Review: Go! Outfitters - Apex Camping Shelter

Here's an addition to my camping hammock collection that I really wanted to get out to you ASAP, as it was a pre-release and is being launched via Kickstarter imminently. You may recall the Go! Outfitters camping hammock that I backed and covered not too long ago, as an addition to my hammock suite, which was a fully enclosed two part hammock, with an asymmetrical cut, to allow a flatter, more comfortable sling.

The enclosing flyscreen made it an ideal hot-weather outdoors hammock, and its built in ridgeline made it fairly easy to sling a waterproof tarp, or a poncho over to add some protection from the weather if needed, but Jason and the folks behind Go! Outfitters
already had something in mind, and that has come to fruition with the Apex Camping Shelter.

Less involved than the Seirra Madre Research Nube, the Apex is essentially a stand alone, purpose built shelter tarp, designed to be used in conjunction with the Go! Hammock, but equally suitable for any hammock, or even on its own.
The Apex is made from 70D polyester with PU (polyurethane)  waterproofing, in a elongated hexagon shape, much like an animal hide, and measures 335cm (11') along the ridgeline, and 290cm (9.5') wide. This makes it both long enough to enclose the G0! Hammock, but also wide enough to drape down around it, with a sizable leeway given at the top to stand up in, giving you ease of entry and exit to the hammock.

The ridgeline seam is factory sealed with tape for additional protection not only from the weather, but also taking the strain of keeping the Apex taut as well as reducing sag or bowing.


The Apex comes with a set of 6 stakes, and 8 guy-lines for both attaching to the tree you are hammocking from, but also to stake down the sides of the tarp. It comes with 6x 240cm (8') guy-lines and 2x 455cm (15') guy-lines, which really adds versatility to your set-up. The supplied lines are from a pretty common kind of nylon cord, not my favorite, but water-resistant and light.

Along the perimeter, 20 tie-out loops have been sewn in, for maximum versatility in the way and stability of the layout, given the situation you set up in. Each tie-in loop is affixed with a large triangle of sewn in reinforcement, which was an excellent consideration. As well as the ridgeline and corner points, the edges featured an additional 3 loops per side, whilst the ground-facing long edge of the Apex has a single extra. The side loops are likely to play host to a rumored Door Kit (watch this space), and the long edge loop can be set up with additional poles to add an even roomier, canopy-like interior.

The whole Apex kit comes in its own stuff-sack, which I was sad to see wasn't sewn into the body of the tarp, which would have matched the elegant solution the Go! Hammock had, but I can see why it wasn't. Doing so would leave a sag at which ever edge it was sewn to. An engineering problem for the next version perhaps! All told, it weighs around 800g (28oz) with 225g (8oz) being guy-lines and stakes and
565g (20oz) for the tarp itself.

The Apex Camping Shelter will be coming in Forest Green and Slate Grey and really rounds out a camping hammock kit, without adding significant bulk or weight to the mix. It was super simple to set up and pack-down, and I think it will be coming with me whenever I go camping and even out on long hikes. Staying out of the weather can not only be comfortable, but in some settings, really conducive to your survival.

Check it out when it goes live on Kickstarter!

Review: Go! Outfitters Hammock

I had one of my awaited Kickstarter projects come in not too long ago and I have had some fun setting up up, and working out the configurations of.

This is the Go! Outfitters Hammock, which I had Wish-Lust'ed and even followed up, when the stretch goals were released.

I love hammocks, and get into them as often a I can manage. I have quite the collection these days, with the Sierra-Madre Pares hammock, and its Nube tent system. I even have a, Hummingbird mega-hammock
and a backpacking EaglesNest Outfitters hammock.

I opted for the fully kitted out version of the Go! Hammock, which includes a built in mosquito net and optional tree straps with cinch buckles. These webbing straps have a sewn loop at one end to feed through themselves, around your anchor point, be that a tree, mounted hard point or girder.

The cinch buckle itself is fitted with a loop of high performance cord, which is Amsteel. Che cinch works really well, and makes adjusting the hammock a breeze. It's just a matter of strapping and cinching.



