear for a while, and when I saw their line of Amphibian Cargo Pants get some screen-time in the blogosphere, I kept my eyes out for what else would come from these guys. I already have a couple of little things of theirs: patches and Ranger-eyes so I was looking forwards to more. There were no exception.

Made from an "Amphibious Cloth" which is to say 100% Nylon (3.4 oz) with a DWR Finish (Durable Water Repellent), the material is silky to the touch and light. You can see a 1" loop field poking over my right thigh, with a TAD logo Ranger Eye glow in the dark patch fitted to boot (Thanks Hornest!)

Made for movement with a gusseted crotch, and clean seams, they provide unrestricted movement running or clambering, whilst still being comfortable when I am chair-bound. More importantly, they are "Engineered for Abuse" with triple needle stitching on the in- and out-seams, and the pockets and seat are also reinforced to enhance ruggedness.

What about pockets? Well let me get you going here: These shorts are constructed with five sets of pockets! From the front you can see Two Front Welt Pockets, which each having a D-ring hanging from below the belt loop, these were both deep and broad enough to take my iPhone 4s in its Opt Silicone Armor iPhone case, and the carabiner on the bottom of it clips nicely onto those D-rings. They also make good attachment points for my paracord lanyard.



Two hand pockets, come in where you might normally expect them, and also feature a deep (two knuckle) coin pocket, which is probably sufficient to hold a pistol magazine, if that's your thing.

The thigh cargo flap pockets sitting mid-thigh passed my favourite test, they fit my iPad1, but more importantly, feature with hidden dual-button closure, with drain hole grommets. I put these to a good solid test at The Stampede and can report not only did I NOT scoop up pocketfuls of mud, but the water that I took on rapidly drained away. and Thru Slot. You can see the length of fabric ending with a D-loop poking over the top of the iPad here. This sits inside the cargo pocket, letting you secure items, but it doesn't stop there. On the seam-edge of the cargo lid flap, is a cutaway gap, allowing you to feed items into, or have them slung out of the pocket! Cables, cord and tubes, oh my! I thought I had torn the stitching, and was thrilled to see it was a feature. Awesome!


On the backside, the two rear flap pockets feature the same hidden dual button closures as the thigh Cargo pockets, which not only means your gear stays in, but the wilderness stays out! I don't often use my seat-pockets, having a bony ass, so being able to button-up and forget is a great option for me.

One really exciting feature that I only noticed after washing them inside out was the two hidden passport pockets on the rear inside, hanging off the back of the flap pockets, to hold your personal documents discretely: passports, tickets, visas, whatever. They aren't waterproof , so be advised you'd need to wrap whatever you stuff in there, but a great option to have when traveling in unpleasant places.

All the buttons are affixed with nylon webbing with bartack stitching for greater staying power and quick repair out and about, rather than being sewn directly to the pants. The fittings are all plastic, making these, when combined with a nylon belt buckle seen on the 5.11 TDU belt, make these an airport safe pair of pants! I "go commando" and they are very nice to wear, the gusseted crotch, and clean seams really coming to the fore there.

Probably the best thing I can say about these shorts are how well they fared in some pretty rough conditions. The Stampede mud-run may have only lasted two hours, but I was climbing over logs, crawling through mud and rocks, running through ponds and mud-pits, and they just shook it all off.

Have a look at the picture and tell me what you think. If I hadn't wanted to wear them to work, I think I could have just hit them with a stick a few times and knocked the dust off. They dried off SO quickly, that the only reason I was damp was what I was wearing under them.



Totally worth the investment!

Home Front: My Precious!

Photo yoinked from my Aunts Facebook page of the view she had

I have family in Colorado Springs who were threatened by the recent fires there and being way over this side of the planet, there was bugger all I could physically do to help, except offer some advice based on my experiences in the Black Saturday Fires. They didn't really have a lot of preparation time, and the fires were fairly unusual, where as here we have a "Bushfire Season"  so all I could do was give them some strategy to escape and avoid, and what to pack when they did.  My Aunt and her husband are no fools, neither is my Uncle, and I had no intention of teaching any of them to suck eggs, but this is kind of my schtick.

 
I recommended my Aunt pack 72 hours of clothes, food and supplies for her pets (if she was taking them), water, as well as extra fuel, her important documents, maps and phone chargers. Being what they were, fires are something you can "go back home, after" even if there isn't much left of home. Once everything is burnt, it won't burn a second time, which sets these events apart from floods or other natural disasters, which leave an area wrecked AND dangerous for a while after the event. Once they were clear of the fire-danger, life would have gone on nicely, and society carries on. You can buy nappies, pet food, and more clothes. Hotels are still open, Credit Cards and online banking still works.