The second optional feature is the Ridgeline cord, This is a lighter cord, also Amsteel in 7/64", has larks heads knot which can be looped through either the included steel carabner or through the heavy duty cords that feed through the hammock to hook it up.

The Ridgeline lets you hook up the hammock at exactly the right tension every time, as it's length is pre-set to give the optimal positioning. It can feed through the eyelet at either end of the flyscreen, from inside to allow you to suspend the flyscreen over the line.

When the Ridgeline is fitted internally, there are three loops of the same flyscreen material the rest of the top cover is made from that are spread evenly to ensure the fly remains securely fitted, although this means that you cant shrug it off and over if you choose not to use the fly later on, without taking the hammock down to adjust.








It is also possible to run the Ridgeline outside the hammock, which drops it lower as it adds length to the hammock attachment points.

There are three external loops to run the Ridgeline through so it hangs lower, which is not such  a big deal, but it can give you a little more sag if thats better for you.

The hammock is fitted with twin double sided zippers so you can climb in or out, and seal yourself away from flying or crawling biters. Even if you're only four.

The zippers are probably the weakest part of the whole setup; they are a very fine toothed zip, which seems to bind up a little bit under the tension of bodies in the hammock, some adjustment is needed in order to do the zip up all the way. No big deal for me, but made it hard for Tactical baby.

The inside of the hammock is really lovely design, the asymmetrical cut of the body allows very comfortable, stable bedding. The higher sides on either edge cradle the head and feet, rather than press down on them, in the way that other more symmetrical hammocks do, when you lay cross-ways. This was again nicely demonstrated my Tactical Baby, who also loves hammocks, and hates personal boundaries.

Another really nice feature of the Go! Hammock is that it features guy line attachment points, (and includes guy lines and tent-stakes) for you to set up, to tension the flyscreen, in order to give you a nice solid setup.

There are also fly attachment points on the body of the fly as well, to give you a truly tent like experience. This was a really cool addition to my camping setup, now that I have four individual hammocks, and one really large one, I could probably host an entirely suspended camping trip.

Treetops anyone?

Update: Go! hammock stretch goal.

I covered the Go! Hammock a little while ago as a Wish-Lust item. Jason Montgomery, creator of the Go! Hammock Kickstarter tells me he has had lots of people asking about the possibility of adding a bug net option. He is pleased to announce that all backers will have the option to upgrade, for a fee. He isn't yet sure about the upgrade price yet. 

This version of the hammock will have an integrated bug net that is sewn on.

A long zipper will be set along one side of the net to close it. The hammock can be used without the bug net by removing the ridgeline from inside the net, flipping the hammock over. The upgrade will include four stakes and four pieces of shock cord for tying off the net to keep it our of the way. 

Go check out the Kickstarter here!

Review: Sierra Madre - Pares hammock

As first seen on BreachBangClear!

I covered the tent-component of the Sierra Madre Research system, the Nubé not long ago, and I wanted to also show off their very well thought out hammock component as well.

The Pares hammock system follows on from the design philosophy as on the Nubé, with its 100% nylon fabric body, lending it softness to the touch, stretch for comfortable shaping, resilience to UV degradation and both fast drying and breathable for comfort even on rainy days.



With a packed weight of 640g (1lb 6.5oz) the Pares stretches out to a massive 3.3m (10'9.5") long and a stretched width of 1.98cm (6'6"). This of course only gives you an indicator oh how much fabric is involved, not necessarily the usable space, but we'll get to that.

Packed into its own Pares Compression bag (SMr’s dry bag design), it bundles up into a 14cm (5.5") x 14cm (5.5") x 12cm (4.5") ball, with a long flap suitable to stowing both the accessory straps and the carabiners used to set it up.

Again as in the Nubé the compression bag features webbing that feeds from a single loop, so you have no dangling ends, and the loop itself is an attachment point. It's a very subtle addition and adds a lot of value. Simple a one handed pull on the loop tightened both sides.

 The Pares is recommended for a nominal user weight of 140kg (300lbs) but has a full tested strength of 450kg (1000lbs) so if you're either loaded down with gear when you hit the sack, or are just a big, solid kind of sentient being, you should be ok.

Nearly 50 percent wider than the ultra light xPlor model of the SMr range, this is a more spacious hammock than the others I've used any time recently, if you dont count the purpose built multi-person ones and provided me several comfortable nights sleep out at an event. I'm a tall critter, at 6'4" and my wingspan is almost 6'6", so to have a hammock that I can lay in sideways, couch style and still have room to go, sideways, was a big plus.

One of the things I really liked about the Pares was that those top layers, the light green, not only added padding when gound couch-style, but when laying down longways, curled over forming a cocoon, enveloping me and acting as an extra-bug screening layer. They also added some privacy when I was changing, and also when in bed, doing some reading by Orb-light.

The Pares includes a couple of really interesting features that set it aside from other hammocks I've used: Attached to that outer lip at two points, one at each end, on the right hand side if you're laying in it, are grab handles, which really help getting around within it, by letting you shift up or down in the otherwise silky nylon, as well as getting in and out easily. These are sewn into the well made top seam fairly securely, and I didn't have any concerns hauling myself up and around by it.

The other feature on the body of the hammock worth noting are the two attachment points at the mid-line.

These twin pieces of nylon hardware feature a loop-hole, as well as a webbing-wide hole, and can act as both a gear and accessory hanging points, but also fit the internal clips on the Nubé, inner liner, opening up the Pares from that cocoon effect.

At each end of the hammock is a heavy bundled knot, where all the fabric is drawn, and a loop of cord is exposed. These are where you affix your hammock to whatever you are suspending it from.

Those connection loops will let you fit any kind of attachment, but the Sierra Madre team have their own system. Their EZSlings allow you to easily hang your Pares hammock in less than a minute, or a little longer if you are fitting it with the Nubé as well. These consist of 315cm (10'4") of tubular webbing and high strength cordage with loops at one end, to feed through itself, and to the hammock at the other end. The cord is doubled and has a set of staggered knot to give you graduated attachment points The straps are rated to 450kg (1000lbs) as well, and the pair only weigh 185g (6.5oz).

To round off the package, they also protect the tree from scarring or any other damage that may be caused to a tree by small ropes used to hang your hammock. Looping it through itself makes a really secure hold to whatever you secure it to. I found that those graduated knots really made it difficult to get the hammock to just the right spot, I found. I adjusted it a few times, but had to do some fiddling to make it right, too much sag is too not good in a hammock. Not insurmountable, but annoying. I found myself touching the ground a couple of times until I adjusted it.I could have set it higher, but thats not the point. Still, it's just a matter of adjustment.

SMr also fit out their deluxe package with a couple of wire-gated carabiners to let you have clip on access to both the slings, and the attachment cords for easy, secure set-up and take-down. They themselves have a 22KN axial load rating and up to 2265kg (500lbs). No fear of falling on your ass from that angle, anyway.

One last cool thing with the SMr system, you can sling a second hammock under the first (if you have enough clearance) to create what SMr call Hambunks. This is a cool idea, and probably excellent with kids, but I don't think I'd want to have one of my buddies asses right in my face all night.  Not the way we eat in the field ...

This is a seriously comfortable hammock, and I really enjoy hanging out in it, camping 000

Review: Sierra Madre Research - Nube hammock tent

I have been waiting to get a good set up to take pictures of this next piece I wanted to share with you all..

Quite some time ago I backed a Kickstarter project for what  I thought was a pretty far out idea. A tent for a hammock. I love hammocks, you may recall I have several already, from the vast 5 person Hummingbird Mega-hammock to the pocket sized adventure ready Eagles Nest Outfitters hammock.

The folks at Sierra Madre Research came up with an answer to a question that has been posed by hammock lovers: how do you get tent like comfort in a hammock?

This is the Nubé.

The Nubé (pronounced "new-bay" for those who don't know how to pronounce the squiggles) is more than just a hammock shelter like a tarp or other top-cover, it’s a more like a safe haven for you and your gear wherever you are. Regular tents are subject to ground water, lumpy terrain, and all kinds of ground critters.

The Nubé is a complete hammock shelter,  which not only acts as a very broad rain cover, is fully enclosed with mesh side, protecting protecting you from insects, snakes and facehuggers. It keeps you and your gear elevated and protected, letting you hang out in comfort.