 It reminded me though, of the need to know where all my own precious things were, in the event of a "bug-out, your home is about to go away" emergency. I know I have some difficult to re-obtain documentation: my passports (yes, 2), my weapons collectors permits, divorce papers, financial settlement papers, birth certificates for myself and my daughters. Fortunately, these are in a file that can pretty easily be grabbed and stuffed. It then occurred to me, as it did when preparing to evacuate from the Black Saturday Fires (and to some extent, from my home in Dubai in the lead up to Desert Storm) "What precious things would I hate to loose if all of this was destroyed?". This was not a "society ending" or "head for the hills" evacuation and survival decision, more a "this house may be gone tomorrow, take what you love" one. The list was something like this: my family heirloom American Civil War sword from Gettysburg, our external HDD farm, which holds a lot of our combined music and many of my photos, and my crocheted Godzilla, who's been with me since I was a toddler. Everything else could burn, and be replaced, or is already part of my EDC and/or bug-out loadout.

What about you?

Review: Maxpedition iPhone holster

On ANZAC day, after going to the parade with Triceratops Girl and Tactical baby, I visited my good friend at his place, and she showed me his new daypack, which I reviewed the other day, he was quick to point out that the pouch on the main chest strap was a separate piece. I was taken by that piece too, pulled it off to look at as well. Turns out it was the Maxpedition Phone 5" Holster in the "clip" configuration. I borrowed a spare phone, slipped it in and took some snaps.
 The construction is a taco of 1000d Cordura type fabric, again Teflon coated for grime resistance, and heavily bartacked throughout.


 Like all Maxpedition gear, the internal seams are fully taped and sealed. This might be overkill for a phone pouch, especially one that is only a partial cover, but it shows consistency of construction and attention to detail. Apart from the webbing loop and Fastex style clip closure, the pouch features a wide band of elastic to cinch the phone in place. These combined methods ensure a very firm hold on the phone, with no slip or sway noticeable.

The back of the pouch features three bands of webbing, which act as an attachment point for the heat treated heavy duty spring steel clip, which has a jet black powder coat, which will accommodate a belt loop up to 6.35cm (2.25") wide.


The clip can be replaced with MALICE clips or Maxpeditions own TacTie attachment strips to affix it to PALS/MOLLE webbing. this variety of attachment options appeals greatly to me. I also liked the way the pouch was able to take the phone seen here in a case, with both plenty of room, but also held it snug, still leaving the camera exposed. Whilst leaving the device somewhat exposed, would allow for timed photos or video to be taken whilst wearing the phone, an idea that greatly appeals to me. This is a cool little pouch, and I may well consider picking one up for myself.

Review: Platatac Recce Map Pouch

Welcome back viewers, I've been having urban adventures and haven't had time till now to post something, but here we go, hot off the shelf and field tested Thursday night whilst on my Tough Mudder training run.Its been raining a lot here in Melbourne, and I wanted something to house my iPhone whilst I was trudging around the course so I could check my pace and time with the Trails App I use. Previously I've shown you the iPhone case I use which, combined with a screen guard, gives me some incidental rain protection, and has a carabiner to attach it to myself, but for running, I wanted something that would be strapped down, to avoid the flapping gear-effect. Its bad enough that I wear boots and cargo shorts, compared to my lycra and Nike wearing team-mates, without having tech swinging off me as well. So I of course, turned to my favourite Tactical gear supplier, who had a solution for me! This is the Platatac Recce Panel.

It consists of a 1000D Cordura pouch fastened with a hook-and-loop strap, that is mounted to the wrist by two wide elastic cuffs, which feed through loops in the heavy 25mm webbing sewn into the back of the pouch. The loops and pouch itself are ambidextrous, just a matter of swapping the sides and adjusting the elastic loops to fit. The elastic comes with heavy nylon buckle furniture and hook-and-loop fixtures. On my bare skinny wrists the hand-end loop was in fact too thin for the hook-and-loop to bite, so I need to loop the elastic back through the buckle, which worked just fine, all in all giving a very secure and stable platform for all my Predator Wrist Device needs. The spine of the pouch sports an elastic pen-pocket, which is a nice touch. I need to find myself a good sturdy pen to fit snugly in there, "for close encounters". The magic of this pouch however is within the cordura flap. There are two heavy clear plastic pockets, one folded on top of the other, for storing maps and documents.