The Nubé is designed to be compatible with any camping hammock system and does itself not bear any weight. It attaches to and is suspended by your hammock suspension system, which in turn bears your weight and the gear stowed in the underslung Gear Stash below.

At the top of the Nubé is made from a 40 Denier nylon rip stop with 2 coats of silicone on the top and bottom of the fabric. The corners of the rain-shield hosts the Sky Hooks, a pair of reinforced webbing straps connect to 3mm Dyneema cordage (with easy-spot reflective tracers in the weave). These attach to hammock suspension system and are held taught by it.












At six points around the base of the cover, 2mm Dynema cords attached to similar webbing straps (which all also bear reflective flashings).

The cords tied down to the very nice aluminium mini-star picket with eyelets to feed the cords through, so you don't loose them when you're well off-grid somewhere. The tie-downs are notched to facilitate better attachment.

These come in a pouch that attaches to the tent pouch. This is probably the least elegant part of this system. The tie down cords wrap around the webbing, and are kept in place when in storage by a very clever hook and loop flap built into the webbing.


The Nubé fits around the hammock and completely encloses it, and works its way up the attachment system cords at both ends, and has Verso Closure Sleeves an elastic drawstring sphincter, with a cord-lock. These seal down around the main cords and not only block the rain, but also keep out bugs and all manner of creepy invaders.

The whole Nubé weighs  1.2kg (2lbs 10oz) and when fully set up is 3.6 - 3.9m (12 - 13') depending on how far the end Closure Sleeves are set up.

The Nubé sits at 2.7m (9') wide, not counting the tie down cords. That is a lot of umbrella coverage, which really impressed me.

And then you need to see the INSIDE of the tent.
The mesh bug-shield is fully integrated with the cover and zippers shut, along the whole length of one side. There are toggles spaced along the opposite wall allow you to tuck it all away as needed.

There are lots of internal features inside the shelter as well. On both sides there are two triangular pockets which both also feature gear clips at the bottom. The height achievable from the ground is based basically only restricted by where you have slung your hammock, but I have found that I can stand up fairly comfortably stand (at 6'4") in the shelter at the height I like slinging my hammock. There is even room to sling a SECOND hammock, forming what Sierra Madre call a HamBunk, (seen here in green and orange).

The base of the  shelter is where the Gear Stash is located, made of 70 Denier nylon with a rip stop weave (with a PU coating of 1200mm) along the very bottom of the mesh lined bottom half and it is almost long enough to act as a mini hammock all on its own (it's certainly big enough for Tactical Baby, now 3, to lay in happily).

 The Gear Stash has it's own suspension cord, and a cinch closure as well, which keeps it off the ground and secured. As the Nubé is not designed to be weight bearing, the fact that the Gear Stash has it's own cords means that you can really load it up.

I was really impressed with every aspect of the Nubé (apart from the peg bag, but I also cant think of a better way to store them, so I won't complain too loudly).

The Gear Stash is quite spacious, and I can imagine you being able to fit a bunch of stuff down there, it's long and narrow, so a big wide pack like an MALICE 2 pack might spill over the sides, but it can certainly take a number of narrower packs, like the Platatac Nomad covert, and the Mystery Ranch 1Day Assault Pack easily enough, even togther.

One of the really cool things the Sierra Madre team have thought to add are a number of QR 2d barcode links to "how-to" for each of the features on YouTube. I found this really useful (and thankfully when I set it up for the first time I was in a service area), and the tabs themselveswere of a long lasting plastic, so hopeully they will last for next time I am caught scratching my head lookign at a web of parts.

That said the Nubé was remarkably intuitive to set up, but with so many features, its worth doing your research and learning how to use it most effectively. All the Seirra Madre products are fitted with compression sacks, and even these had had a lot of thought out into them.

The Nubé sack features four tightening points, but these are made with two U-shaped loops of webbing, so you have no loose trailing ends, and a carry handle built in. It packs down to 25 cm x 15 cm x 15 cm (10" x 6" x 6") and is a neat little ball.

Everything about this system was really well thought out, and I'm really looking forwards to my next outdoor sleeping experience (post-apocalyptic LRP "After The Fall").


The Nubé is constructed by skilled hands in SMR's manufacturing facility SMR ILLUMINATE in Managua, Nicaragua. They also do humanitarian work, it gives me a good feeling to know that not only did I back the creation of a cool product, but the people that do it go on to make the world more robust.

Stay tuned for reviews on their other components to the Nubé system:

• The Pares Hammock, the purpose built, deluxe platform to base the Nubé around.
• The xPlor hammock, the base level hammock, perfect to add to build the HamBunk twin system.
• The Nubé Floor is an accessory that gives you the ability to set up your Nubé as a ground shelter, without trees.
• The Nubé Winter Barrier is an accessory that gives your Nubé 4th season protection. 

Review: Great Outdoors - Silver Grande 9L

Having quite the expansive family these days (3-4 adults, 1-2 little kids, depending on who is around) when we go camping, (which really isn't often enough) we try to make the most of it, and be as comfortable as possible.

Once the little ones have grown up a bit, we might consider more hiking type trips, but until then, we camp where we can unload the SUV. That means we can afford to camp BIG. This means, in this case, we can take a big tent like the Great Outdoors - Silver Grande 9L.


Unfortunately it seems the "Great Outdoors" line has gone under, but similar tents like the Spinifex Franklin, or the Wild Country - Getaway II 9MR but none that I've found in my recent searches have the four-room option that the Silver Grande features.

 The Silver Grande is split into four distinct areas, each with a 360o zippered vestibule, and close-to-the-flood bulkheads. The whole of the base is bucketed to a good height, ensuring that the interior stays dry in inclement weather.

image swiped from eBay

This really is quite the palatial tent with measures 6.4m in overall length (2.1 x 2.2 x 2.1) and 3m wide in the middle, 2.15m at the end rooms. The front room adds another 2.1m to the width to a total of 4.3m. The side rooms are a little bit shorter than the main central room, which tops out at a very respectable 2m15m.

With all the internal doors open, and wrapped up in their self-storing toggle and loop attachments the interior is really very spacious. The walls are at a high angle, so you maximize the available space, so often lost in lower dome tents. The internal walls are all a very light, breathable material, and well fitted. Window and main exterior doors are all fitted with a translucent insect proof mesh, with clear PVC windows and a skylight in the flysheet.

two sets of colour coded poles make up the structural supports, and each is designed to slot into sleeves built into the inner shell, and mount on captive pegs attached to split rings, attached to the base.

image swiped from eBay

The fly itself is a silvered 3000mm rated waterproofed polyester. It has hook-and-loop tabs situated at key points to anchor it to the poles for added wind resistance. The inner shell also features clasps on elastic loops, ensuring both a taught but also stable attachment. Without the fly, the tent is very light and airy, with the large swathes of mesh siding and the very light material of the walls letting light stream in. The silvered fly adds a significant level of shade, without being gloomy, and dramatically cuts the wind. It also blocks out harmful UV radiation, and keeps the tent cool in the Australian sun.

With the doors open, or at least set up in the awning-up configuration, with each of the side rooms having the option to put one up, and the main room from the back side also can be set up as an awning. One set of poles are provided to do this.

The rooms all have sets of pockets built into the walls, either in the corners, or in the under-window areas.

image swiped from eBay

There are also loop attachment points on the ceiling, and the internal door toggle and loop fittings also provide attachment points, for lights, clothes and the like. The storage setup is quite thoughtful, ans also takes advantage of the high-angled walls effectively.

The tent's "front room" doesn't have the same bucketed floor as the main body of the tent, but does feature an attached floor that is mounted to the front wall of the main room. The flysheet covers this area and provides a sheltered, but not sealed enclosure. We typically use this area for gear storage, leaving our camp-kitchen, food stores and the like in here, and as a boot-changing area.

image swiped from eBay

Not being sealed, you still need to be aware of bugs and other creatures getting in and around your gear. This can be a real concern for those of us who live in Australia. Or perhaps in North America if you have racoons and bears to worry about.