 The"top" pouch is double sided, and features an unsealed(but "internally" opening close to the middle seam, which comes as the first layer when the pouch is opened up. Closer to the wrist is a single-sided pocket, also clear plastic fronted, with a hook-and-loop seam on the one side. Wearing this on my left wrist, the hook-and-loop is on my arm-side. There is sufficient room in the inner pocket to fit my iPhone4S in its case, and seal the pouch up, and still have my headphones trailing out (to listen to music and the Zombies, Run! immersive running app I also use. However, in its case, the screen is difficult to access, and the capacitance is reduced. Out of its skin, everything worked just fine. I found this to be a great addition to my running kit, and whilst I wont be taking my phone on the Tough Mudder, I will certainly consider using this for both my regular camping and adventuring, and as part of my Stargate Lasertag LRP kit. Having maps and orienteering documentation on hand, as well as GPS data from my phone will be a very desirable. I was thinking I could mount one of my solar collectors to the back of the unit, to charge-on-the-go.

This was an occasion where the tool really does fit the need, and I am very glad to have added this to my collection and to my kit.

Review: Going Solar!

When the going gets rough, and the lights flicker out, we will want to power and run our gadgets and drive back the night with the familiar glow of electric lights. I've been collecting solar chargers for a while now, and I thought I would give you a quick review of them.

First up is the B-Squares Modular Solar Electronics which I backed on Kickstarter. This allows the user, in theory, to run a USB outputting rechargeable triple AAA charger, a set of LED lights, or a iPhone charger. The single solar square generates 0.325W of power, which is enough to run the LED's, charge the batteries or run the iPhone. Or at least, it's supposed to. I have had little or no luck with it, and am afraid to say I've been very disappointed with this device. 

 The second of these devices is the original Solio Universal charger which is a mains-capable charger, with a battery pack. It folds out into a tri-leaved floret  is capable of output ranges from 1.5 to 5W, the internal rechargeable battery has a capacity of of 3.7V 1000mAh. It comes with a variety of output ends for the included cables and will even charge iPhones via a USB output. One cool feature of this is that it can be orientated by feeding a pencil through the central hole, propping it up to achieve maximum solar  contact. I've been very happy with this device, and take it camping and adventuring with me frequently.

Lastly is the solar charger that came with another Kickstarter project, the Packlights which I have previously reviewed. I delightful sweetener to their deal was the inclusion of these purpose built charger and battery packs. Also mains-chargeable, these these packs generate  0.77W at a Voltage of 5.25 +- 5% and the internal battery has a capacity of 2200mA with an output of 5.6V at a maximum current of 600mA. It includes a USB output, and both a bright LED light, and a dim LED charge indicator. Another interesting feature is that they give estimated times for charging, which are: by Solar Charge:10-14 hours depending on lighting & weather conditions and by DC Charge: 2-3 hours where the charging current: 140mA (per hour). This is a really nice package, and I'm very glad i acquired two of them. They fit nicely stowed into one of the Platatac FUP pouches so I can imagine wearing them out in the field, ready to recharge my tech. 

Review: Opt Silicone Armor iPhone case

When I upgraded to my iPhone 4S, I decided that I needed a new, rugged case.  I had looked into a Kickstarter program for a rugged, waterproof case, but when the big fuss over what the iPhone 5 would be like when it was released, and I chickened out. big mistake. There was no 5, and the 4S as we all know looks just like the 4. So I backed out, and thus, missed out. In the mean time, I needed something that would protect my new shiny iPhone. In my foray into the local iPhone skin shop, I came across this. Here is the Opt Silicone Armor Case. This isn't the first semi-rigid rubberized iPhone case I've had, however I think it is the best one I've had.

It has a grippy texture, rather than being slick, with ample knobby structures to give it positive hold in my hand, but not so much as to make it snag when withdrawing it from ones pocket. The case itself has openings at the back for both camera and flash, and an opening to show of the Apple logo, but fits so snugly that I haven't had an issue with dust accumulation. The earphone jack and mic opening is also sufficient for every headphone I've used with it thus far (a problem I've encountered in past) and the data port at the bottom works on the bases I have.
Most impressive however is the wire exoskeleton that holds the whole thing together and gives it its rigid structure, as well as protecting the corners (a common breakage point, I've noted). It also gives the case an attachment point for the included webbing and carabiner, which is an excellent means of retention. I clip mine onto my vest harness, along with my keys. This not only keeps my phone from falling, but the distance it gives is pretty much perfect for me to check my phone for messages and access to apps, all with "drop everything" security. It isn't the full immersion case that I was initially looking for, but it's sturdy, grippy and latches onto my kit, belt, bracelet, whatever. Good compromise, and keeps my shiny toy safe.