This is billed as a 9 person tent, and there is plenty of room for that many, if you make good use of the floorspace and don't need to have too much walking around room. We generally have had one of the side rooms for Tactical Baby and Triceratops Girl, with their fancy collapsible camp bunk bed, the main room and the other side room for the adults. In doing so, we can open or close the internal walls for (visual) privacy, and also use them to keep any bugs in or out, as the case may be. The walls are translucent enough that lights can be shone through them, to give a nice ambient glow and a central lantern can illuminate the entire interior sufficiently for everyone to find their beds and boots.

Being a thin walled tent, you obviously don't get much in the way of sound dampening, so be sure to pick your company and camp site well!

The flexibility of having doors for each room was a great addition, especially as we use the central room as the main bedroom, but left me with the concern that the zipper-capable little ones might wake up, and wander off into the bush at night. This was easily solved by extending the exterior door zippers all the way to the top of its arc, well out of little-hands reach. We also left the internal door unzipped at little-people height, so they could come in to us if needed, but still providing some more of the bug-limiting compartmentalization.

One feature that we've never made use of are the floor-height zippered cable and hose ports, situated just above the bucket sidings in the rooms, allowing us to feed power or plumbing into the tent. Even at powered sites, we don't tend to bring mains-charged items with us, so this hasn't been needed.

Just remember, this all comes at a cost, weight. 28kg of weight. This is a big tent, and whilst the bag is easy enough to stow in the back of the RAV4, a bit unwieldy (it's dive-bag sized) and it has wheels on the bottom corners, but it is heavy. Way to heavy to hike with. This is a drop and build base-camp item, not a roving set. That said, with instructions sewn into the bag, and colour coded poles and sleeves, (which we augmented with permanent marker, to indicate which way around the fly needs to sit) the whole thing takes about 15 minutes to put up, and 20-25 minutes to pull down and pack up. All in all this is a great family tent, and if we ever needed to abandon home for any reason, and have no fixed plan of where we might stay, I would strongly consider this as a temporary retreat.

It certainly works for short to medium term camp-outs for us.

Review: Jill Lite - Constel LED micro lantern

As a part of my care package, this very cool item was waiting for me having arrived from HorNest in Singapore. This is the Jill Lite Constel which is a pocket sized, LED powered lantern. 

The idea of a lantern that can fit in my pocket is pretty appealing, whilst there are a lot of options for using a flashlight to light up a room, but they are not purpose built. Even the Lazerbrite end caps with the glow-domes are accessories, and whilst awesome, are part of a bigger system.

These Type II / III anodized AL6061 T6 aircraft grade aluminium bodied lights are roughly bullet shaped, with a plastic dome light diffuser and a two part metal body. The light source is a 3W white LED, situated in the center of the barrel, and is wired in to use the whole of the unit as a heat sink. O-rings at the dome and end-cap provide a water seal that is rated for approximately 10 meters submersion, which is a lot, when you think about it. Deeper than a number of my "waterproof" watches over the years can go.
  
 A lithium CR123A  battery powers the unit, and provides between 30-40 hours and is activated by rotating the end cap. 

The end cap itself has some cool features, some attention to detail that I really appreciate. The split ring held in the middle is captivated by a raises island machined right out of the base, but not so much as to make it a protection risk when standing the lamp up on its own, which it does on two wide crenelations on the bezel. 

Those crenelations have slots cut into them, for lanyard strapping, and greatly resemble the handles on a beer keg. 
 
Over all the lantern is a miniscule 55mm long, and 22mm in diameter and has a really solid, rugged feel. I wouldn't be throwing it -at- things, in case the plastic end cap broke, but I certainly feel it could not only be lobbed a fair way, but would withstand a bunch of dropping, standing and "lost in the bottom of your pack" time. 

Then there is the light. For a 3W LED, encased in a translucent dome, this little lantern kicks out a whole bunch of light. Here it is sitting on a Dead Person Jar , on my bed, lights on, and off. Certainly enough output to not only navigate, but also to do pretty much anything but paint well. 
 
 I can see this lantern finding an excellent home in my camping kit, as it would be perfect for illuminating the inside of a tent, or the cook-fire, dining table, not to mention for late-night trips to answer natures call.


It is small enough, tough enough and powerful enough, that I want to add it to my EDC, and have it on hand, just in case, even with my already fearsome array of illumination ...